As Seen on TV Part 2- The Revenge of the Key Ninja
-
It's good to hear that you have had one long term. How do you find the bottle opener?
Def
-
I find that it doesn't give you much in the way of leverge to pull a cap off. You may get one or two off but it's not a cap lifter you want to rely on.
Def
-
I have not, but I will give it a shot. It seems inefficient as the line of force that you are applying is nowhere near the resistance of the cap,even with the added leverage of the key sticking out.
As I said, it is usable, barely, but I am glad I have other bottle openers available to me.
Def
-
@Grant Lamontagne said:
I have not, but I will give it a shot. It seems inefficient as the line of force that you are applying is nowhere near the resistance of the cap,even with the added leverage of the key sticking out.As I said, it is usable, barely, but I am glad I have other bottle openers available to me.
Def
Ah well... atleast the hole saves some overal weight

-
Do you ever have a problem with it coming loose and your keys flopping about? I have had to tighten mine a couple of times now.
I also tried removing all of the spacers, except for the ones needed to balance two keys on one end and one on the other, but that was a fail and I ended up having to put the spacers back in.
I also had to switch it so that the two keys were at the connecting end and the single key was on the far end from the keychain as that's less keys flopping about, which is a bit annoying as the two keys on the "inner" end are the ones I use more often- and that is the more awkward end to use while it is still on my keychain.
It's not a waste in the way I thought it was a waste- it is not nearly as bulky feeling as I was expecting it to be, but on the other hand the floppiness of it is somewhat bothersome. I guess what I am saying is that my original skepticism is still there, even if it has changed the path to the bottom line.
I'd consider this one a success if it had cost $10, but at $30 I would leave it behind.
Def
-
@Grant Lamontagne said:
Do you ever have a problem with it coming loose and your keys flopping about? I have had to tighten mine a couple of times now.I also tried removing all of the spacers, except for the ones needed to balance two keys on one end and one on the other, but that was a fail and I ended up having to put the spacers back in.
I also had to switch it so that the two keys were at the connecting end and the single key was on the far end from the keychain as that's less keys flopping about, which is a bit annoying as the two keys on the "inner" end are the ones I use more often- and that is the more awkward end to use while it is still on my keychain.
It's not a waste in the way I thought it was a waste- it is not nearly as bulky feeling as I was expecting it to be, but on the other hand the floppiness of it is somewhat bothersome. I guess what I am saying is that my original skepticism is still there, even if it has changed the path to the bottom line.
I'd consider this one a success if it had cost $10, but at $30 I would leave it behind.
Def
Well, I had to retighten mine about 3 times in 2 months, and since then I haven't had to retighten it.
Like I said before, I bought it for €2.5 which is, like $3?
Couldn't be more happy with it at that price, so got myself a spare one.I used a keywallet before and thought I would use one 'till the day I die, but I haven't looked back so far.
I do think keys over here are larger overall, but the fact that they extend a bit doesn't bother me at all. In fact, it gives me something to grasp my nail in.

-
For $3 I would probably grab a couple as well. The LED's are worth that if nothing else. :D
Def
-
Nice write up Grant! My best friend swears by his Key-Bar, but I, like you have too many keys to make it work for me.
-
Could the rubber-edged keys work if you put a big enough spacer between them?
-
@Grant Lamontagne said:
For $3 I would probably grab a couple as well. The LED's are worth that if nothing else. :D
Def
Grant,
Try adding a spacer between the casing and the flathead screw.
This will prevent the screw from unscrewing by itself

The issue isn't the screws coming loose, the issue is with me having too few keys and not enough spacers I think. When I first put it together the rubber o-rings weren't properly seated so it seemed tight, but then when they slotted themselves in it loosened up. Now mu keys flop around and I have used all of the spacers that came with it. I may try to cut some out of the galvanized spacer material I used to use for SAK scales.
@Syncop8r said:
Could the rubber-edged keys work if you put a big enough spacer between them?That depends on what you mean by rubber edged keys- if you mean car type keys with rubber heads, then maybe, depending on whether they are contoured or not. If they are contoured then they still won't fit in with the keys next to them. I would think the keys with the rubber rings around them would be pretty well the same, but if you were to trim a couple of spacers to level off the rubber, and then one more on top I suppose it could work, but it would take a lot of spacers and a lot of space in the Key Ninja and make it quite large for really no reason.
I am also quite annoyed all over again with the Key Ninja, through no fault of it's own. I paid $30 for this silly thing, and look what I found at my local Dollar Store for $3.

Def

-
@Grant Lamontagne said:
I am also quite annoyed all over again with the Key Ninja, through no fault of it's own. I paid $30 for this silly thing, and look what I found at my local Dollar Store for $3.
Def
You got screwed!
But I already knew that. Just didn't want to rub it in untill you figured that out yourself.
I think everyone knows the feeling in one way or another though.
Also keep in mind that you said that for $3, you would buy a couple, even if it was just for the LED's [emoji14]
-
I only have 4keys, and I don't think something like this would work for me? I mean it would but, probably just a waste, TP's carabiner would probably be something better.. I made my setup with the two clips on leather that snaps on the belt and it's been pretty good..
JR -
@MadPlumbarian said:
I only have 4keys, and I don't think something like this would work for me? I mean it would but, probably just a waste, TP's carabiner would probably be something better.. I made my setup with the two clips on leather that snaps on the belt and it's been pretty good..
JRPersonaly I just love the quietness of it.
And it reminds me of a SAK while in use. ^^ -
I seriously considered buying it for $3, if for no other reason than as a reminder of how annoyed I was at having paid $30 for it. In the end I was so annoyed I left it on the shelf and walked out.
I went back specifically to get it two days later and it was gone.

Def
-
@Grant Lamontagne said:
I seriously considered buying it for $3, if for no other reason than as a reminder of how annoyed I was at having paid $30 for it. In the end I was so annoyed I left it on the shelf and walked out.I went back specifically to get it two days later and it was gone.

Def
Aaah, even worse!
Regretting leaving something alone, only to find it's gone after going back.Poor Uncle Deff :(
I feel sorry for you buddy. -
Yes, the Key Ninja is remorseless....
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
