First time modding
-
While the tool will sustain some scratching with use I have found its not terrible. Sure looks awesome all shined up right? I personally didnt find it to be unwieldy in hand due to being polished either. I think polished the tool just looks more badda$$.
Great job on the Mods.
-
Agreed. It just seems like a different class of tool, lol. I think the Rebar heads are a bit thicker than the normal Wave heads, so that' probably why they were rubbing so bad. I'm 99% sure I have it ground down enough now, I have the heads painted and I'll be closing them repeatedly to see if anything is rubbing. I know there might be 2 VERY small spots. Serious about the easy of opening though. It just opens so much more fluid than before. A buddy at work (who turned me onto the Wave) has a "stock" Wave and I asked him to see it today. Talk about a difference. The Rebar, S30v, and SAK scissors aside, that thing was just a PITA to open and use, lol.
I might have more pics tomorrow, but I will for sure have some more this weekend, when I strip it completely down for a (hopefully) final cleaning and polishing.
-
Whew, what a weekend. So, I'm a bit of a perfectionist, and when I showed an engineer my Wave at work and he instantly showed me the play in the center pin (that I had never noticed, magically)...and it through me for a loop. I tried fixing it and they may or may not be locked up now. I mean I can move them, but not very easily. Long story short, I decided to go ahead and buy a Rebar and basically use it for parts if needed (and that's how it turned out). I picked it up for $40 from Walmart (friend works there, and it was a display), and tore it limb from limb.
Anyways, this meant starting from scratch on the polishing, and I had plenty of tools that I can swap around. One in particular caught my eye. The 3D screw driver. I was able to make it fit with the can opener, and moved both bit drivers to the same side. I know it's not very much as far as how many tools it has now, but it's the tools I'd use at work the most. For the record, a little side project at work is milling a 1\4 allen wrench down to fit in the bit holder. On both of the handles I was able to put a washer in between every tool, even against the body so everything moves very nicely. The polish on the pliers came out great, IMO. Better than the old set, and these are MUCH tighter. The handles got a little cleaning with some 2500 grit, but they can stand to get a little more attention. I discovered a bench grinder at work with a polishing wheel in it, so I'm going to take that thing for a spin (pun) and see what it can do with these handles before I start from 1,000 grit again.
All in all, I spent a fair percentage of the last 2 days sanding, and the end result is a multi tool that not only meets my needs, but looks AND performs like new, or even better. Here's some pics!
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01401_zpsj1wwjgbi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01401_zpsj1wwjgbi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01403_zpsks9fuezz.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01403_zpsks9fuezz.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01405_zpsis2sspws.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01405_zpsis2sspws.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Closed:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01408_zpsjmphf1jb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01408_zpsjmphf1jb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>And the shine:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01398_zps62g7lhxl.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01398_zps62g7lhxl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s50.photobucket.com/user/Booba85/media/DSC01395_zpsfhagq4be.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01395_zpsfhagq4be.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01393_zpsdueewrs0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01393_zpsdueewrs0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Really glad to see another polished Wave. We have several members now who have done it and after I first saw one here on MTO I knew I had to. I've now polished 2 new Waves and 1 old plus and Old style Surge that I gave away. It really does "dress" up the tool. With all the mods you did it really makes the Wave very personal.
Great job
. -
Great polishing work!
Have you noticed any "slipperiness" when using the tools or pliers due to the smooth, polished finish?
-
Nope, not yet, at least. The side that are polished aren't really a gripping surface, so I don't think it'll be a problem. I have been paying pretty close attention to it, but I haven't really noticed anything yet.
-
I've been giving thoughts to jeweling the handles of my Reaver. Will have to see what I come up with.
-
That'd be interesting to see, for sure! How would you go about attaching them?
-
That plier head looks amazing

I like how you have rounded the wedges and smoothed the lines

-
Very nice and very shiny :o

Good job on that Wave

-
Thanks guys, I used the bench grinder (with a polishing pad) at work and it helped the heads shine a bit more, but there's still a hair line on the edge where they rub. I'll probably grind inside the body (again) some day when I'm bored at work. The handles, need to be repolished. The bench polisher helped, but it's still not as nice as the heads. This was my first time polishing metal and all, and these handles were literally the first thing I polished. I've gotten better, so I'll go ahead and repolish them, probably starting with 1,000 grit or so. Don't worry, I'm sure I'll have a bunch of pictures basically showing the same thing, but with different legos, lol.
-
@Booba5 said:
That'd be interesting to see, for sure! How would you go about attaching them?I was meaning jeweling like this.... http://www.3me.us/jewelling.htm
-
Haha, that's a relief. I was thinking, "like what, bedazzled? Whatever floats your boat." LOL. That does look awesome though, I'll have to look into it whenever I get bored with the polish.
-
My dad used to jewel bolt action rifle bolts as part of his gunsmith business. That's how I know of it.
-
I finally was able to dedicate some time to polishing, Since the initial polishing I was able to pick up a small vice, so this was quite a bit easier. I also took the chance to fill in the lettering on the ruler and the "LEATHERMAN WAVE" on each handle. I used brake caliper paint, and baked the handles in the oven at 400*f for an hour to help it withstand chemicals. I can say it withstands fingernail polish remover, I haven't tested anything else, yet. I think it came out pretty good, Here's some pics.
The LEATHERMAN isn't really all that noticeable, but the Wave is:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01456_zpsee3dblpo.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01456_zpsee3dblpo.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The numbers on the ruler came out great, though.
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01464_zps6km3w8oy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01464_zps6km3w8oy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And just because I've always wondering was a wood grain Wave would look like:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01467_zpsjrv6ksma.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01467_zpsjrv6ksma.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Since I had everything torn down I sanded all of the pivots up to 2500 grit, so they were basically a mirror finish as well. This thing is smoooooth.
-
That's amazing! :o
How long did the process take? -
Well with this go around, I just "touched up" the Rebar heads, they still rub just a little and over the last month they accumulated some marks from it. I just started at 1500 grit and worked my way up on that while the paint was drying\baking. As for the handles? Including the drying and baking time, the entire project took me about 8-9 hours start to finish. 3.5 hours of that is painting, drying time, and baking time. I wasn't really in much of a hurry to get it done so I took my time, having a 3rd party (Wife) check my progress along the way.
-
That thing is sweet :o
Any chance we can see the tools fanned out and blades open as well
:D I love how shiny it is
Reminds me of an old school LM

-
@SteveC said:
That plier head looks amazing

I like how you have rounded the wedges and smoothed the lines

I noticed this too. Impressive. I like the replaceable hard wire cutters and I like knowing that if I damage them they are replaceable. But I prefer the rounded plier heads ala the supertool and wave.
But you have made the best of both worlds imo. Bravo

-
Here yea go. I've been tossing around the idea of polishing the knife blade, but I like the S30V on it, so I might just leave it. I dunno. I have the bug to do more with it, but I've basically ran out of things to do, lol. Might be time to pick up a Surge...lol.
I couldn't really get a good pic, except for this one. Maybe when the sun is up tomorrow I can get a better pic.
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01470_zps6qgps9qg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01470_zps6qgps9qg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login