Tread Owners Club
-
I'm also happy to report that after a few minutes in an ultrasonic cleaner, all the dirt and gunk (see reposted photo below) is gone.

-
So to follow up, today I received the replacement link from Leatherman in the mail. There was no note, letter, invoice, or anything other than the part, which was in a small plastic bag inside of a small Leatherman-branded box, which itself was stuffed inside a padded envelope mailer. So I have no idea if they want the old link back or not. I originally offered to send it to them, but they only said they would send me the new link, and never said anything about wanting the old one back.
I swapped the new link in for the old. Here's a photo. You can really tell the difference between the shiny new one and the scratched-up older links next to it.

-
I recently bought an open box SS Tread for under $100. My initial concern was with people complaining about the Tread being too heavy. Though almost 6' tall, I have small wrists. I chose to remove link #2 (#1-2 Philips - 3/16" flat and 1/4" hex driver) and link #4 (pick - cutting hook and carbide breaker). It fits slightly loose, but not rolling around. Removing the slim link would make it too small.
The adjusted Tread is lighter than my Seiko watch.Even with the two links, it is still lighter. I guess the weight complains came from people used to wearing digital watches. Before the purchase, I thought the Tread looked silly on a man wrist. Now I have it, I think it will make a great tacticool watch band. One thing I notice is the Tread is more comfortable with the clasp on top of the wrist. It feels natural like a watch. It will be nice if a watch face can be adapted on top of the clasp, meaning the 1/4" square driver will be right next to the watch face. A feature I notice is some links have the sides between two holes hollowed out in the shape of LM's proprietary flat bits. This hole is too big, the flat bit will slide thru. I can see LM potentially incorporate a bit driver on one link, and store a few bits in other links for a Tread 2.
I am interested in the thread size of the screws. The thread looks like 5.5mm. I would have preferred a T10 torx head instead of slot. For the current screws, I prefer the slot narrower, so the large flat head on the Surge can fit better. Why would someone by a $150+ tool and use a 1c tool (penny) for adjustment? LM thought people remove links on the go or something?
-
My cheapo calipers played trick on me. I thought I was reading .200" something, so I said 5.5mm screw thread in previous post. The thread is #4-48. I am surprised LM did not go with metric. This screw is uncommon. Its dimensions are of #4 stripper screws. I can find #4-40 stripper screws easily with different head configuration (slot, hex, torx...) by google, but could not find #4-48, except for some expensive stainless version with knurled head. Assume LM bought them special in bulk at $0.25/pc, that is at least $10 just for those 40 screws in the package.
-
Question,
Are there two different Tread versions?
I have seen differences in the cutter sections and the screws

-
Anyone who knows..
Whery to buy or order separate links ?
I cannot find anything about it.
Would be nice to select your own favorite "bits and pieces"..
-
Doesn't happen much here. No so many Tread owners maybe?.
-

Sent from my iPhone using Tapatalk
-
Been wearing my SS tread a lot lately, been getting a lot of comments from customers. Saw another guy in town that had one but he didn't look like the talkative kind so I didn't get to ask him how he liked his.
Sent from my SM-G935V using Tapatalk
-
So how's your tread going
Sent from my iPhone using Tapatalk
-
One way or another, I ended up with 3 Treads :P SS, Black, and Metric Black. The one I occasionally wear is the SS, in place of a watch, just for fun in the weekend. I have 6 + half links to fit my wrist. The Tread is not as heavy as my first impression of it. It feels natural just like a watch. No, I have no intention to use it at a multi tool, just strictly a bracelet.
The Metric Tread introduces 5 more links. I wonder if Leatherman will introduce more link configurations in the future. A few things I wish Leatherman consider:
- Sell the clasp and the half link (link #1) separately: I can make another Tread out of the spare links.
- Design a watch link: not a watch face that fit the links, not ChronoLink... a watch link in its own, with just time function. May be some protection around the face. Point is, it will truly make the Tread a multi-tool watch.
-
I just noticed that the little scribe bit is missing from the link where it's supposed to be. There's an empty hole there now. I'm not sure how it would've fallen out. So I guess I'll try to make this a warranty issue. I have no experience with Leatherman warranty service. Will they send me a new link first or make me send them the damaged link first? Or will they make me send them the whole tool? Do I have to pay for shipping?

I contacted Leatherman directly. I included the photo and described what the problem was, and I said I'd hate to have to send in the whole Tread and be without it for however long, since I wear it daily. I asked if they could just send me a replacement link and then I could send the old one back, and they said they would be happy to send me a replacement link. All they needed was my address (which I sent). I'm very happy with this outcome.
I just noticed that the scribe insert is missing from the replacement link, just like it went missing from the original link. I'm not sure how long it's been gone, but I suspect not for very long. I recently used the SIM ejection tool and probably would've noticed if the insert was missing then, though of course I can't be certain.
But anyway, this is the second time the scribe insert has disappeared. And I've never even used the scribe tool! I don't think my wearing of the Tread could even be said to be "heavy duty usage" since I actually rarely use it for anything at all.
Has this happened to anyone else yet? Why don't you go check your own Treads and see if yours is still there...
-
To follow up on my above follow-up, I emailed Leatherman customer service about this. I actually replied to the email I got from them almost a year ago when it happened the first time. I haven't received an actual response from them, but I did receive a new replacement link in the mail.
-
Am no longer a Tread owner. About a year ago I went with a Fitbit and there really was no room to wear the Tread. It helped on some projects here and there, yet it went often unused. A facebook friend, Tracy R. wanted one a while back but the guy is a solo parent and raising two daughters. His advice over time was welcomed, and he would occasionally send me things that I couldn't find here. So, to make his day, I sent my Tread to him last week. :D
-
@Outback in Idaho said:
Am no longer a Tread owner. About a year ago I went with a Fitbit and there really was no room to wear the Tread. It helped on some projects here and there, yet it went often unused. A facebook friend, Tracy R. wanted one a while back but the guy is a solo parent and raising two daughters. His advice over time was welcomed, and he would occasionally send me things that I couldn't find here. So, to make his day, I sent my Tread to him last week. :DNice to see you OIO
That was a very nice RAK indeed 8) :o

-
Yeah good to see ya around. Wonderful of you to offer up the Tread to a buddy.
-
Rust in my Tread ???




-
Welcome to

That is crazy to see rust on a Tread :o Do you wear it all the time and think that maybe sweat caused this

-
THX

I made my own stainless steel clutches. They are no longer corrosion. Sorry I do not speak very well English. (I´m from Czech Republic)

-
Interestingly, Leatherman's reaction to my problem: :o
Thank you for contacting Leatherman Tool Group, Inc.
We are sorry to hear that you are having issues with your Tread. Our tread is made out of a 400 series steel which is able to rust without proper cleaning. With the aggressive sweat on the hands and not rinsing an drying every day this could be the cause of the rust. You can clean it with WD-40 and a scotch bride pad. I would recommend rinsing and drying after every use. I hope this is helpful.
Best Regards,
Chalese Gray
Customer Service
Leatherman Tool Group, Inc.
Leatherman / LED LENSER
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login