Is multitool design stagnant ?
-
An... "interesting" question.
First I'd want to know what you mean by "stagnant". As I would use the term, car design is stagnant. Other than a few outlier hybrids and electrics, there isn't a single thing new in cars since fuel injection, ABS and automatic transmissions became standard. OK, maybe making frames out of a aluminum- lighter weight, but less robust and honestly not an improvement nor a savings. (I spent about the same repairing damage I believe done to my Sonata while pulling it out of a ditch due to a lack of proper tow points than I'll save over the car's life cycle in fuel savings). You have an infernal combustion engine burning dead dinosaurs and a metal box with some windows and doors; add four rubber tires and some lights. Tada, it's a car. Fuel economy isn't much better than it was a decade ago, they've peaked until the cutting edge improves and drops in price.
So if that is "stagnant", yes, multitools are stagnant. THere isn't a single new thing since the Gerber introduced the sliding head used on the Multiplier except maybe a slight refinement here or there in 20 years. A hammer butt on a knife or a tool isn't new. The Crunch is probably the most radical thing in production today.
Multipurpose knives like SAKs haven't seen a real evolution in my lifetime.
Doesn't change that there is always work being done. And every year or two you should bring out some new models. Thats the nature of modern manufacturing and economics.
-
@ironraven said:
An... "interesting" question.First I'd want to know what you mean by "stagnant". As I would use the term, car design is stagnant. Other than a few outlier hybrids and electrics, there isn't a single thing new in cars since fuel injection, ABS and automatic transmissions became standard. OK, maybe making frames out of a aluminum- lighter weight, but less robust and honestly not an improvement nor a savings. (I spent about the same repairing damage I believe done to my Sonata while pulling it out of a ditch due to a lack of proper tow points than I'll save over the car's life cycle in fuel savings). You have an infernal combustion engine burning dead dinosaurs and a metal box with some windows and doors; add four rubber tires and some lights. Tada, it's a car. Fuel economy isn't much better than it was a decade ago, they've peaked until the cutting edge improves and drops in price.
So if that is "stagnant", yes, multitools are stagnant. THere isn't a single new thing since the Gerber introduced the sliding head used on the Multiplier except maybe a slight refinement here or there in 20 years. A hammer butt on a knife or a tool isn't new. The Crunch is probably the most radical thing in production today.
Multipurpose knives like SAKs haven't seen a real evolution in my lifetime.
Doesn't change that there is always work being done. And every year or two you should bring out some new models. Thats the nature of modern manufacturing and economics.
I have to disagree on car design being stagnant.
That subtle change in the line of your car might well have a deeper reason than simple aesthetics. European car companies simulate accidents with pedestrians and cyclists, the idea in general is that the victim does not end up below, but above the car.Sometimes innovation is not as obvious. We got the big innovations down pretty well, I mean, wheels should be round not square...But there is so much more to wheels. The rubber and texture of tires is a science that has a huge impact on safety, comfort and fuel economy.
Or the attached image... its just a knife, no innovation about it, right?
Or is there?
Can you figure it out?Spoiler:
This steak knife stands upright on the cutting board, without the edge touching the board.
Ok, admittedly it is not so well visible on the image, but believe me, its more prominent if you see it for real.
Do we need this? Not really, but it is neat.
-
@ironraven said:
An... "interesting" question.First I'd want to know what you mean by "stagnant". As I would use the term, car design is stagnant. Other than a few outlier hybrids and electrics, there isn't a single thing new in cars since fuel injection, ABS and automatic transmissions became standard. OK, maybe making frames out of a aluminum- lighter weight, but less robust and honestly not an improvement nor a savings. (I spent about the same repairing damage I believe done to my Sonata while pulling it out of a ditch due to a lack of proper tow points than I'll save over the car's life cycle in fuel savings). You have an infernal combustion engine burning dead dinosaurs and a metal box with some windows and doors; add four rubber tires and some lights. Tada, it's a car. Fuel economy isn't much better than it was a decade ago, they've peaked until the cutting edge improves and drops in price.
So if that is "stagnant", yes, multitools are stagnant. THere isn't a single new thing since the Gerber introduced the sliding head used on the Multiplier except maybe a slight refinement here or there in 20 years. A hammer butt on a knife or a tool isn't new. The Crunch is probably the most radical thing in production today.
Multipurpose knives like SAKs haven't seen a real evolution in my lifetime.
Doesn't change that there is always work being done. And every year or two you should bring out some new models. Thats the nature of modern manufacturing and economics.
Well said and spot on.
-
Also you could ask is work you do stangant in area where multitools are used. Vic cybertool and squirt E4 are ok examples from multitools focuced to IT and electricity. But as general multitools are focused to handwork. Again there are survival multitools and rescue multitools recently. And from mans jewelery tread. But seems most multipurpose need is handwork related multitools meaning popular toolsets like pliers, screwdrivers, bottle opener, file, saw, knife, scissors. Old inventions from tool side. In there maybe diamond file is newest innovation. So I could say mechanical tools area is quite slow with innovations. One of the most recent additions to survival MT is whistle and fire making tool. Which as invention (make fire) is quite old.
But I see changes and think rescue tool is one larger example. Still need of common tools have remained quite same.
-
Very good point about Bear & Son above.
It's a pity they don't try harder in the UK.
They are now a unique company in that not only are they USA built ( yay!!) but the fact that they cater for different tasks
The Gardener
The Electrician
The Blunt Nosed MTAll well made and sadly not available here in the UK.
I can picture the Gardener in Garden Centres/Camping Shops
The Electrician in Electrical stores/ Home DIY outlets
And the basic Blunt nose would sell in any of the above plus more scope too.
I only have a few Bear and Sons but I am hoping to get the Shears and Electrician this year.
-
I just wish Victorinox would put pocket clips on knives more, it would be so handy.
-
@tosh said:
Very good point about Bear & Son above.
It's a pity they don't try harder in the UK.
They are now a unique company in that not only are they USA built ( yay!!) but the fact that they cater for different tasks
The Gardener
The Electrician
The Blunt Nosed MTAll well made and sadly not available here in the UK.
I can picture the Gardener in Garden Centres/Camping Shops
The Electrician in Electrical stores/ Home DIY outlets
And the basic Blunt nose would sell in any of the above plus more scope too.
I only have a few Bear and Sons but I am hoping to get the Shears and Electrician this year.
You can't even find them here, in the US. If they were to improve their quality and QC, get their products in more stores, and price their multis to compete with LM, I think they'd have a gold mine on their hands. The knife store near me carries half a dozen different Bear knives, and a few more Remingtons (made by them)--they're the only place that even sells the brand (and they claim to be the largest knife store in my area), they don't even carry the Bear Jaws tools--I guess because they'd take from two strong sellers--Vic and LM.
-
Very good point about Bear & Son above.
It's a pity they don't try harder in the UK.
They are now a unique company in that not only are they USA built ( yay!!) but the fact that they cater for different tasks
The Gardener
The Electrician
The Blunt Nosed MTAll well made and sadly not available here in the UK.
I can picture the Gardener in Garden Centres/Camping Shops
The Electrician in Electrical stores/ Home DIY outlets
And the basic Blunt nose would sell in any of the above plus more scope too.
I only have a few Bear and Sons but I am hoping to get the Shears and Electrician this year.
You can't even find them here, in the US. If they were to improve their quality and QC, get their products in more stores, and price their multis to compete with LM, I think they'd have a gold mine on their hands. The knife store near me carries half a dozen different Bear knives, and a few more Remingtons (made by them)--they're the only place that even sells the brand (and they claim to be the largest knife store in my area), they don't even carry the Bear Jaws tools--I guess because they'd take from two strong sellers--Vic and LM.
I do believe you are right. I also recall Grant having a conversation with the owners and they don't care for their multi tool line. I wonder if being bought out by Vic and them using their patent to make the Swisstool has anything to do with that?
either way I would be all for them investing more r & d into their multi tool line -
Very good point about Bear & Son above.
It's a pity they don't try harder in the UK.
They are now a unique company in that not only are they USA built ( yay!!) but the fact that they cater for different tasks
The Gardener
The Electrician
The Blunt Nosed MTAll well made and sadly not available here in the UK.
I can picture the Gardener in Garden Centres/Camping Shops
The Electrician in Electrical stores/ Home DIY outlets
And the basic Blunt nose would sell in any of the above plus more scope too.
I only have a few Bear and Sons but I am hoping to get the Shears and Electrician this year.
You can't even find them here, in the US. If they were to improve their quality and QC, get their products in more stores, and price their multis to compete with LM, I think they'd have a gold mine on their hands. The knife store near me carries half a dozen different Bear knives, and a few more Remingtons (made by them)--they're the only place that even sells the brand (and they claim to be the largest knife store in my area), they don't even carry the Bear Jaws tools--I guess because they'd take from two strong sellers--Vic and LM.
I do believe you are right. I also recall Grant having a conversation with the owners and they don't care for their multi tool line. I wonder if being bought out by Vic and them using their patent to make the Swisstool has anything to do with that?
either way I would be all for them investing more r & d into their multi tool lineIt all comes down to profit.
They probably don't care for their multi tool line because they sell at the same price as their knifes. So if they had to improve quality and QC AND lower the price, profit per unit would go even further down. At the same time they would have to battle LM, Vic and Gerber for market share.
Yes, it would be awesome, if we got more different designs. Luckily for me, I'm not even through with what is currently available.
Tools to try out for me
- One from Al mar
- Gerber Center Drive
- Ranger line
- Wenger SwissGrip
- SOG Sync / Baton
-
Very good point about Bear & Son above.
It's a pity they don't try harder in the UK.
They are now a unique company in that not only are they USA built ( yay!!) but the fact that they cater for different tasks
The Gardener
The Electrician
The Blunt Nosed MTAll well made and sadly not available here in the UK.
I can picture the Gardener in Garden Centres/Camping Shops
The Electrician in Electrical stores/ Home DIY outlets
And the basic Blunt nose would sell in any of the above plus more scope too.
I only have a few Bear and Sons but I am hoping to get the Shears and Electrician this year.
You can't even find them here, in the US. If they were to improve their quality and QC, get their products in more stores, and price their multis to compete with LM, I think they'd have a gold mine on their hands. The knife store near me carries half a dozen different Bear knives, and a few more Remingtons (made by them)--they're the only place that even sells the brand (and they claim to be the largest knife store in my area), they don't even carry the Bear Jaws tools--I guess because they'd take from two strong sellers--Vic and LM.
I do believe you are right. I also recall Grant having a conversation with the owners and they don't care for their multi tool line. I wonder if being bought out by Vic and them using their patent to make the Swisstool has anything to do with that?
either way I would be all for them investing more r & d into their multi tool lineIt all comes down to profit.
They probably don't care for their multi tool line because they sell at the same price as their knifes. So if they had to improve quality and QC AND lower the price, profit per unit would go even further down. At the same time they would have to battle LM, Vic and Gerber for market share.
Yes, it would be awesome, if we got more different designs. Luckily for me, I'm not even through with what is currently available.
Tools to try out for me
- One from Al mar
- Gerber Center Drive
- Ranger line
- Wenger SwissGrip
- SOG Sync / Baton
Profit is definitely important. I don't think they need to lower their prices but improve QC for sure. They have a simple and intuitive design. It just needs a touch up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login