A call to all those interested in sending Leatherman a message.
-
They should put replaceable cutters on the Crunch!
-
I agree with this idea.
if there is a hidden forum, I want in

I don't have much to contribute, but as always I love to see what people have come up with.
+1!!! I dont have much free time at all or much equipment but I'd love to see ideas and maybe make humble suggestions if thats allowed! :D
-
Great idea. Are we building off of an existing chassis or a complete redesign?
Sent from my XT1563 using Tapatalk
-
They've been ripping off our ideas for years, now we're considering putting in all the design work for them to get all the profit?
Why Leatherman anyway, why not another company?
Many people would agree with me when I say that some of their designs are only let down by how shabbily they build them, and I wouldn’t take much refining (from the right people) to greatly improve them.
So.......
Why us? What's in it for MT.O? Are we prepared to get our ideas stolen when the big reveal happens, or someone sneaks in through the net?
Why them? Why should only this one company profit from our efforts? Why "donate" all our collective wisdom to one commercial entity?
Why bother? Can they meet OUR quality standards? Do we really think they'll honour the fact that it's our intellectual property?
I'm not wanting to piss on the bonfire, just avoid major upset and disappointment later. If you are all satisfied with the answers to these questions (whatever they may be), then I genuinely wish you all the very best of luck and enjoyment.
I think I'll keep out of it, unless MT.O is guaranteed some form of protection and definitive "reward" by whichever company is due to benefit from this, before the project gets underway (based on lessons I learned the hard way)Good luck everyone

-
50ft does make some pretty valid points there.. i know i wouldnt want mto or any members cheated out of anything
-
Why us?
We have some very creative and knowledgeable people here. I for one am tired of them dictating to us what we want. We have seen some pretty awesome mods done here. I think many people come to MTO to learn from us. Why not us?
Why them?
Would I be wrong in saying LM tools are in more hands than the others? It doesn't have to be just them. I only picked them because in all honesty I pretty much only have LM tools and quite frankly I didn't think the Spirit needed much improvement.
Why bother?
I am not one to complain and be content. IMO we have relevant ideas and we bring a lot ( collectively ) to the table. We all want the same thing right? We want better tools and we want tools that are more refined. We spend a lot of time discussing tools and evaluating them. We have such opinionated views of every tool that hits the market. We have members who have years of experience and so why not take that huge perspective and see if we can effect change.
Why not bother?Now as far as disappointment or whatever else I hope everyone can keep things into perspective. Is LM going to change the way they do business because a few yahoos say so? Has anyone ever heard of a group of like minded individuals taking it upon themselves to help improve a brand?
To you 50ft, I value your view points and really enjoy reading what you post. Your insights are well regarded and respected. We may not agree on everything however I can always find some common ground with you. I think you would bring a lot to the "table". Lets see how it starts and then decide if you don't want part.
Lastly let me leave you with a quote from Theodor Roosevelt,
It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.
-
I have never much cared for secret societies, or secret forums. I have always felt that inclusivity, and not exclusivity, is essential to the well being of any forum. I am a little perturbed by the notions of this thread to be frank.
And in case 50ft-trad feels like he is in the minority, I can only say my thoughts are very much in line with his.
Alas, I am but one voice...and having said as much, I shall not participate in this any further.

-
This all sounds fun and all, however a tool that appeals to 20 of us here may not be the tool that appeals to the masses and makes money for a company like LM.
-
I take on board what Chako and 50 ft-trad have said above. But I have seen this sort of thing working on watch forums where people vote on the features like dial colour, markings, hand size etc. There is usually a minimum order and people pay in at the start after a company has been approached to make the watch. Some work out and some don't.
Maybe the way to go is use an existing base design eg wave or mut or someone else's standard tool and we get to decide to customize what tools we want?
Or perhaps as someone suggested a tool for mechanics or electricians, what about a MT with 2(?) main standard tools and then optional extras for particular trades?
-
I mostly agree with 50ft and Chako. Surely we're not here to replace the Leatherman R&D department? There must be better ways to get across to the producers than a hidden group designing the entire tool. Never mind that most don't have enough knowledge of production design to make anything that would be feasible to produce.
How about contacting the big producers and ask how they would like to receive comments and critique? Maybe a single, more strictly moderated, topic for each producer would mean that the, for the producers, relevant comments wont get swamped in the, even more important for us users, banter? Maybe setting up a group of people who could relay the gist of our impressions to the relevant companies, MT.O ambassadors basically. The three big American brands seem to be quite open to this type of communication. Maybe some other way altogether.
-
I agree with this idea.
if there is a hidden forum, I want in

Me too

Yay! Hidden forum? Count me in too!
What's it for again?

I believe the idea is for it to be hidden from lurkers, anyone on the forum who wants to be a part of the discussion would be welcome.
-
I agree with this idea.
if there is a hidden forum, I want in

Me too

Yay! Hidden forum? Count me in too!
What's it for again?

I believe the idea is for it to be hidden from lurkers, anyone on the forum who wants to be a part of the discussion would be welcome.
^^^ This in a nutshell.
-
Pretty much this
/topic/70370
-
@Aloha007 said:
Hello fellow MTO members. If you like me love Leatherman and want to see new and exciting multitools enter the market place then lets make it happen ourselves. Lets send Leatherman a message that we drive the market and we want them to step up their game. Tim we'll make you proud if you allow us an opportunity. What do you say MTO?We already spend a great deal of time talking MTs as our hobby. There have been some amazing creations here on MTO. We have some very talented designers, thinkers, hobbyists, tinkers, modders, and every other kind of person that if united could change the game.
**Lets choose a tool(s) to "re-design" and design internal implements that are missing from our beloved Leathermans and make it happen.
These designs/prototypes will be sent to Leatherman for consideration of production. There are some smart people here that can work out the details on how MTO will be compensated.**
Lets make this happen, tho lets make sure to keep this within the MTO family maybe via PM or other means until we are are ready to send to Leatherman.
Anyone want to change the game?
I'm confused by the confusion
. Secret society? Where did I say that? Chako please don't let a few excited posters skew the premise of what I was thinking out loud.The premise is really quite simple. Actually we are already doing it. Metro took a blade exchanger and put it in a Charge. Breezy did it with a Wave. Evil has turned a Skeletool into an amazing creation. Texas Tools if I am correct started out plating LM tools prior to offering modded ones. Please correct me if I am wrong. The ReCharge they offer has been done here ( not sure if it was done here first ).
There are those like Metro and Evil who have already been doing all this. Yes they do it in the open and answer questions to help others achieve the same. Rebar plier head in Wave for example. This is not a game changer and not everyone wants it but for those that do...... Awl on Wave, again not a game changer in any way but many want it. Maybe we can offer LM some more great ideas. We certainly do it and will do it anyway so why not actually send a modded tool to them. Why not send modded parts. I personally loved Toftys part Taxidad has ( sorry I forget what its called). Why couldn't LM produce that part for him example and make it available? I don't know all the answers which is why I posted the post.
I spend a lot of time on the Mod boards. Those that also spend time on those boards collectively have a lot of great ideas. Either due to lack of skills or workshop they aren't able to produce anything. Have we not seen some pretty fun ideas coming out of MTO? There are those that many of us couldn't produce regardless if we had the tools to do so.
Syph007 is doing what Victorinox wont. He made himself a nice business and has turned out some outstanding tools. By the way Syph007
. Pioneer X was in the "marketplace" for how long before Vics?Someone tell me the new offerings from Leatherman **aren't ** interestingly similar to what has already been done, idea wise at least.
Replace the R&D? Never said by me.
The market in some cases drives the products. Case in point, Signal. Bladeless Rebar. Tread
JOKES people :D.As far as secret societies. I have never said anything of the sort. I never even hinted as such. I said lets discuss vis PM only due to being able to come up with ideas and a "re-designed" tool ready for LM.
Sorry if anyone has misinterpreted the premise. I hope this offers some clarification.
-
@Fortytwo said:
I mostly agree with 50ft and Chako. Surely we're not here to replace the Leatherman R&D department? There must be better ways to get across to the producers than a hidden group designing the entire tool. Never mind that most don't have enough knowledge of production design to make anything that would be feasible to produce.How about contacting the big producers and ask how they would like to receive comments and critique? Maybe a single, more strictly moderated, topic for each producer would mean that the, for the producers, relevant comments wont get swamped in the, even more important for us users, banter? Maybe setting up a group of people who could relay the gist of our impressions to the relevant companies, MT.O ambassadors basically. The three big American brands seem to be quite open to this type of communication. Maybe some other way altogether.
Wonderful. Lets not ask, lets produce a specimen for their consideration. Surely they have seen some of MTOs modded tools. Why some ideas are picked up and other not, I wish I knew.
-
We have some very creative and knowledgeable people here. I for one am tired of them dictating to us what we want. We have seen some pretty awesome mods done here. I think many people come to MTO to learn from us. Why not us?
Why them?
Would I be wrong in saying LM tools are in more hands than the others? It doesn't have to be just them. I only picked them because in all honesty I pretty much only have LM tools and quite frankly I didn't think the Spirit needed much improvement.
Why bother?
I am not one to complain and be content. IMO we have relevant ideas and we bring a lot ( collectively ) to the table. We all want the same thing right? We want better tools and we want tools that are more refined. We spend a lot of time discussing tools and evaluating them. We have such opinionated views of every tool that hits the market. We have members who have years of experience and so why not take that huge perspective and see if we can effect change.
Why not bother?Now as far as disappointment or whatever else I hope everyone can keep things into perspective. Is LM going to change the way they do business because a few yahoos say so? Has anyone ever heard of a group of like minded individuals taking it upon themselves to help improve a brand?
To you 50ft, I value your view points and really enjoy reading what you post. Your insights are well regarded and respected. We may not agree on everything however I can always find some common ground with you. I think you would bring a lot to the "table". Lets see how it starts and then decide if you don't want part.
Lastly let me leave you with a quote from Theodor Roosevelt,
It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.

I think I understand your perspective, though I still feel a little confused as to the objectives and benefits. Are we trying to get the manufacturers to improve designs or manufacturing quality? In other words nudge them towards fixing themselves. Or are we trying to come up with a MT.O design, acknowledging that it may not be commercially viable to a wider audience on a mass production basis?
Who benefits? Is this just for the thrill of the chase, or do we want to achieve an in-hand tool at the end of this? Who owns it? Who picks up tooling costs and commercial risk? What does MT.O and it's members actually gain for this, aside from a "bit of fun".
If this is just a bit of fun, and a nudge to the manufacturers in terms of design criteria rather than a rigid design, how about taking one tool from a number of manufacturers - ideally tools that we have a shared negativity about, and exploring what design changes would take this from an unpopular tool, and turn it into a popular one. This may be helpful to more than one manufacturer, and also doesn't tie us down to one toolset which we can't even agree on ourselves. In effect, we'd be establishing a range of design tickboxes, or sub-criteria that should be factored in.
To agree on the solution, we must first agree on the problem that we are trying to overcome
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
