Need help picking a full-sized MT
-
Al make some good points but forgot one, the Surge along with Swiss tool has very good scissors. But those two tools are big and are rather heavy for most to carry.
-
@ducttapetech said:
Al make some good points but forgot one, the Surge along with Swiss tool has very good scissors. But those two tools are big and are rather heavy for most to carry.You need Space Marine power-armour to help carry either one.
Al is correct - the Huntsman is a great starting off point - friendly and useful enough as a stand alone, with a pliers based tool, or maybe just pliers to complement it.
-
Welcome to the forum

I would also suggest the LM Wave

-
When I first considering a MT, I kept telling myself to seek for as many OHO tools as possible and as many outside tools as possible. I wished to have many many tools in a small package. However, the tools that you don't use are just actually extra ounces. The OHO tools that you don't always need are just decorative. Consider what tools you need most and consider what outside tools you prefer, and consider which OHO tools you will need. Pairing your new tools to your current tools are good idea. Like you have a squirt, you can pair it up with tools like skeletool or Rebar. It provides you adequate versitility and save your wallet. Like pairing up the hustman with Rebar, you will have good scissors, nice saw, and nice pliers. You only miss an OHO blade. If you need OHO blade a lot, maybe get a cheap folder.
-
Welcome to 
OK, let me sum up. Requirements: drivers, knife, scissors, openers, file, pliers, outside and/or OH access, eyeglass screwdriver.
@50ft-trad said:
The truth is that when you try and decide between pliers tool vs Swiss knife, nine times out of ten, a combo wins.Agreed!
Here's one idea: Ranger + Skeletool That would give you everything on your list. Could probably get this for about $75 total on eBay.
Another idea: Blast + cheap folder (like the Ontario RAT Model II). The only thing you'd be missing here is outside access. You might be able to get this combo for $60 total eBay. -
My .02 worth. I think any multitool with everything you want will be too large to pocket carry. I find that splitting them up over 2 tools in 2 pockets, allows an easier carry without compromise.
For example. My requirements were OHO blade, scissors, pliers, screwdriver and pocket clip. So my solution became the Skeletool paired with another keychain or easily pocket carried tool that had scissors. For a long time it was the Style CS but now I'm loving this Pioneer X. Vic scissors are just awesome.
So my recommendation would be a Skeletool plus the squirt or your SAK on a pocket dangler.
I vote Skeletool bc it's OHO, easy pocket carry and it has removable bits so you could get or make a bit kit for it and have a variety of driver options. -
Welcome to
You have plenty of great suggestions already so I'll leave it at that 
-
I'll parrot some other posters here and say when in doubt, buy second hand. Best way to get a high end tool for a budget price

I would also like to note that, aside from the one-hand opening blade, it sounds like a Victorinox Handyman might be a good fit. SAK pliers can certainly handle thorn duty, and you get a decent file, plus the corkscrew can accommodate the eyeglass driver.
Looks like they're about $65 new, but you might be able to find a better deal.
-
Welcome!!! I have a few full sized multitools and I will go along with some others in saying go with the Victorinox Spirit! In my opinion it is one if the best designs out there. The all-outside-accessible is extremely useful. You can always carry a OHO knife in another pocket. If I had to choose one to use and sell the rest, it would be my Vic Spirit or my LM Charge Tti (basically a wave) with bits and extenders.
-
Welcome! The search for the "One Tool" is pretty common around here :) Like others have mentioned, I usually carry a combo of tools to get everything just the way I want it, but as we all have different wants/needs/priorities, there's no right answer for everyone :)
I was going to agree with most here that a Wave or a Spirit would be the closest all-in-one option to what you want. But I thought about the original, gen 1 Wave, which I think fixes some of the issues you have with the current Wave. 3D phillips instead of bit driver, larger scissors (which I happen to like a lot, you may find others on here that disagree), and it's a tad smaller/more pocketable. It's also going to be cheaper because you'd have to buy secondhand (as it's discontinued), which is also the one problem, it's not readily available. But folks will sell them here on the forum occasionally, and that auction site will have some pop up once in a while as well (most are just listed as "Wave" so you'd have to know to look for the gen 1 version).
Let us know how the search goes, I've had a lot of fun with the search (despite the sadness from my wallet...).
-
Plenty of used Waves both original and second gen on E-bay for $50 or less
This guy has some of both
-
Welcome to the forum,
For reliability, performance in all weather and life-time warranty... Swiss Tool and you'll be done, happy and satisfied.
The form and finish cannot be approached by any of the others. Precision machining and millions sold. Tools thst lock fpr your safety, heck I could go on for ever but you get the message. -
Tough choice between the Spirit and Wave. My only real complaint on the Spirit is the scissors. The tool is pretty spectacular in everything mentioned above and throughout this forum. The tool density is seriously second to none. The quality is spot on as well.
The Wave is a great tool. The scissors are small but IMO better than the Spirits. With 4 OHO tools one being a diamond file thats really pretty great. My argument for the Wave is always, what happens when you run into the hex or star fastener? Two words, Bit Kit, which is very easy to carry by the way. You can add a pocket clip makes it nudge out the Spirit in your case tho some have added a clip to their Spirits.
I do have a BO Wave up for sale but please note that its a Cap Crimper Plier Head.
Now all that being said, it really is about combinations. A SAK and MT are really like PB&J, they just go together.
You would not be unhappy with either Spirit or Wave quite honestly.
-
Just a couple extra thoughts here.. i personally like the scissors on the spirit and the wave. They are stout and will cut through some rough material. While I do wish they opened up a little farther, the Spirit scissors almost behave like a tiny set of shears.
-
@gdoolittle said:
Just a couple extra thoughts here.. i personally like the scissors on the spirit and the wave. They are stout and will cut through some rough material. While I do wish they opened up a little farther, the Spirit scissors almost behave like a tiny set of shears.
I don't really use mine enough. I was put off when I was cutting fabric and just haven't really gave them a chance again. I carry a 91mm and those scissors are so terrific theres no reason to not use them. I must also confess I don't use my Waves scissors since I my SAK scissors are always at hand. I modded a Wave to include them in place of the serrated blade. -
@gdoolittle said:
Just a couple extra thoughts here.. i personally like the scissors on the spirit and the wave. They are stout and will cut through some rough material. While I do wish they opened up a little farther, the Spirit scissors almost behave like a tiny set of shears.
I don't really use mine enough. I was put off when I was cutting fabric and just haven't really gave them a chance again. I carry a 91mm and those scissors are so terrific theres no reason to not use them. I must also confess I don't use my Waves scissors since I my SAK scissors are always at hand. I modded a Wave to include them in place of the serrated blade.One thing i do hate with either pair is cutting paper. I would much rather have a 91mm for that. I have carried a micra around recently, so havent had a need for any of them this past couple weeks.
-
Aaaand another one that votes COMBO here. Get a nice combination of MT + SAk, it's easier to carry, if you lose one you'll always have the other and you'll be honoring both the SAK crew and the MT fans. And those SS/BO + Red or Alox scales just look awesome together for shots like these

My choice was Rebar + Rambler as I wanted very precise Scissors, tough but precise NN pliers, large file, saw and tough sturdy bits, plus precision tools (drivers on the Minichamp). All practical, nice and easy to carry everywhere :ahhh
-

Guys, the topic says: "Need help picking a full-sized MT"Not "Need help picking a full-combo of MT, SAK and a folder with smaller backup SAK".


-
Well rebar is best pocket carry from larger plier based MTs. Wave I did not like to pocket carry. One reason those OHO tools. I like spirit and rebar more.
But as options needed were quite directly wave features, can't say think again about needed features. If wave is what you need, that should be best option.
-
Hey welcome to the forum. If you don't want to buy new comb eBay. Plenty of good deals for a Wave there.
For example http://www.ebay.com/itm/391683679696
No ties to seller, but there are options. Also it's worth saving up for the thing you want/need. The wave will not disappoint. Also get the pocket clip for it. Well worth it
Happy hunting
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login