Show off your Sak mod's!
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :) -
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
Those are what Syph007 uses, I think he mentioned his secret in And so it begins.... (My adventures into Alox!). They are not necessarily any easier than pins however, at least not if you're modding for your own use, since it requires drilling out the rather hard tools to make them fit. I believe they are 1/8" instead of the standard 2.2 & 2.5 mm but I'm not certain.
Oh, drilling out the tools? I don't want to do that ... :o
Thanks for your answer! :)If you can source the pinstock or if you are only planning on removing layers the actual work is not that difficult (although it's preferable to work with Cellidor since that hides any imperfections).
-
@Monrogue said:
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
What screws are that, pls? I'd like to do some modding of my own and using screws seems to be much easier than the pins ... :)
I think T6 torx

Sent from my SM-G920R4 using Tapatalk
-
For some time I wanted a Compact pattern in 84mm.
I started this mod with 84mm Waiter, 91mm scissors with parcel hook (the parcel hook was already modded to pry bar) and aluminum plate from ancient hard drive ;)



-
The hard part is to drill in victorinox steel… I give up the idea to make a new hole in the scissors and just enlarge all holes to 3mm (destroying cobalt drill bit in the process ).
Whit the new scales I assembled back the Water and started the scissors spring mod



-
When I finish to balance the spring tension I will put the permanent bolts (they will be aligned
With the scales) and a cross on the scales :D


-
Nice job, Timganev. That is a novel source of scale/liner material.
-
Awesome mod Timganev...

-
Nice one Timganev!
-
Excellent mod timganev! I like your innovative thinking.

-
A good friend bought a 2nd hand Compact and asked the seller to ship it straight to me for some mod...
A simple hack to morph it into a Trail Guide with a fine screw driver on the back of the metal file. This is actually my first mod for 2017.

It is now on its way to my friend to serve edc duties.

Sent from my iPhone using Tapatalk
-
Another fatman I maded:
https://www.youtube.com/watch?v=u0I80kX9oF8 -
@Ronald Schröder said:
I like what you did there! I also have a question about the fork. The answer may be in the video but my PC doesn't have sound, so: Is that a Mikov fork? And what kind of spring is it on? Do you think it could be fitted in a 84 mm knife?Yes, it is Mikov, spring is from Victorinox, I don't remember from which tool (yes, I have big mess in my pocket knife parts) :-)
84 mm: maybe with huge regrind, and drilling hole for pin in completely different place, bcs this fork is quite big.
If you live in Germany / Austria, maybe you can find polish knife Gerlach with fork, it's lot closer to 84 mm size.
Or maybe form from Richartz, but I'm not so sure... -
The new apology join. regular discussions on local forums.

SAK,My first modding is compact tinker with ecoline acale,I chose it because it was quite nice with minor scratches
[emoji482]
-
-
@fong said:
The new apology join. regular discussions on local forums.
SAK,My first modding is compact tinker with ecoline acale,I chose it because it was quite nice with minor scratches
[emoji482]
Welcome to the forums Fong... So, what do you call a Yeoman with WS+MS?

Sent from my iPhone using Tapatalk
-
Nice and welcome fong

JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login