New 2017 Leathermans
-
To do half tool, I wonder why LM did not use Wave/ Charge base with skeletonized frame of Skeletools. We would get two full-size blades (PE + SE, or PE + file), plus scissors and a bit driver. While at it, add a rechargeable flash light where the pliers' pivot is.
-
@Gareth said:
My my, aren't we all feeling very cynical? :DDo I wish LM had come up with the new wonder MT to beat them all? Yes, of course. I'd have been OK with a good upgrade to a existing tool as well.
That doesn't mean that I'm going to write off these knifes though. OK, the waiter tool I'm never going to buy and I can't see it being a success, but the B2 and Skeletool KB don't look too bad to me. As a couple of others have said they might be a good source of PE blades for the Skeletool fans. They certainly don't offend me in the same way as they seem to a lot of you chaps.

It is interesting the waiter tool is (UK legal) more expensive, getting stuffed on pricing again?
I'm ignoring the skeletool derivatives because they aren't legal here
-
I would consider half a Surge with 2 blades, awl, bit driver, prying tool. For less than half the price.
These
-
My my, aren't we all feeling very cynical? :D
Do I wish LM had come up with the new wonder MT to beat them all? Yes, of course. I'd have been OK with a good upgrade to a existing tool as well.
That doesn't mean that I'm going to write off these knifes though. OK, the waiter tool I'm never going to buy and I can't see it being a success, but the B2 and Skeletool KB don't look too bad to me. As a couple of others have said they might be a good source of PE blades for the Skeletool fans. They certainly don't offend me in the same way as they seem to a lot of you chaps.

It is interesting the waiter tool is (UK legal) more expensive, getting stuffed on pricing again?
I'm ignoring the skeletool derivatives because they are legal here
I think it's a case if the scissors being a premium (more time on the assembly line?). Vic does the same, Camper vs Climber and you're going to pay more for the Climber.
No, I'm not going to seriously think about the Skeletool KB either, partly as they're not reason-free EDC but also because I'm left handed and they're never going to suit. :D
I'm still a little surprised at the near universal reaction though. A USA made, mid grade steel, light weight, OHO pocket knife with a 25 year guarantee from a known maker for $25 or less. For those in the market I'm not seeing the downside.

-
I loved that PE skele. And with that price i might get that at some point. Good size blade with slim design. Most i loved the thing, that i could get replacement blade rather cheap for skeletool or freestyle. I just do not like half serrated blades. Sad, that it does not have bit driver.
-
There is a market for these tools imo simply because they have Leatherman on them. I don't think they will be poorly made, and they may see a decent increase in sales due to the price point. My biggest gripe is it really does seem like a lazy design. As others have said they have plenty of potential with their current lineup but instead of refining and perfecting (or even offering more variants) they just said hey let's cut the juice and skeletool in half and see what happens. If I recall correct they tried the same thing with the original style design...and it didn't go well. So all in all it's not so much of the tools themselves, but the apparent lack of effort from Leatherman
-
Meh.
-
@Demel said:
There is a market for these tools imo simply because they have Leatherman on them. I don't think they will be poorly made, and they may see a decent increase in sales due to the price point. My biggest gripe is it really does seem like a lazy design. As others have said they have plenty of potential with their current lineup but instead of refining and perfecting (or even offering more variants) they just said hey let's cut the juice and skeletool in half and see what happens. If I recall correct they tried the same thing with the original style design...and it didn't go well. So all in all it's not so much of the tools themselves, but the apparent lack of effort from LeathermanWell put.
-
I don't think anyone is suggesting that they will be poorly made- they are Leatherman, and so you can expect a certain level of build quality (the Rev being the exception to that rule) coming from in house manufacturing.
That having been said, I think the issue here is the let down- and it's bigger that we think.
Gerber came out with a new tool that was exciting. Whether you like the Center Drive or not, you have to admit that there was an awful big splash for a multitool, almost indeed as big as when the Tread was launched.
Then SOG announced a pile of new tools to fit almost every need, every size and every budget, and our excitement grew.
The multitool industry goes in cycles, and this is our upswing, and the first one we've had in years. I would say the last time the market suddenly surged forward like this was 2007-2009 when CRKT was putting out Zillas and Guppies and Lumabiners and Victorinox was riding high on the Spirit and Leatherman gave us the Skeletool and things were great.
But here we are, all fired up and ready to ride off to the stores and drop gobs of cash on new tools, and where is the most exciting, groundbreaking, industry leading multitool manufacturer?
Behind the outhouse, pants around their ankles, trying to sell us on broken bits of former glories.
It's not only somewhat disappointing for us, it has got to be downright embarrassing for Leatherman, the company that built this industry. What were they thinking, giving us a smurfing bracelet and then sitting around playing with their bottoms while the companies seen as copycats run rings around them.
Holy smurfing smurf.
I mean really.
Holy.
smurfing.
smurf.
Def
-
@Grant Lamontagne said:
I don't think anyone is suggesting that they will be poorly made- they are Leatherman, and so you can expect a certain level of build quality (the Rev being the exception to that rule) coming from in house manufacturing.That having been said, I think the issue here is the let down- and it's bigger that we think.
Gerber came out with a new tool that was exciting. Whether you like the Center Drive or not, you have to admit that there was an awful big splash for a multitool, almost indeed as big as when the Tread was launched.
Then SOG announced a pile of new tools to fit almost every need, every size and every budget, and our excitement grew.
The multitool industry goes in cycles, and this is our upswing, and the first one we've had in years. I would say the last time the market suddenly surged forward like this was 2007-2009 when CRKT was putting out Zillas and Guppies and Lumabiners and Victorinox was riding high on the Spirit and Leatherman gave us the Skeletool and things were great.
But here we are, all fired up and ready to ride off to the stores and drop gobs of cash on new tools, and where is the most exciting, groundbreaking, industry leading multitool manufacturer?
Behind the outhouse, pants around their ankles, trying to sell us on broken bits of former glories.
It's not only somewhat disappointing for us, it has got to be downright embarrassing for Leatherman, the company that built this industry. What were they thinking, giving us a smurfing bracelet and then sitting around playing with their bottoms while the companies seen as copycats run rings around them.
Holy smurfing smurf.
I mean really.
Holy.
smurfing.
smurf.
Def
So what your saying is your not happy :D :D
-
It's not me.... not specifically, and happiness isn't really a factor. I am just so disappointed in Leatherman, and I feel bad that they are completely missing the new wave of multitools.
I am disappointed that this seems to be the best of what they could come up with, and I feel bad watching Leatherman founder with absolutely nothing worth seeing.
These offerings aren't anything new, they aren't anything exciting, they aren't anything special, coming from a company that defined the whole market. They aren't just the trend setters, they were the market creators. And yes, I get that they can't hit gold every year, but there's got to be something they could have come up with to lead the charge, but there isn't even that.
I am hoping they have something worthwhile in the works that maybe just wasn't ready in time to take to SHOT. That's my hope, and if that's not the case, I hope they come up with something REAL fast and pretend that was the case.
Def
-
Hm.....nothing to see here

Not impressed by these offerings. I'm not exactly chomping at the bit for new MTs anymore, but I still like to see cool new options, or even revisions or new configurations for existing tools. Oh well, maybe later in the year, or next year

-
Well I can't really say I am totally impressed with the unexciting new tools. I believe in Leatherman and have trusted them for years. I hope that this was just a simple marketing plan as there was so much excitement around SOG and Gerber that Leatherman did not want to get lost in the shuffle and chose to stay quite about what is in the pipes. We do it all the time at my work as my industry is super competitive and innovative.
-
Is Leatherman expected to, or have they released something revolutionary each year? It'd be very cool to see a infographic timeline, anyone?

-
Welp. Here it is :D

-
The Leatherman Juice CS3 comes with a can opener, scissors, bottle opener, and corkscrew.
The Juice CS3 is a travel friendly utility tool that would make a great addition to any toiletry bag. Without an actual blade but plenty of exciting features, the Juice CS3 can make it through airport security no problem.Whatever made LM think that scissors are allowed through airport security?
Am I wrong?
Or are things different in the States?And why does their marketing guy call an LM product line/family - a franchise? ???
If it really is a franchise - What are they franchising and to whom? -
@Grant Lamontagne said:
Juice CS3?Hell, I got one of those way back in 2013! :ahhh
What can I say? Multitool.org is WAY ahead of the curve!

Def
My point Exactly!!! WE are the leaders here!!!
-
So, what was Leatherman's last real new MT? The Rebar?
No, the Signal. Or am I forgetting something?*I do understand everyone's disappointment, I really do. What we want is something new and exciting, but what we get is something that our members have been doing for years and not even the best versions of those ideas. What can be done with a half Sidekick/Wingman is just cool IMO.
*Really, am I forgetting something? I feel like I'm forgetting something.
-
Oh, and I feel like I've got to say this; for all you Leatherman fans that feel let down at the moment, why not try a Gerber, a SOG or a CRKT? If you don''t have one already why not try a Vic Spirit? They all do make some really good tools...it's just that not ALL the tools they make are great. :D Seriously though, try an MP400, I doubt you'll be disappointed.
-
They could've done better if they stole an idea off the forum

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



