A call to all those interested in sending Leatherman a message.
-
I have an idea inspired on the Tread.
Cheap.
Versatile
TSA complaint
Wereable
Low TechBut I don´t have the skills to get it real.
-
I don't know how much good a letter will do, but I'd be curious to see their profit/earnings.
Maybe they're still doing just fine with Wave and other popular tool sales... If they are in fact taking a smurf in the pocket book then that's an easy fix. As I said in a related thread: get some better designers on the payroll.
-
@sawman said:
I don't know how much good a letter will do, but I'd be curious to see their profit/earnings.Maybe they're still doing just fine with Wave and other popular tool sales... If they are in fact taking a smurf in the pocket book then that's an easy fix. As I said in a related thread: **get some better designers on the payroll.
**I don't know, those designers seem to be making a pretty good job. We might not like it but their recent offerings seem to be doing well.
The Wave is still the king and as long as it sells well, there is no reason for an upgrade/change. I mean the longer an MT is in production, the more profitable it gets.
Thread: Probably quite easy to manufacture, yet sells at a premium price. Added benefit is that there are probably far less warranty claims.
Skeletool KB/KBx: Think about it, its another product that does not compete with the current line-up and that is super easy for them to manufacture. Personally, I like the PE Skele blade and that it is soo light-weight. Probably going to get one. At any rate, it is most likely going to be profitable for LM, particularly because there was only a small initial investment required.
Signal: Like the Thread another stroke of genius. By changing the customer base they are able to sell the Signal at a higher price than the Wave (and I seriously doubt it is more expensive in manufacturing than the Wave).
Leap: Well, it sells better than the Micra/Charge/Rebar... Again, a tool that has a very strong customer base and probably does not take away from their other offerings.See, the great thing about this line-up is, that it hardly competes with the Wave. I mean at the end of the day, most people buy either a Wave or a Rebar, either a Wave or a Surge. So, I think the design team did a good job, expanding the product line without generating competition for themselves. And while that might not be what we as enthusiasts desire, it is the logical thing for a company to do.
-
Bit exchanger and t-shank file/saw tool on the knifeless rebar. In fact, put them on all plier based tools big enough to house them as standard.
Surge - bin the flat blades and replace with a decent pry-bar/nail puller.
All the larger plier based tools should have the replaceable cutter plier heads on them from the factory.
-
I don't know how much good a letter will do, but I'd be curious to see their profit/earnings.
Maybe they're still doing just fine with Wave and other popular tool sales... If they are in fact taking a smurf in the pocket book then that's an easy fix. As I said in a related thread: **get some better designers on the payroll.
**I don't know, those designers seem to be making a pretty good job. We might not like it but their recent offerings seem to be doing well.
The Wave is still the king and as long as it sells well, there is no reason for an upgrade/change. I mean the longer an MT is in production, the more profitable it gets.
Thread: Probably quite easy to manufacture, yet sells at a premium price. Added benefit is that there are probably far less warranty claims.
Skeletool KB/KBx: Think about it, its another product that does not compete with the current line-up and that is super easy for them to manufacture. Personally, I like the PE Skele blade and that it is soo light-weight. Probably going to get one. At any rate, it is most likely going to be profitable for LM, particularly because there was only a small initial investment required.
Signal: Like the Thread another stroke of genius. By changing the customer base they are able to sell the Signal at a higher price than the Wave (and I seriously doubt it is more expensive in manufacturing than the Wave).
Leap: Well, it sells better than the Micra/Charge/Rebar... Again, a tool that has a very strong customer base and probably does not take away from their other offerings.See, the great thing about this line-up is, that it hardly competes with the Wave. I mean at the end of the day, most people buy either a Wave or a Rebar, either a Wave or a Surge. So, I think the design team did a good job, expanding the product line without generating competition for themselves. And while that might not be what we as enthusiasts desire, it is the logical thing for a company to do.
I'm beginning to sadly see why it is that we as MT enthusiasts are in such a minority. I do agree the Wave is their money maker. Why fool with it? Dipping their toe into other areas without taking away from the Wave is good business.
I might be much to optimistic to think they ( LM ) listens. When I think about companies like Condor for example who listens ( I do understand making a knife is a different animal ) I felt/feel LM would also listen.
So my message to Leatherman is simple,
Up your quality control so we don't have to field questions regarding issues that shouldn't be for the top dog.
-
Pliers. All pliers. Offer a full and unimpeded main gripping area. If replacable cutters are used, make sure the cutting geometry is appropriate. Keep handle splay and ergonomic hot spots to a minimum, and let a range of hand sizes be used in testing this. These simple design aspects, and failure to recognise and follow them, are the main culprits which prevent Leatherman tools appealing to me. Fix those, and I would view the Rebar, Signal, ST300, and Surge far more favourably
-
@SteveC said:
I'b be more than happy with a mini Surge, how hard can that be LeathermanThat's what I thought of. A Surge TTi, in the Charge chassis but with big scissors, blade exchanger and awl. Keep the Charge TTi blades. Voilà!
On the other hand, I'm not sure I would use that instead of the Spirit.
So I might ask for:
- Tighter tolerances.
- Shinny brushed steel.
- No rust please. No rust, you hear me?
- Musical opening and closing.
- Springs! Individual and precise.
- Rounded edges, for us that work mainly with our mind and our hands are better suited to women caressing than rope climbing.
- Can you make it slim and slender? (That's a difficult one).
- Add some kind of a ratchet.
- Ask a reasonable price for it. By reasonable I mean less than 1/2 of what you are thinking (as your greatest antagonist does).
- Finally, make it yodel, if you know what I mean.

Then I would (maybe) EDC it.
-
I'b be more than happy with a mini Surge, how hard can that be Leatherman
That's what I thought of. A Surge TTi, in the Charge chassis but with big scissors, blade exchanger and awl. Keep the Charge TTi blades. Voilà!
On the other hand, I'm not sure I would use that instead of the Spirit.
So I might ask for:
- Tighter tolerances.
- Shinny brushed steel.
- No rust please. No rust, you hear me?
- Musical opening and closing.
- Springs! Individual and precise.
- Rounded edges, for us that work mainly with our mind and our hands are better suited to women caressing than rope climbing.
- Can you make it slim and slender? (That's a difficult one).
- Add some kind of a ratchet.
- Ask a reasonable price for it. By reasonable I mean less than 1/2 of what you are thinking (as your greatest antagonist does).
- Finally, make it yodel, if you know what I mean.
Then I would (maybe) EDC it.

-
Dear Leatherman,
Thank you for your multitools.-kaput
-
Dear Leatherman,
Thank you for your multitools.

+2

-
Who owns the designs after all this?
We're (mostly) good spirited and fine folk here, but let's say drawings and maybe even a prototype gets made up and someone (existing producer, freelancer, whoever) decides to build it - Who has rights for the IP?
-
Dear Leatherman,
Thank you for your multitools.

+1 also
-
I'b be more than happy with a mini Surge, how hard can that be Leatherman
That's what I thought of. A Surge TTi, in the Charge chassis but with big scissors, blade exchanger and awl. Keep the Charge TTi blades. Voilà!
On the other hand, I'm not sure I would use that instead of the Spirit.
So I might ask for:
- Tighter tolerances.
- Shinny brushed steel.
- No rust please. No rust, you hear me?
- Musical opening and closing.
- Springs! Individual and precise.
- Rounded edges, for us that work mainly with our mind and our hands are better suited to women caressing than rope climbing.
- Can you make it slim and slender? (That's a difficult one).
- Add some kind of a ratchet.
- Ask a reasonable price for it. By reasonable I mean less than 1/2 of what you are thinking (as your greatest antagonist does).
- Finally, make it yodel, if you know what I mean.

Then I would (maybe) EDC it.
+100 absolutely best response I have read in years...
-
I'b be more than happy with a mini Surge, how hard can that be Leatherman
That's what I thought of. A Surge TTi, in the Charge chassis but with big scissors, blade exchanger and awl. Keep the Charge TTi blades. Voilà!
On the other hand, I'm not sure I would use that instead of the Spirit.
So I might ask for:
- Tighter tolerances.
- Shinny brushed steel.
- No rust please. No rust, you hear me?
- Musical opening and closing.
- Springs! Individual and precise.
- Rounded edges, for us that work mainly with our mind and our hands are better suited to women caressing than rope climbing.
- Can you make it slim and slender? (That's a difficult one).
- Add some kind of a ratchet.
- Ask a reasonable price for it. By reasonable I mean less than 1/2 of what you are thinking (as your greatest antagonist does).
- Finally, make it yodel, if you know what I mean.

Then I would (maybe) EDC it.
+100 absolutely best response I have read in years...
Almost, I don't want it to yodel, I want it to rock and I don't it to be slippery.
-
@Sea Monster said:
Who owns the designs after all this?We're (mostly) good spirited and fine folk here, but let's say drawings and maybe even a prototype gets made up and someone (existing producer, freelancer, whoever) decides to build it - Who has rights for the IP?
Great question. I thought you guys were the brains around here?
-
Interesting thread... Don't know If I can contribute much though...
Here's something that's been on my mind... Any reasons why the juice line has the pivot and tool pins (if that's the correct term) peened instead if torx screws? Why kill the KF4? Why not have something like a KF4 but with scissors instead of serrated blade?
Beefier plier heads like the skeletool's would also be nice.
I like the wave... just lacks the awl... a ratchet device would be nice too...
On a local LM users community, I see a lot of questions daily how to go about claiming warranty and with pictures of broken tools... All praises for LM in making customers happy, but is this a sign of a drop in QC?
Sent from my iPhone using Tapatalk
-
Broken LM tools and warranty claims have got to be big part of their "business". I saw a y-tube of a guy telling people to buy broken tools off flea bay so they can return them to LM for new tools
.I'd say a broken parts is both user error and abuse as well as QC issues like heat treat. I have not broken any part off my Wave but my Juice back springs have broke. I have also snapped the tip off my small flat driver un screwing a screw using my ST300.
I recently decided to carry my Charge TTi. I originally got this tool from a guy who barely used it. I carried it but the CC plier head turned me off. Anyway, after going thru the tool I was saddened to see how crappy the S30V blade grind is. I also noticed how uneven the Ti scales are. The file has an awful rub either opening or closing. The diamond side hits the inside of the frame and is filing away material.
The inside tools don't clump and the plier head is well done tho. It also looks like theres different torx on one side. The star is set deeper on one side while the star is "raised" on the other. Not sure if its meant to be that way or what.
On a tool at this price point I'd really expect higher FnF. If you are going to use S30V you should really take the time to do it justice.
IMO the tool should be gone thru a lot more closely vs the Wingman for instance prior to shipping.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
