Coloring SAK Scales
-
High temperature test... 85-90°C
The toothpick did take the color well (but not the tweezers, sorry they are not in the picture).
The scales got out of shape but did barely change color. I might try longer at lower temperature, but at that point, I'm not optimistic.I'm a big fan of that banana yellow scale
:D
It was supposed to be orange... but at least it is shaped like a banana too :D


-
What kind of dye were you using, Rit dye or similar? Rit works well on some plastics, nylon especially, but don't know about cellidor.
But finding that you can remove the paint from silvertech scales is a great discovery, even if that wasn't the original aim... many of the greatest scientific discoveries were made by accident :D What exactly was the process for that? Victorinox have released a bunch of limited editions with different paint colours on the back of clear scales (white Christmas, orange/green colour twins, and Olympic gold). It would be great to be able to make our own in any colour.
-
@shibafu said:
What kind of dye were you using, Rit dye or similar? Rit works well on some plastics, nylon especially, but don't know about cellidor.But finding that you can remove the paint from silvertech scales is a great discovery, even if that wasn't the original aim... many of the greatest scientific discoveries were made by accident :D What exactly was the process for that? Victorinox have released a bunch of limited editions with different paint colours on the back of clear scales (white Christmas, orange/green colour twins, and Olympic gold). It would be great to be able to make our own in any colour.
I used different dyes with different protocols. Commonly only the toothpick really did take the color well (I have now an orange and a black one).
Got a new batch of scales lined up and will try some more.
-
@Etherealicer said:
Silvertech scales after cleanup (picture with and without flash). As you can see it is almost completely clear with very little, light blue discoloration in some edges. Probably could clean those corners too.Very interesting!
How looks a SAK with perfectly clear scales?


-

I think the question SHIBAFU was really trying to ask regarding the dye used, and what I would also like to know:
What was the solvent for the dye that stripped the paint from the Silver-Tech to make them clear? Was it just a vinegar or something stronger?I ask because I have a set of Silver-Tech coming that I want to strip clear, then hydro swirl the inside surface in my wife's favorite colors so it shows through the scale.
I mentioned the project in another thread and was directed to your experiments. I was originally was going to use paint and Duracoat on a set of stock red scales, but seeing the possibility I jumped on it and ordered some Silver-Tech to play with instead.It will be interesting to see what you come up with next.

-
@Noa Isumi said:

I think the question SHIBAFU was really trying to ask regarding the dye used, and what I would also like to know:
What was the solvent for the dye that stripped the paint from the Silver-Tech to make them clear? Was it just a vinegar or something stronger?I ask because I have a set of Silver-Tech coming that I want to strip clear, then hydro swirl the inside surface in my wife's favorite colors so it shows through the scale.
I mentioned the project in another thread and was directed to your experiments. I was originally was going to use paint and Duracoat on a set of stock red scales, but seeing the possibility I jumped on it and ordered some Silver-Tech to play with instead.It will be interesting to see what you come up with next.

I got a new set too... didn't test it yet but my finger is on acid (vinegar).
-
That has been a fascinating experiment and I am loving the results so far. While they may not be perfect yet, it is a huge step forwards and I can see a lot of potential here.
Def
-
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.

-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.
Looking forward to the results

Be careful with organic solvents. The scale material is not very solvent-resistant, even with mild solvents like alcohol. That's why I was surprised by Etherealicer's discovery that you can remove the paint without damaging the plastic.
-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.

I'm a bit busy at the present so it is great to see, someone else picks up where I left.
-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.

I'm a bit busy at the present so it is great to see, someone else picks up where I left.
Addendum, if you have any place warmer, put it there. Assuming it is a purely chemical reaction then 10°C will increase reaction will double the speed.
If you can't see any result add a big spoon of table salt and give it some more time. -
It has been 5days +/- an hour or so
The results are underwhelming. There are visable signs of the coating getting thiner, although only a little bit of one edge has stripped completely.
This would indicate that temperature is a factor, and perhaps that the dye changed the ph of the vinegar to be more aggressive.Since I dont realy have some place warmer than a windowsill I will add some salt as suggested.
1tbs - 16oz vinegar



-
Well, it is a result, just not enough but it is the right path. Maybe the salt will help.
-
Since vinegar + salt have been taken care of I thought I try some other acids.
- Coke
- Lime juice
Time to wait...
-
Sorry I havent posted an update. It has been 7 days since I added the salt. When I added it and gave the jar a shake some more of the thinner bits on the ribs pealed off. I'm pretty sure that was just due to the agitation.
Today I remembered to look in on it and there is progress. The salt/vinegar mix does work cold if you have the time to wait. As stated before I keep my place is around 73f (22c) this time of year. Seems I am committed to following the cold slow road since I am really curious now just how long it will take.
It will be intresting to do another set in the summer when it is 90-100+F on my front porch and see how much quicker it goes.So here's some update pics. As you can see the cutout scale is clearing up much quicker and is completely clear in many places. The shield scale is thinning quite a bit and you can see light throughout large portions. When I started I had a feeling the coating was thicker on this one; seems I was right.
After taking these I mixed a fresh solution same as before, roughly 16oz vinegar/ 1Tbs salt.

-
@Noa Isumi said:
Sorry I havent posted an update. It has been 7 days since I added the salt. When I added it and gave the jar a shake some more of the thinner bits on the ribs pealed off. I'm pretty sure that was just due to the agitation.
Today I remembered to look in on it and there is progress. The salt/vinegar mix does work cold if you have the time to wait. As stated before I keep my place is around 73f (22c) this time of year. Seems I am committed to following the cold slow road since I am really curious now just how long it will take.
It will be intresting to do another set in the summer when it is 90-100+F on my front porch and see how much quicker it goes.So here's some update pics. As you can see the cutout scale is clearing up much quicker and is completely clear in many places. The shield scale is thinning quite a bit and you can see light throughout large portions. When I started I had a feeling the coating was thicker on this one; seems I was right.
After taking these I mixed a fresh solution same as before, roughly 16oz vinegar/ 1Tbs salt.Looks like it works, just a lot slower than expected, maybe a daily shake would speed things up.
Now I have to go home and look at mine :ahhh -
Just a quick update photo
I changed out the solution again this afternoon

-
@Noa Isumi said:
Just a quick update photo
I changed out the solution again this afternoonSo, it takes a lot longer BUT it seems to be working

-
@Noa Isumi said:
Just a quick update photo
I changed out the solution again this afternoonSo, it takes a lot longer BUT it seems to be working

It does indeed. They're looking good Noa.

-
I got side tracked and forgot to check the scales till last night. They have finished cleaning up and are completely clear as of some time in the last couple days. I will post a pic later tonight.
So that was about a month in vinegar and salt at a relatively cool temp with weekly solution change.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



