The small blade?
-
I use the main blade most of the time, but wouldn't want to miss the small one!
I keep the small one crazy sharp for emergency use. It's great for cutting small stuff and removing foreighn objects from the skinn/flesh. Like splinters.
It's also great if you don't want to scare anyone if you need to pull a blade out. -
I also use the small blade as a spare blade. I'll use it to cut in more delicate/fine applications. I wouldnt miss it tho.
-
@Aloha007 said:
I also use the small blade as a spare blade. I'll use it to cut in more delicate/fine applications. I wouldn't miss it tho.I also use it for operations that require greater control/precision and as a backup.
As far as missing it goes, I think I would, only because I count on having it there. I always carry three SAKs every day. 1) Classic SD on my key-ring, 2) Tinker in my right front pants pocket, 3) One that I constantly rotate in my left front pants pocket. I only have 15 SAKs currently (1 Classic, 3 Tinkers, 2 Spartans, Huntsman, Camper, 1 Explorer, 1 Pioneer, 1 Floral, 1 Evogrip 14, 1 Evo 63, 1 Evo 10, and 1 Traveler). In order to experiment and keep it fresh, I rotate the left one (unless I forget).
So, here's my point about the small blade: Since I always carry my Tinker and Classic, I'm always counting on the tool set they have. My subconscious mind just takes those tools for granted when looking at and evaluating any task. Since the small blade is on the Tinker, it's always in my mind as a possible option to use and rely on, so I would definitely miss it if it were not there. The variety of tools that the other SAKs have, are cool and i DO use them, but they are always like a pleasant surprise, one of those, "Oh, yeah! I have have one of those on me today!" type of things.
-
I've used the small blade as my main blade for years, saving the large blade for tasks it's better suited for.
-
While I want to see the hawkbill or sheepsfoot profile blades on more models (preferably sticking the layer that seems to be exclusive to the larger SwissChamps on more, thinner and less expensive models, but one or the other replacing the small blade on some is acceptable), I can't go without the small blade. It's what I use for most jobs. Only when it's a big job to I use the big blade--like cutting a piece of rope. I use both blades a lot, and keep both equally as sharp.
-
@cody6268 said:
While I want to see the hawkbill or sheepsfoot profile blades on more models (preferably sticking the layer that seems to be exclusive to the larger SwissChamps on more, thinner and less expensive models, but one or the other replacing the small blade on some is acceptable), I can't go without the small blade. It's what I use for most jobs. Only when it's a big job to I use the big blade--like cutting a piece of rope. I use both blades a lot, and keep both equally as sharp.Congrats on making the no life club!

You're the second one today. :ahhh Watch out for the chicken... :punishmentchicken:
-
!! -
Same as Mac404 below, for emergencies only.
-
While I want to see the hawkbill or sheepsfoot profile blades on more models (preferably sticking the layer that seems to be exclusive to the larger SwissChamps on more, thinner and less expensive models, but one or the other replacing the small blade on some is acceptable), I can't go without the small blade. It's what I use for most jobs. Only when it's a big job to I use the big blade--like cutting a piece of rope. I use both blades a lot, and keep both equally as sharp.
Congrats on making the no life club!

You're the second one today. :ahhh Watch out for the chicken... :punishmentchicken:
Okay, who's got the lard? >:D
Congrats on the NLC, Cody!

-
@Aleph78 said:
While I want to see the hawkbill or sheepsfoot profile blades on more models (preferably sticking the layer that seems to be exclusive to the larger SwissChamps on more, thinner and less expensive models, but one or the other replacing the small blade on some is acceptable), I can't go without the small blade. It's what I use for most jobs. Only when it's a big job to I use the big blade--like cutting a piece of rope. I use both blades a lot, and keep both equally as sharp.
Congrats on making the no life club!

You're the second one today. :ahhh Watch out for the chicken... :punishmentchicken:
Okay, who's got the lard? >:D
Congrats on the NLC, Cody!

+1, welcome

-
I use the small blade the most. It is particularly handy for opening cardboard boxes and cutting the flaps off of them. I save the large blade for the jobs that would require a longer blade.
I used to use the large blade the most, but I finally realized that, for most of the things I do, the small blade works great, and it does not scare people who are not used to being around knives.
-
@VICMAN said:
I use the small blade the most. It is particularly handy for opening cardboard boxes and cutting the flaps off of them. I save the large blade for the jobs that would require a longer blade.I used to use the large blade the most, but I finally realized that, for most of the things I do, the small blade works great, and it does not scare people who are not used to being around knives.
Agree. Small blade is good when you give the tool for someone else to handle also.
I also mainly use the small blade, sure the large blade is better slicer, but I rarely do that.
-
I don't use the small blade much but there are tasks that it performs better then the large. I like to keep it razor sharp for when I do use it.

-
I use it to sharpen pencils, as it's less bulky and messy than the large blade... Also, as I use it less, it's considerably sharper, which helps a lot! I also use it to cut paper sometimes, when I'm too lazy to use the scissors :P
-
@BleaKrytE said:
I use it to sharpen pencils, as it's less bulky and messy than the large blade... Also, as I use it less, it's considerably sharper, which helps a lot! I also use it to cut paper sometimes, when I'm too lazy to use the scissors :PAny knife I have with a 2nd small blade, I leave that blade clean, sharp, not used... have yet to figure out why but I do....ok to start jokes now

-
I use mine mostly to sharpen my pencils and small work, like cutting paper and stuff. The large blade I use for more "demanding" tasks, like cutting and sharpening little branches, etc.
So I use the small blade way more than the large one. Also it's less intimidating. And when the large goes dull, there's always a backup! -
@BleaKrytE said:
I use it to sharpen pencils, as it's less bulky and messy than the large blade... Also, as I use it less, it's considerably sharper, which helps a lot! I also use it to cut paper sometimes, when I'm too lazy to use the scissors :P@BleaKrytE said:
I use mine mostly to sharpen my pencils and small work, like cutting paper and stuff. The large blade I use for more "demanding" tasks, like cutting and sharpening little branches, etc.
So I use the small blade way more than the large one. Also it's less intimidating. And when the large goes dull, there's always a backup!
:D -
I use it to sharpen pencils, as it's less bulky and messy than the large blade... Also, as I use it less, it's considerably sharper, which helps a lot! I also use it to cut paper sometimes, when I'm too lazy to use the scissors :P
@BleaKrytE said:
I use mine mostly to sharpen my pencils and small work, like cutting paper and stuff. The large blade I use for more "demanding" tasks, like cutting and sharpening little branches, etc.
So I use the small blade way more than the large one. Also it's less intimidating. And when the large goes dull, there's always a backup!
:DThat moment you realize you replied twice to the same thread. Saying the same thing with different words.

Enviado do meu iPhone usando Tapatalk
-
At least his story wasn't completely different. That would be interesting...
Danielle
-
I find it interesting that some of the YouTube videos that I have watched on SAK reviews criticize the presence of two blades. My understanding is that the larger blade was used by the Swiss Army for food preparation and the smaller for utility purposes. I don't need the food preparation function since our household knives do just fine. :)
I do enjoy using the large blade for most of my utility needs. I keep the smaller blade razor sharp and use it for some specialized tasks including cutting the plastic wrapping of a dried fruit container so that the wrapping's art work in left intact on the container (takes a really sharp knife).I definitely appreciate having a really sharp small blade.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login