What's your latest SAK?
-
Awesome snags Everyone...

Sent from my iPhone using Tapatalk
-
Just completed a purchase for a NIB CT 34! Hmmm...3 CT SAKs in less than 24 hours!
Congratulations JamesJ on your purchase! I saw one CT 41 on ebay but thought it was pricey for a TSA confiscation (not to mention knowing that the owner was stripped of his/her quality SAK). I understand that the CT 41s are pretty scarce since they are out of production. Replacing the scales should be pretty easy if you can't buff out the scratches. The scales on my first CT 34 purchase are scratched and pitted and I will be replacing them.
This was supposed to be SwissChamp Sunday but it's turned out to be Cyber Tool Sunday!
Cheers!
Jim

-
Awesome snags Everyone...

+1

+2

-
@NorCalJim said:
but thought it was pricey for a TSA confiscationThis was $50 shipped, which may be too much for some but I was ok with it for this model. The tools look to be in good condition.
I have a set of classic red Plus scales lying around but I was gonna use those for a MOD. I like the blue though and hopefully I can buff them out.I start at 1000 grit if the scratches are really deep, then work up to 3000 at 500grit intervals, then polishing compound, and I just switched over to dremel with fluffy polishing balls instead of doing it by hand.
I don't mind them getting "character" from use, I just don't want it to be some other guy's "character". So I like to clean them up as much as I can and then start using them. The only thing is I've had a couple logos fall out in the past because I sanded away too much material.

-
@JamesJ said:
This was $50 shipped, which may be too much for some but I was ok with it for this model. The tools look to be in good condition.
I have a set of classic red Plus scales lying around but I was gonna use those for a MOD. I like the blue though and hopefully I can buff them out.I start at 1000 grit if the scratches are really deep, then work up to 3000 at 500grit intervals, then polishing compound, and I just switched over to dremel with fluffy polishing balls instead of doing it by hand.
I don't mind them getting "character" from use, I just don't want it to be some other guy's "character". So I like to clean them up as much as I can and then start using them. The only thing is I've had a couple logos fall out in the past because I sanded away too much material.

$50 shipped? Well done! I completely agree with your character policy. I have a couple of SAKs waiting for a new start. I would be interested in how the sanding goes with the translucent scales. Too much sanding and the removable tools will not sit flush. Of course, you could also sand the tweezers, tooth pick & pen. $50!!! Maybe you should pick up a lottery ticket while you're hot!
Jim
-
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.





-
@FolderBeholder said:
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.




That's a nice one! -
@FolderBeholder said:
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.





-
Thank you Roc and glen!

-
@FolderBeholder said:
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.




Another sweet SAK...

-
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.





Another sweet SAK...

Thanks jaya!

I forgot to mention that it is a 93mm. -
got a Minichamp for cheap!

-
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.





Another sweet SAK...

Thanks jaya!

I forgot to mention that it is a 93mm.Makes me want to have a Syph Custom even more...

-
I've been a lurker here since October, when I bought a Super Tinker at Smoky Mountain Knife Works in Sevierville, but this is my first post. I found the forum that evening, and have been enabled by you ne'er do wells that hang out around here to grow my collection since then. LOL!
I've already found a German Solingen knife with black scales, and my In-Laws gave me an Electrician for Christmas. I also found this Wenger Evo13 at a flea market last Saturday for a whopping $6! It goes without saying that it HAD to come home with me, and it's already replaced my German model for keychain duty!

Sent from my iPhone using Tapatalk
-
@FolderBeholder said:
I have this inbound. It was a used custom SAK I bought and I sent it to Canada for some spa treatment and face lift. Thank you Syph007.




Thanks for sharing! Such an extraordinary SAK!
-
After purchasing the original 1985/86 Swiss Champ model that replaced the Champion, I wanted a modern sample. Last night, I purchased a black scale Swiss Champ model 53503 and moments ago completed the purchase of a red scale Swiss Champ model 1.6795.



-
Love the boxes, and that nice sheath!

-
Picked up a Huntsman today at Target.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login