Parts for Upgrade/Repair Leatherman multitools
-
@irona said:
Hi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!reference Information
Diameter axes:
The diameter of the PST pliers axis - 4.8mm, length 9mm
Diameter pliers axis Wave Original - 4.8mm, length of 14.4 mm
Diameter pliers axis Wave New - 5.5mm, length of 13.3 mm
Diameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?
Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mm
Diameter pliers axis Surge - 5.5mm, length 15.5mm
The diameter of the PST tool axis - 4.8mm
The diameter of the tool axis Wave Original -4.8 mm, length 13.1 mm
The diameter of the tool axis Wave - 4.8mm
The diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?
The diameter of the tool axis ST300 - 4.8mm
Shaft diameter with tools Surge- 4.8mm, Length 16.7mmThickness tools:
Phillips screwdriver Kick / Fuse / Blast - 5mm
Opener Kick / Fuse / Blast / Wave / Charge - 1,87mm
Knife Kick - 1,74mm
Ring Lanyard Kick / Fuse / Blast - 0,77 mm
All the other instruments (approximately) - 2,34-2,36mmTools SOG - 1,98mm (except adapter on bits)
-
Hi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!
reference Information
Diameter axes:
The diameter of the PST pliers axis - 4.8mm, length 9mm
Diameter pliers axis Wave Original - 4.8mm, length of 14.4 mm
Diameter pliers axis Wave New - 5.5mm, length of 13.3 mm
Diameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?
Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mm
Diameter pliers axis Surge - 5.5mm, length 15.5mm
The diameter of the PST tool axis - 4.8mm
The diameter of the tool axis Wave Original -4.8 mm, length 13.1 mm
The diameter of the tool axis Wave - 4.8mm
The diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?
The diameter of the tool axis ST300 - 4.8mm
Shaft diameter with tools Surge- 4.8mm, Length 16.7mmThickness tools:
Phillips screwdriver Kick / Fuse / Blast - 5mm
Opener Kick / Fuse / Blast / Wave / Charge - 1,87mm
Knife Kick - 1,74mm
Ring Lanyard Kick / Fuse / Blast - 0,77 mm
All the other instruments (approximately) - 2,34-2,36mmTools SOG - 1,98mm (except adapter on bits)
Perfect, thank you!
-
You mentioned that you could get new or used parts, how much would it be for a rebar saw?
-
Got my parts today and finished my hack (posted in Mod Squad). Thanks so much Loki!!!!
-
I need to keep an eye on this for surge small bit holder again in the future. Only just signed up so post count low also.
Sent from my iPad using Tapatalk
-
Do you still have any of the Charge knife blades (not serrated)? I just bought my first Wave and I want to upgrade the knife on it. I'm in Missouri (USA), if it matters. Thanks!
-
@Booba5 said:
Do you still have any of the Charge knife blades (not serrated)? I just bought my first Wave and I want to upgrade the knife on it. I'm in Missouri (USA), if it matters. Thanks!I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)
It's blades for new wave (after 2004)
-
Do you still have any of the Charge knife blades (not serrated)? I just bought my first Wave and I want to upgrade the knife on it. I'm in Missouri (USA), if it matters. Thanks!
I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)
It's blades for new wave (after 2004)
I can swap out the standard Wave blade (420c) and put the 154cm Charge blade in it's place, right?
-
Do you still have any of the Charge knife blades (not serrated)? I just bought my first Wave and I want to upgrade the knife on it. I'm in Missouri (USA), if it matters. Thanks!
I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)
It's blades for new wave (after 2004)
I can swap out the standard Wave blade (420c) and put the 154cm Charge blade in it's place, right?
Yes
Отправлено с моего Redmi 3S через Tapatalk
-
Awesome, how can I message you? I don't see a way to private message you, I'm new to the site. I'd like to exchange payment information and give you my shipping address. Thank you!
-
Gotcha, 3 down, 2 to go. I'll go introduce myself and what not, you'll be getting a PM from me shortly!
-
[quote author=loki-mobile link=topic=64314.msg1217318#msg1217318 date=1453830683]
There were parts of upgrade / repair Leatherman multitools ...........................................Hi,loki-mobile:
I need below parts. pls offer price. my recipient address in Taiwan !
a. Rebar Pliers
b. Wingman scissors
c. Surge big bits holderTKS
-
@hans said:
[quote author=loki-mobile link=topic=64314.msg1217318#msg1217318 date=1453830683]
There were parts of upgrade / repair Leatherman multitools ...........................................Hi,loki-mobile:
I need below parts. pls offer price. my recipient address in Taiwan !
a. Rebar Pliers
b. Wingman scissors
c. Surge big bits holderTKS
Sorry. Rebar Pliers out of stock.
Other parts available -
Any "used" but in good condition Charge 154CM blade or a S30V blade? Also need a Charge Serrated Blade with Hook.
Thanks.
-
I'm looking for both small driver and large bit driver adapters for the surge if in stock.
Sent from my iPhone using Tapatalk
-
Hi Loki,
I am looking for the small pivoting bit holder from a Leatherman Wave or Charge. Do you have one?
Mk -
I received my S30v blade today in perfect condition and very quickly! Thank you!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login