Shiny Scales.
-
Wow! That is an incredible shine!

What grit did you stop at?
-
That particular piece is a Victorinox Executive and it had a red tinge all around the edges and numerous scratches. I started at 1500 and used all of the pads up to and including 12000. While it is an incredible shine, it did take about 25-30 minutes of work to do both sides. Looking at the 2 photos you can still see a couple of the deeper scratches from the start are still there. I could have worked more with an even lower grit paper and probably removed all the marks.
It is not a big deal to me but the extreme sides of the scales can not be completely worked since I do this with the scales still attached to the knife. The blades and other tools get in the way for perfection, but I am happy with it.
Another thing, some may ask about the metal inlays like the shield and Fish or BSA symbols. I have yet to see ANY problems working right over the top of them. They polish up nicely right along with the scales. Of course I would not do this with any kind of screen printed art work.
-
Thanks for the info. The result was well worth the effort in my humble opinion.

I was actually going to ask about polishing the shield. I have one SAK where the shield sticks out a bit, and I was thinking about sanding it flat.
Incidentally, did you try to repair that cracked scale yet? If so, how did it go?
-
I'll just add a word of caution on the little knives. There isn't much plastic over the toothpick / tweezer slot and if you are trying to rub out deep scratches you can crack the plastic there. If you have deep scratches on any SAK and are starting out with a coarse grit it is possible to wear the inlaid shield away. I've done it

On vintage knives I'd stick to a little brasso. Sure you want your knife to look good in your collection but I don't think it hurts to have it still look like it seen a few years service; character and all that. :)
Neil
-
Good advice Neil. I've improved on my results by using a liquid stainless steel cleaner (intended for pots and pans) first, then going with the Brasso. It won't remove bigger scratches or dings but does give a good finish otherwise.
-
@NKB said:
I'll just add a word of caution on the little knives. There isn't much plastic over the toothpick / tweezer slot and if you are trying to rub out deep scratches you can crack the plastic there. If you have deep scratches on any SAK and are starting out with a coarse grit it is possible to wear the inlaid shield away. I've done it
On vintage knives I'd stick to a little brasso. Sure you want your knife to look good in your collection but I don't think it hurts to have it still look like it seen a few years service; character and all that. :)
Neil
Neil hits on a very good point there. Although it is nice to polish them up a little bit, I like SAK's and any other tools to show there wear marks. It's part of the tools history.
-
Will Brasso give a high enough polish for reflecto-porn photos? ::) :o :D
-
Thankfully the image would be slightly diffuse ::)
OK for reflecto soft porn I guess... no need to illustrate OK >:(
Neil
-
:ahhh
That's NOT how I want to find out what you all look like.
-
@NKB said:
I'll just add a word of caution on the little knives. There isn't much plastic over the toothpick / tweezer slot and if you are trying to rub out deep scratches you can crack the plastic there. If you have deep scratches on any SAK and are starting out with a coarse grit it is possible to wear the inlaid shield away. I've done it
On vintage knives I'd stick to a little brasso. Sure you want your knife to look good in your collection but I don't think it hurts to have it still look like it seen a few years service; character and all that. :)
Neil
I agree with Neil. I have yet to do any polishing on any of my really old vintage and collectible knives. I have been only polishing some good users or collectible models that are great for display or EDC. I have polished up a couple of 58mm's and must admit I have not had any problems other than they are too small to hold very well to do the job comfortably. I have only been starting at 1500 grit paper and that does not seem to bother the shields or the thin area above the inserts. Personally I am not planning on doing too many of the 58mm's since you can get replacement scales so cheap.
When it comes down to it the 20-30 minutes spent polishing a knife is probably not worth it in money terms since you can easily replace a new scale for around $7 or $8. I usually will polish a knife or 2 while watching a movie with the wife in front of the telly so its time not spent entirely on that process.
In my collection interests, I have a moderate collection of "Hoffritz" marked knives of Victorinox descent. The older ones always have a Hoffritz inlay on the front scale just like the shield. A couple of the oldest ones I wanted to save the front Hoffritz scale so I have polished up a couple of them. One in particular was a Fisherman type with the Fish and Hoffritz logo on a badly oxidized scale. I tossed out the back scale since it was not unique and polished the front one up. It turned out better than expected especially since it was heavily corroded. There are 2 small patches of "pock marks" that remain but they are very small and the rest of the scale is super shiny like new. I could have never replaced that scale so in cases like that I end up doing the polishing.
-
I use the Brasso wadding too , one tin lasts for years .
Stressmaster , thats some really good results ;) I reckon you could have a nice little side line going there .
Dunc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Please note the emphasis. We don't all share you particular fetish. ... some of us have much more interesting ones >:D ;)