MLCT Crony - Need your input!
-
Yea its working well, we gave a little bit too much tolerance for oversized bolts so we will shrink it by a little bit closer to nominal size, and the real one made of steel wont strip as easily as the aluminum. But the design is working!
-Dough
-
Would you guys be terribly disappointed if the magnifying lens was a fresnel lens? I'm having a hell of a time finding a double convex lens with an OD of approx 16mm and a decent magnification. I have one on hand, but I got it a while ago from destroying an old pocket microscope, so I dont know where I could get it from a supplier. I would hate to go with a fresnel, but I'm not sure what else to do.
-Dough
-
@DoughDTD said:
Would you guys be terribly disappointed if the magnifying lens was a fresnel lens? I'm having a hell of a time finding a double convex lens with an OD of approx 16mm and a decent magnification. I have one on hand, but I got it a while ago from destroying an old pocket microscope, so I dont know where I could get it from a supplier. I would hate to go with a fresnel, but I'm not sure what else to do.-Dough
Remind me - What is a fresnel lens again?
-
Its a flat piece of plastic that acts as a magnifier.

This is a biconvex lens
This is a Fresnel lens-Dough
-
Fresnel lens is a good choice. They come with the AMK (adventure medical kits) psk, the ones I've handled preformed very well. Never tried one that's been cut to 16mm diameter, Dough if you can try it out, and see if you can use it to start a fire.
-
I just purchased several to do some testing with, and they should be here within the week. Hopefully they will preform how I want them to.
On a different note, high quality steel parts will be run tomorrow!!!
-Dough
-
I'm looking forwards to getting a steel version myself, and believe it'll perform well. Now if the price is right I'd really like a titanium version, but the reality is Ti is pricey.
p.s. have you been thinking of a version with a seat belt cutter and an oxygen key? I'll try to take some pics of my benchmade with both, but you probably know what I'm talking about.
-
I thought about Ti, but the price would shoot up quite a bit due to material and machining costs. I thought alot about the belt cutter, but the problem isnt that it would take place of the magnifying glass...i could live with that... but we would also loose the inch and metric scales, which I kind of find useful even if they are small.
-Dough
PS. There doesnt just have to be one model... if this comes out and theres overwhelming support to add/remove/change things, then the crony can soon be followed by a different model to address those wants and needs!
-
as promised zzz....

-
Oppps wrong pic/tool :P you are right there could be different versions of the tool. Survival version with a magnifier, and or firesteel striker for example. Rescue model with the seat belt cutter, oxygen key, and maybe even a glass breaker.

-
one more

-
...

-
@donvito said:
Oppps wrong pic/tool :P you are right there could be different versions of the tool. Survival version with a magnifier, and or firesteel striker for example. Rescue model with the seat belt cutter, oxygen key, and maybe even a glass breaker.Thats a good idea donvito! I'll look into a slight redesign for a rescue model!
-Dough
-
Oppps wrong pic/tool :P you are right there could be different versions of the tool. Survival version with a magnifier, and or firesteel striker for example. Rescue model with the seat belt cutter, oxygen key, and maybe even a glass breaker.
Thats a good idea donvito! I'll look into a slight redesign for a rescue model!
-Dough
Sure thing. The different models don't have to be modified in a drastic way, the first model can be used as a platform for other versions. Other models can be made with addition, omission and/or substitution of features.
Let's keep our fingers crossed for now, and hope the first tool takes off the ground soon.
-
Well we made two steel versions of the tool today. It will take a little bit of time for us to tweak our skills in order to get the perfect grind for the prybar portion. It may end up, however, that we have to ditch the wire stripper/wire cutter function as it makes it very difficult to sharpen the inside of the prybar notch. :'( :'( It makes me very sad.... On the other hand, the steel version, which was just regular carbon steel, worked EXCELLENTLY!!! We turned several bolts with no problem, used the 1/4 hex bit driver on a few screws, and used the combo philips/flat driver on a few screws as well. Progress is very steady in the positive direction my friends, and we should have production cranking out in the next couple weeks!!!
-Dough
-
I'm having a hell of a time finding a double convex lens with an OD of approx 16mm and a decent magnification. -Dough
You didn't ask the right geek. :ahhh
Check the DCX box and put in a diameter of 16. A bit pricey, but maybe worth experimenting with.
HTH-
-steve
Lol too late, I've been there already and that would be way too much for the lens. I was looking for a lens around 2-3 bucks a pop, not 10.
Thanks for the link though! So how would everyone else feel about a Fresnel lens in place of a regular?-Dough
-
to me its all the same what kind of lence it has,as long as it can be used to make fire

-
We're throwing around the idea of nixing the magnifying glass. What would you guys like to see in that big blank space instead of a magnifying glass. We might be able to shift the 1/4" hex-driver there, and have a ball bearing insert to lock the bits in place, but I'd like to see a totally different implement, so throw you're ideas my way.
PS. The project has slowed a bit due to the end-of-the-semester crunch time. We do have a couple steel parts made up though, and we'll see what we can do about sending them out even though they are smurftier steel (not even stainless), a little smurfed up on the grinding operation (trying some things out, ended up screwing up the grinding) and have the hole for the magnifying glass. Hopefully we can get the passaround parts out before the end of the semester. -
The two round tools that spring to mind are a compass and a 360 protractor. The protractor would be very rough due to the small size however.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login