First time modding
-
@Booba5 said:
Well, that last long. Yesterday I went to use the scissors and they were extremely dull, so today I had a buddy sharpen them. After that I realized that the pivot was just loose (on the scissors) so I tightened it up a bit so all was well....for about 7 hours until the spring broke. SO at this point I'm going to replace the scissors with something else.I guess the question I have is Wingman scissors or SAK scissors? I'm thinking SAK, but which model do I look for? I obviously want the biggest scissors I can get away with (for the least amount of $ of course), and from the looks of these scissors, I can get a larger pair. Thanks in advance.
You should probably be fine with any 91mm Victorinox scissors so a second hand Climber is probably the cheapest way to go. The ones from Wenger (now also Victorinox) use another spring-solution that would mean a lot more work. From the design of the scissors you used they seem to be of Chinese or possibly German origin and you should find that the Swiss-made ones are much better.
-
Thanks for the info! I've found an old climber for ~$12 so that's not bad at all. I take it you think the Vic scissors are better than the Wingman scissors?
-
@Booba5 said:
Thanks for the info! I've found an old climber for ~$12 so that's not bad at all. I take it you think the Vic scissors are better than the Wingman scissors?I would say so yes, Vic scissors open wider while at the same time being more precise and having better ergonomics. On the other hand the spring is much less robust but can be replaced instead.

-
Had a pretty productive weekend, I received the SAK in the mail on Saturday, and swapped the scissors over after work. Definitely a harder metal than the old scissors, it killed every drill bit I had, and then some. I went ahead and put the JB weld dots on them, along with some on the knife. I'm wearing gloves at work 80% of the time so it makes opening and closing a lot easier. The S30v blade gets here tomorrow, and my friend will be sharpening it the day after that, so I have a few days to figure out if I like the dots on the blade or not.
Oh and I went ahead and did some polishing...came out pretty good, IMO. Eventually I'll polish up the plier heads as well. Here's some pics!
<a href="https://flic.kr/p/QBFmLw" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/519/31908881454_870d45b4b1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01302 by Scooby Walker, on Flickr<a href="https://flic.kr/p/QBFmA1" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/468/31908880844_fe6dd5cdf4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01300 by Scooby Walker, on Flickr
<a href="https://flic.kr/p/QBFmej" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/309/31908879644_b5309dc940_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01293 by Scooby Walker, on Flickr
<a href="https://flic.kr/p/QBFmrd" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5725/31908880334_972af3f124_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01298 by Scooby Walker, on Flickr
-
Shiny!
I like the JB Weld dots. very creative way of creating more purchase on the tools.
-
Looks great

-
Thanks guys, I think it turned out great! I went ahead and polished up the plier heads, There were a few dings that didn't come out, but nothing too major. I know it'll end up rubbing when I close, but that'll clean up easily and eventually it'll stop rubbing. This stuff is really addicting, I'll tell ya.
<a href="https://flic.kr/p/QBUVB5" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/453/31911528374_f43c0d1b3d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01307 by Scooby Walker, on Flickr
-
Great job !

-
Wow
Nice job on that Wave :o

-
Looks good!
I bought me a Wave, Rebar, and Wingman off of eBay as well, just haven't had time to do the mod yet. The more I have used my Surge with the replaceable wire cutters, the more I miss having the original head. The wire cutters just don't cut stranded wire that well and I save nail head and screw cutting for my linemans or a sawzaw. Think the original Wave head may stay. I plan on the wingman Scissors, 3D screwdriver from the Rebar and I think I will ditch the eyeglass screwdriver for a larger one. Scissors may go in the Rebar or possibly my Crunch! I got a pocket clip too. I hope to carry it when I'm not at work. -
Sounds like a plan! I have yet to cut any wiring with my Wave, but the chain link fencing I was cutting through was no problem at all. I ended up pulling the pliers out again and polishing them once more, I wasn't satisfied with the sides at all. Ironically, the sides took longer than everything else I have done...combined.
Anyways, S30v came in today, my buddy won't be able to get to sharpening it until the weekend, so I just went ahead and installed it now. I also had my wife line the inside of my sheath with microfiber, so that's pretty cool. Here's a pic of the new blade. I'll do the JB weld dots after sharpening. Since I was done with the 420HC blade I went ahead and popped the JB weld dots off of it to see how hard removal was...and it was cake. Good news to me since I might get sick of them on the S30v blade and it'll be nice to just pop them off. Ok, enough rambling...pic:
<a href="https://flic.kr/p/RSA8sm" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/531/32733965316_73baaf39cf_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01321 by Scooby Walker, on Flickr -
Here's the sheath itself, seems to polish up the handles every time I pull it out of the sheath!
<a href="https://flic.kr/p/RSB2hU" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/508/32734139696_4f1e1f3933_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01327 by Scooby Walker, on Flickr -
That's a nice mod you have there... how did you achieve the polished mirror finish?
Sent from my iPhone using Tapatalk
-
Thank you. I started by stripping down the Wave, to avoid getting grit into the joints, and to avoid polishing something I didn't want to polish. I started with 400 grit (dry) going against the "grain," so lengthwise from end to end. After I could see the majority of the original lines were gone, I moved to wet sanding 400 grit, using a new sheet. Everything was wet sanding from here. I stayed with 400 grit until the original lines were totally gone, and the only lines you can see were from my sanding (lengthwise). I moved onto 800 grit, then 1000, 1500, 2000, and finally 2500. I'd be sure to sand each level at least 3 times, cleaning more frequently with higher grits. Once my wife and I had agreed it was time to move onto a fine grit, I'd do another round of sanding just to make double sure it was time to move to something finer.
Once I was done with 2500 grit I was honestly happy with the results, but I went ahead and moved onto the Dremel. I used the polishing compound they provided, but I was disappointed with it scratched up the surface and I had to sand from 1000 grit again. I tried the polishing bit "520" as they call it, which is a polishing bit with compound and lubrication "impregnated" into it. This worked great. The sharper edges of the plier heads chewed up the Dremel bit a little so I just used some polishing compound and polished it by hand.
Time and patience is key.
-
@Booba5 said:
Thank you. I started by stripping down the Wave, to avoid getting grit into the joints, and to avoid polishing something I didn't want to polish. I started with 400 grit (dry) going against the "grain," so lengthwise from end to end. After I could see the majority of the original lines were gone, I moved to wet sanding 400 grit, using a new sheet. Everything was wet sanding from here. I stayed with 400 grit until the original lines were totally gone, and the only lines you can see were from my sanding (lengthwise). I moved onto 800 grit, then 1000, 1500, 2000, and finally 2500. I'd be sure to sand each level at least 3 times, cleaning more frequently with higher grits. Once my wife and I had agreed it was time to move onto a fine grit, I'd do another round of sanding just to make double sure it was time to move to something finer.Once I was done with 2500 grit I was honestly happy with the results, but I went ahead and moved onto the Dremel. I used the polishing compound they provided, but I was disappointed with it scratched up the surface and I had to sand from 1000 grit again. I tried the polishing bit "520" as they call it, which is a polishing bit with compound and lubrication "impregnated" into it. This worked great. The sharper edges of the plier heads chewed up the Dremel bit a little so I just used some polishing compound and polished it by hand.
Time and patience is key.
Thanks for the helpful tip

Sent from my iPhone using Tapatalk
-
I've been using it for a week and a half and I love it! My friend finished sharpening the knife to a mirror finish as well, so it all matches, lol. I have taken on the task (and gotten a little carried away) of grinding down the inside a bit so the plier heads don't rub, and will stay polished. This is fun. Just kidding, it's not. I finally was able to track down a 3 inch sanding pad for a die grinder at work so that moved things along a bit. I'm just about done with that task, maybe a little more grinding to do, once it doesn't rub anymore, I'm going to strip the tool down and polish up the insides to 1,000 grit. Confused? Here's some pics.
Knife edge:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01375_zpsgk88n7v8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01375_zpsgk88n7v8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>This morning I gave the pliers a quick 1,000 grit sanding to clean up the old rubbings, so I can look for new ones. Eventually it'll be polsihed up to 2,500 and polishing compound thereafter:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01363_zpsfdgwf025.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01363_zpsfdgwf025.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Here's the insides, like I said, I'll polish it up a bit when I'm done.
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01368_zpso97dfqke.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01368_zpso97dfqke.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>In this pic you can see where it's still rubbing a bit, the darker part above the medium screw driver:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01367_zpsrnk8hf8o.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01367_zpsrnk8hf8o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>As far as how I like the heads (basically) not rubbing anymore? It's awesome. The handles still move nice and tight, but the tool itself opens so much easier, and smoother. So far, it's probably the best thing I've done to my Wave.
-
While the tool will sustain some scratching with use I have found its not terrible. Sure looks awesome all shined up right? I personally didnt find it to be unwieldy in hand due to being polished either. I think polished the tool just looks more badda$$.
Great job on the Mods.
-
Agreed. It just seems like a different class of tool, lol. I think the Rebar heads are a bit thicker than the normal Wave heads, so that' probably why they were rubbing so bad. I'm 99% sure I have it ground down enough now, I have the heads painted and I'll be closing them repeatedly to see if anything is rubbing. I know there might be 2 VERY small spots. Serious about the easy of opening though. It just opens so much more fluid than before. A buddy at work (who turned me onto the Wave) has a "stock" Wave and I asked him to see it today. Talk about a difference. The Rebar, S30v, and SAK scissors aside, that thing was just a PITA to open and use, lol.
I might have more pics tomorrow, but I will for sure have some more this weekend, when I strip it completely down for a (hopefully) final cleaning and polishing.
-
Whew, what a weekend. So, I'm a bit of a perfectionist, and when I showed an engineer my Wave at work and he instantly showed me the play in the center pin (that I had never noticed, magically)...and it through me for a loop. I tried fixing it and they may or may not be locked up now. I mean I can move them, but not very easily. Long story short, I decided to go ahead and buy a Rebar and basically use it for parts if needed (and that's how it turned out). I picked it up for $40 from Walmart (friend works there, and it was a display), and tore it limb from limb.
Anyways, this meant starting from scratch on the polishing, and I had plenty of tools that I can swap around. One in particular caught my eye. The 3D screw driver. I was able to make it fit with the can opener, and moved both bit drivers to the same side. I know it's not very much as far as how many tools it has now, but it's the tools I'd use at work the most. For the record, a little side project at work is milling a 1\4 allen wrench down to fit in the bit holder. On both of the handles I was able to put a washer in between every tool, even against the body so everything moves very nicely. The polish on the pliers came out great, IMO. Better than the old set, and these are MUCH tighter. The handles got a little cleaning with some 2500 grit, but they can stand to get a little more attention. I discovered a bench grinder at work with a polishing wheel in it, so I'm going to take that thing for a spin (pun) and see what it can do with these handles before I start from 1,000 grit again.
All in all, I spent a fair percentage of the last 2 days sanding, and the end result is a multi tool that not only meets my needs, but looks AND performs like new, or even better. Here's some pics!
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01401_zpsj1wwjgbi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01401_zpsj1wwjgbi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01403_zpsks9fuezz.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01403_zpsks9fuezz.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01405_zpsis2sspws.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01405_zpsis2sspws.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Closed:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01408_zpsjmphf1jb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01408_zpsjmphf1jb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>And the shine:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01398_zps62g7lhxl.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01398_zps62g7lhxl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s50.photobucket.com/user/Booba85/media/DSC01395_zpsfhagq4be.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01395_zpsfhagq4be.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01393_zpsdueewrs0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01393_zpsdueewrs0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Really glad to see another polished Wave. We have several members now who have done it and after I first saw one here on MTO I knew I had to. I've now polished 2 new Waves and 1 old plus and Old style Surge that I gave away. It really does "dress" up the tool. With all the mods you did it really makes the Wave very personal.
Great job
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login