And so it begins.... (My adventures into Alox!)
-
Good stuff

Sent from my SM-G920R4 using Tapatalk
-
I've been trying to read thru this thread, but it is sooooo long! Good reading but alot of posts! So if this has been covered, my apologies...
Can you do a bail on the end of one of your creations?
Awesome work, by the way!
Sent from my Nexus 6 using Tapatalk
-
@Syph007 said:
Remember those 154cm blades I had made a looong time ago.. well I finally got one in a knife.I make the thick spacer out of Titanium, and yes this has a bail with tapered tips to fit in torx T9 screws. :D







Never mind my previous post, found the answer!
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1 said:
I've been trying to read thru this thread, but it is sooooo long! Good reading but alot of posts! So if this has been covered, my apologies...Can you do a bail on the end of one of your creations?
Awesome work, by the way!
Sent from my Nexus 6 using Tapatalk
I havent made a bail yet, but Im sure there is a way. I think machining one from flat Ti stock probably makes the most sense to try.
-
Finally found a guy named Steve to buy this SAK!

No corkscrew/phillips cutout on this one.





-
I saw one of your creations on eBay...Is that the normal pricing for your beauties? If so, well out of my reach! Gorgeous though!!!
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1 said:
I saw one of your creations on eBay...Is that the normal pricing for your beauties? If so, well out of my reach! Gorgeous though!!!Sent from my Nexus 6 using Tapatalk
I'd say 90% of what I do falls into the 250-350 range. Depends on what options people want, and how many SAKs it takes for donor parts.
-
Well worth the cost, the workmanship is amazing. I have certainly never regretted my purchase.
-
A bit of yeoman action today. :D




-
Finally found a guy named Steve to buy this SAK!

No corkscrew/phillips cutout on this one.





Is there an empty space on the bottom where the CS would go?
Nope I put the awl there and a fine driver on back of the opener layer.
-
Another work of art

-
That's a nice one. Take off the scissors and add a flat sd opposite the blade and it's prefect for me.
Sent from my iPhone using Tapatalk
-
I dont work on the 93mm size much any more, but here is one born today. :D




-
Really love those liners, especially the double-width one.
-
Nice!

JR -
Swiss and Canadian engineering seem to go well together.

I saw your previous replay about the scale tolls in 93 mods and that is too bad as what I would some day like to get is a bit thick as it is... And nice trick for the same in 91mm line.
And when you say you no longer work much with the 93mm line, is this because you don't like to or because there is not much interest in it? :D
-
@lister said:
Swiss and Canadian engineering seem to go well together.
I saw your previous replay about the scale tolls in 93 mods and that is too bad as what I would some day like to get is a bit thick as it is... And nice trick for the same in 91mm line.
And when you say you no longer work much with the 93mm line, is this because you don't like to or because there is not much interest in it? :D
Cost is the main reason since I dont make the backsprings any more. People always want tools added from the 91mm line and once you do that it costs more for an alox 93 than a Ti 91. And a Ti 91 is way better in quality, durability an tools per thickness.
Example to add pliers to a pioneer, 4 SAKs.
Build a Ti 91 with pliers, 1 donor SAK.The other main reason is how awful the scissors on the pioneer x are. The backwards nail nick ruins it, and the spring is so over strong if I dont weaken it when i do my pivot conversion the scissors are almost impossible to open. I first used to bend the spring but now I find it more efficient to modify the pivot end of the 93mm scissors so they have less cam action.
-
Syph, I have sent you a PM..Not heard back so wasn't sure if you were too busy or just didn't get it.
Sent from my Nexus 6 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login