New 2017 Leathermans
-
I like the Juice B2 as a sort of modern traditional knife. And they brought back the full-sized Juice blades!

[quote author=Padre link=topic=70306.msg1414249#msg1414249 date=1484837911]
These are knives for people who arent interested of knives. Someone mentioned Ontario Rat 2, and these cannot compete with it quality wise, or any otherwise either.I have no doubt the RAT 2 will be a better value and higher quality, but it won't be as cheap ($28 on KnifeCenter right now vs. $25 MSRP for the LM) and I've never seen one in a physical store.
It's the one I'm most likely to buy, but I'd have to find it on a deal first. I'm sitting here trying to think of another non-OHO knife with a serrated blade.

Cold steel Lucky
I'd forgotten about that one.

[/quote]
I've also just remembered the Vic Bakers knife as well. -
@Gareth said:
Oh, and I feel like I've got to say this; for all you Leatherman fans that feel let down at the moment, why not try a Gerber, a SOG or a CRKT? If you don''t have one already why not try a Vic Spirit? They all do make some really good tools...it's just that not ALL the tools they make are great. :D Seriously though, try an MP400, I doubt you'll be disappointed.^^^ This!
A perfect time to broaden your horizons
-
@sLaughterMed said:
I almost feel like someone at Leatherman found a giant bin of the old Juice scales and blades, and aksed theengineeringMarketing department to find a way to get rid of them all.FTFY

-
I am still over here like
Why haven't they came out with something plier based ::) They should have redone the Wave/Charge series like they did with the Surge and made a Surge sized Charge or expended the Rebar line with different toolsets :ahhh Why do we have ideas here and they don't and they have people that get paid to come up with stuff 
Hoping that they are just late with a prototype tool and just didn't make it to SHOT but will be an early summer release :D
-
On another thought, people now can officially buy a Skele blade as spare. It is strange to call a folder as a tool in Skeletool. They are even lazy in naming

-
Skeletool KB vs Buck 484, 484 is superior in very way.
Blade length: KB 2.75" ; 484: 2.75"
Blade Steel: KB 420Hc ; 484: 420HC
Weight: KB 1.5oz ; 484: 15.oz
Warrenty: KB 25yrs ; 484: Forever
MSRP: KB $25 ; 484: $22
-
Or almost exactly the same. ;)
-
Been saying it for years. Praying it, really.
Tim needs to come out of retirement. With a vengeance. Bloody, brutal vengeance. Take his company back. Design, or ask designers how much money they want to save Leatherman.
-
I kind of like the Skele-knife. I think I'll get one. I wish it incorporated at least the driver and bit storage. I also wish, that instead of just different paint jobs, that they offered different blade options; the serrated sheepsfoot (with glass breaker!), 154cm plain edge, 420 combo, and maybe introduce a tanto.
The Juices are pretty disappointing IMHO. You know Leatherman have seen the amazing Single-wing Wingmen that have been so well documented here on MTO, they really, really, really should have given consumers a production version. That would blow these Juices away.
I am curious about the box-cutter tool, the timing that it showed up on Trademarkia is interesting. Basically right before SHOT. It seems like they would have wanted to either have it ready in time for SHOT 2017 or waited longer to file and have it ready for SHOT 2018.
-
-
The Juice knives would have been better had they incorporated other tools instead of just the blades
It really looks as though they had leftover parts from the old Juice line and just wanted to use them 
I would be up for a Juice knife with PE blade, diamond file, saw and scissors

-
Knife and diamond file would definitely be more interesting to me. :)
-
@Poncho65 said:
The Juice knives would have been better had they incorporated other tools instead of just the blades
It really looks as though they had leftover parts from the old Juice line and just wanted to use them 
I would be up for a Juice knife with PE blade, diamond file, saw and scissors

Yes, a KF4 with scissors in place of one of the blades, or even the woodsaw in my case as I have rarely used one.
Sent from my SM-G920R4 using Tapatalk
-
@pietervn said:
Another "Second" for LM? These 1/2 tools have been made here for a while now, mostly with a better tool layout. I wonder if they had excess parts lying around?Pete
THIS ^^^
SIGH.
LM all you have to do is ask one of OUR modders to come up with tools for you
.UPDATE the WAVE. R&D a Surge blade exchanger to fit the Wave and add the Rebar Plier head while you are at it. Ditch the Serrated blade and add OHO scissors at the same time omit the small scissor and add an AWL. Ditch the small bit driver an maybe add a Chisel?
Maybe off some other tool in BO? I'd love to see the Crunch in BO. Maybe offer the Crunch in a A100 configuration? LM pruners? Maybe re-design the Juice and offer it in BO? I don't know I'm just spitballing here.
-
I almost feel like someone at Leatherman found a giant bin of the old Juice scales and blades, and aksed the
engineeringMarketing department to find a way to get rid of them all.FTFY


-
Another "Second" for LM? These 1/2 tools have been made here for a while now, mostly with a better tool layout. I wonder if they had excess parts lying around?
Pete
THIS ^^^
SIGH.
LM all you have to do is ask one of OUR modders to come up with tools for you
.UPDATE the WAVE. R&D a Surge blade exchanger to fit the Wave and add the Rebar Plier head while you are at it. Ditch the Serrated blade and add OHO scissors at the same time omit the small scissor and add an AWL. Ditch the small bit driver an maybe add a Chisel?
Maybe off some other tool in BO? I'd love to see the Crunch in BO. Maybe offer the Crunch in a A100 configuration? LM pruners? Maybe re-design the Juice and offer it in BO? I don't know I'm just spitballing here.
Chisel , can/Bottle/Packed Opener , and Hex bits

-
I know the folks at LM are probably some of the brightest and most well educated. Why not for the sake of WTF hire someone just for the sake of WTF and see what they can come up with?
I'm pretty sure Metro or Evil would be stoked ( maybe not
) to swing by and draw something up.Maybe hire a Multitool Forum Owner
as a consultant? Think outside at the same time inside the box.A team of MTO LM modders and thinkers let loose at LM :ahhh just to see what they can come up with.
Anyone in?
-
Another "Second" for LM? These 1/2 tools have been made here for a while now, mostly with a better tool layout. I wonder if they had excess parts lying around?
Pete
THIS ^^^
SIGH.
LM all you have to do is ask one of OUR modders to come up with tools for you
.UPDATE the WAVE. R&D a Surge blade exchanger to fit the Wave and add the Rebar Plier head while you are at it. Ditch the Serrated blade and add OHO scissors at the same time omit the small scissor and add an AWL. Ditch the small bit driver an maybe add a Chisel?
Maybe off some other tool in BO? I'd love to see the Crunch in BO. Maybe offer the Crunch in a A100 configuration? LM pruners? Maybe re-design the Juice and offer it in BO? I don't know I'm just spitballing here.
Chisel , can/Bottle/Packed Opener , and Hex bits
Hire this Man while you can LM

-
Another "Second" for LM? These 1/2 tools have been made here for a while now, mostly with a better tool layout. I wonder if they had excess parts lying around?
Pete
THIS ^^^
SIGH.
LM all you have to do is ask one of OUR modders to come up with tools for you
.UPDATE the WAVE. R&D a Surge blade exchanger to fit the Wave and add the Rebar Plier head while you are at it. Ditch the Serrated blade and add OHO scissors at the same time omit the small scissor and add an AWL. Ditch the small bit driver an maybe add a Chisel?
Maybe off some other tool in BO? I'd love to see the Crunch in BO. Maybe offer the Crunch in a A100 configuration? LM pruners? Maybe re-design the Juice and offer it in BO? I don't know I'm just spitballing here.
Chisel , can/Bottle/Packed Opener , and Hex bits
Hire this Man while you can LM

No No , Im not worthy , A friend take all credit on this one...
-
As to the knife situation, and yes there is a situation. I believe I've said it before, why not partner with knife makers? Kershaw and fricken everybody seems to be a win for many knife lovers.
LM why not partner with a bush crafter and come out with bushcraft fixed blade? Maybe they missed the boat but IMO bush craft blades are still and will always be a thing.
Now maybe I'm silly but what about taking the Signal and tweaking it a bit? Maybe a scandi blade? Maybe something like what DiResta did with the MUT? I think that would be awesome for a "outdoor" option on the Signal.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



