Leatherman SHOT 2018
-
ST300, made with a similar tool selection to Gerber's Pro Scout. Ditch the saw (since you'll have the EOD model's blade exchanger) and one of the blades for scissors and blade exchanger.
Wave, upgraded to have the Rebar's pliers and one of the tools ditched for awl. I'd also like to see the bit drivers ditched for the fixed drivers like the old one did.
Thinned down Rebar to become a revived PST and PST II.
Another Mini Tool, based on a shortened Rebar frame. I love the tiny blade, but I'd like to see a flat screwdriver on the end of the file that can fit No. 2 Phillips, my one and only complaint about the Mini Tool, the best LM in my opinion as it's the only mini multitool that is very much full sized.
Oh, and can we see return of the tiny flat screwdriver? That seems to be a tool that died out after '04, but is the tool I use most on my PST II.
-
Since we are dreaming up a solution for the lack of innovation from leatherman lately. I would totally go for a mini tool II with rebar head, large bit holder opposite small bit holder, box opener opposite a small plain edge, with classic bottle opener and can opener from original version. Think how great that would team up with any SAK. Also like the idea for a premium version of the surge with titanium handles, adjustable slip joint plier, premium blade (154CM, S30V, or why not even S30VN), exchangeable alternate blade (similar to havalon evolve) instead of a serrated blade, incorporated ratchet for 1/4" bits or LM propriatary even if it prevents putting a few too many flathead blades on the tool. Anyway just rattling, but I hope we do see something from them by the blade show this June.
-
Well, I guess you guys told me. Never mind.
But I will say that Signal is a piece of crap. I've handled them a few times, the ergos suck.
-
@chrono said:
Uhm... don't think you can bring scissors on airplaine...That's what I thought too. Personally, I'd never buy a "flying friendly" tool, because the TSA can take whatever they want anyway, so why risk it? I don't have any statistics to back up my paranoia though, so maybe those things really do get through security.
-
@ironraven said:
Well, I guess you guys told me. Never mind.But I will say that Signal is a piece of crap. I've handled them a few times, the ergos suck.
Therein lies the problem, everybody has an opinion. I find the Signal far more comfortable than other LMs (except for the Charge), might be hand size, might be the way I use it.
If you take away the plastic parts, then it is actually quite brilliant and I certainly think it is the next step from the Wave. I would also not be surprised if the next gen Wave would be based on the Signal.
-
@ironraven said:
Well, I guess you guys told me. Never mind.But I will say that Signal is a piece of crap. I've handled them a few times, the ergos suck.
I didn't want you told, I wanted Leatherman told :D

-
I have to defend the Signal too. I have used it as an EDC for more than three months. I find it is a good tool for MY EDC needs. YES, it has some plastic bits and they are gimmicky, but the tool itself is good. As Etherealicer, I find it very comfortable and it surprised me in the first challenge I did in November. It is not perfect, but it also does not deserve the bad rap it got here. One thing I would like LM to offer us is another choice of blade. As with the Skeletool range that has a PE and a Combo blade. It would be nice to choose between a PE or combo blade. The Damascus one from TTC is not bad either, but not a cheap option.
Cheers,
Pete
-
@ironraven said:
Well, I guess you guys told me. Never mind.But I will say that Signal is a piece of crap. I've handled them a few times, the ergos suck.
Yup it is a pos, I gave it away.
-
Build a Wave 2018.
Remove that silly eyeglass screwdriver and use the slot for an awl from the rebar series.
For those who cant live without it make a bit that fits the other bits and has those two tiny screwdrivers.
Always annoyed when I see this wasted slot on my Blast which would make an awesome tool otherwise.To the suggestions about slim tools:
Bring the PST Series back up. With improved ergonomics and the slim profile and the slightly smaller pliers than the Rebar/Wave Series . Maybe the plierhead of the Skelettool/Juices? Would be plenty for the job. And dont forget to add a removable pocket clip.And a final request:
Fire the dude that introduced all those loose fitting leather sheaths of the never tools. Not talking about the Molle-Sheaths but the ones coming with the regular STs. They are items that find their way right into my garbage tin. -
Wave/Charge mini bit holder. IMO either offer other pieces that will fit in it or bump it. Good idea but very limited in actual use. I agree with Shuya in LM could offer a bit for their standard bit holder offering eyeglass function.
OHO scissors. I love serrated blades however larger scissor would really be welcomed. However adding the Saw to the File slot would also work. We've seen someone add the saw to the file layer in a Charge recently. In this configuration the serrated blade with gut hook for those who love that combo can stay.
Loosing the min driver and scissors opens space for a chisel/awl/stout flat driver-pry tool.
Add Blade Exchanger to the Wave/Charge series.
-
Blunt Pliers
Simple isn't it?
Just Blunt Pliers without the stupid interchangeable carbide cutters - I've been trying to think of a pair of real pliers that use carbide inserts?
Blunt pliers and if possible standard fold out box cutter layer.
How taxing would that be.
Imagine it, a multitool where all you need do is discard the dull blade and insert a new one
Such joy

-
@tosh said:
Blunt Pliers
Simple isn't it?
Just Blunt Pliers without the stupid interchangeable carbide cutters - I've been trying to think of a pair of real pliers that use carbide inserts?
Blunt pliers and if possible standard fold out box cutter layer.
How taxing would that be.
Imagine it, a multitool where all you need do is discard the dull blade and insert a new one
Such joy

Making blunt pliers is really not that hard... why not mod one? Btw, Wave pliers don't have carbide inserts.
Standard box cutters are probably too large but like the Havalon a scalpel holder should work. -
Blunt Pliers
Simple isn't it?
Just Blunt Pliers without the stupid interchangeable carbide cutters - I've been trying to think of a pair of real pliers that use carbide inserts?
Blunt pliers and if possible standard fold out box cutter layer.
How taxing would that be.
Imagine it, a multitool where all you need do is discard the dull blade and insert a new one
Such joy

Making blunt pliers is really not that hard... why not mod one? Btw, Wave pliers don't have carbide inserts.
Standard box cutters are probably too large but like the Havalon a scalpel holder should work.Why don't I mod one?
"Why should I" is my first response, I don't mean that to sound as abrupt as it reads - sorry
Also, I've seen plenty of pictures of needle nose pliers with their ends cut off, yes... It gets rid of the pointy bit, but they are not blunt nose pliers.
Proper blunt pliers have broad flat surfaces at the tip to grab and hold, whereas the mods (usually in what I have seen) have little or no broad flat areas... They just have stumped snouts before the hole in the plier head.Yes, as a last resort it might work. But the wave retails here in the UK around £100 I can buy a cheap but half decent set of pliers for £10.
I'll be honest I'm sick of bringing this topic up and I'm pretty certain members are sick of reading it.
Which coincidently explains perfectly why I have little or no desire to purchase ANY new MT at present. The design and configuration are banal and stale. There is nothing to gain over a 2nd hand 20yr old bargain off eBay.
That's the bottom line and that's exactly the point that manufacturers are missing or more than likely turning a blind eye too.
-
umm
SHOT show LM booth in 2018

Perhaps the other half of the skeletool that was left out this year

LM, don't change a thing, we love you just the way you are...going
-
Boy, what a topic!
I started with a Wave in 2004, never carried because I did not need that selection of gadgets at the time, then was afraid I would loose it when career changed so used a Paratool.
Then I snagged a SuperTool 300 at half off and took a 30 day challenge here and found it very handy, but heavy for EDC.
Next, a Rebar, took another challenge and STILL love it. Found a [emoji521] Orange Wave at Cabelas, on sale, it travels with me but it is not my Rebar. Skeletool for Christmas, I have learned it has its good sides and carries well in my inside vest pocket of Carhart work jacket.
I have another handful of other LM tools but these are my go to tools.I really do not believe there ever will be a PERFECT MT that will make the majority happy, just one to BUY to say you got the latest and greatest.
I think LM wasted space at SHOT Show the last couple years, and well in 2018. Instead of spending money there, lower prices and get the quality above those other MT makers.
PS: there are some great mods owned by members here, selecting three or four as suggestions may not hurt for future ideas, but I can not hold my breath that long. [emoji12]
Sent from my iPhone using Tapatalk
-
Any news as to what is going to appear this year??
-
@Outback in Idaho said:
Any news as to what is going to appear this year??Half a Wave?
-
@Outback in Idaho said:
Any news as to what is going to appear this year??
Half a Wave?
The Splash?
-
@tosh said:
Blunt Pliers
Simple isn't it?
Just Blunt Pliers without the stupid interchangeable carbide cutters - I've been trying to think of a pair of real pliers that use carbide inserts?
Blunt pliers and if possible standard fold out box cutter layer.
How taxing would that be.
Imagine it, a multitool where all you need do is discard the dull blade and insert a new one
Such joy

Their are some very high end pliers for salsmurfer fishing that use braised in carbide cutters .They get used a lot for Kevlar , Spectra ,and Stainless steel leader material .
I had apair back inthe day , when I did salt water fly fishing
Chris
-
Anyone remember the Fuse and Kick? seems we want to re introduce what was already out there, a kick 2 would be sweet with locking blades. And yes a wave 3 with an awl, and make a mini hole in the base of the bit driver slot to hold the 1/4 inch as well as the mini driver. just drill a small hole or give the user a removable plastic insert that takes the mini. Also make a juice E model, give it the wire strippers and longer phillips and flat blades, keep the scissors, loose the can opener, or just install a bit driver slot and use the remaining space for a awl.
Signal is really a skeletool on steroids so make it a plain blade and instead of the saw make it a fully serrated blade. use a micra for the scissors and your well off??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
