Opening layer/ inline Phillips mod question
-
How about a combo tool with the Inline Phillips?
Would that work? -
@4everYoung said:
How about a combo tool with the Inline Phillips?
Would that work?Combo tool is the thickness of small blade, and do you mean opposite or beside the inline philips?
-
@Pablo O'Brien said:
How about a combo tool with the Inline Phillips?
Would that work?Combo tool is the thickness of small blade, and do you mean opposite or beside the inline philips?
Opposite.
I guess I should divulge my plan. Basically I like the tool layout of the mechanic but I don't like the back side Phillips. Honestly I do t really care for back side tools anyway.
So I was wanting to mod a mechanic or deluxe tinker with inline Phillips.My ideal SAK would be 91 or 93mm main blade. Inline awl or small blade.
Pliers
Scissor(possibly but I've come to appreciate the 58mm scissors so I'm undecided on them )
Inline Phillips and inline flathead.
That would be either a 3 or 4 layer depending on scissors. -
Next question. Could I use the bottle opener on a 91mm plus a spacer on the same layer as a inline Phillips?
That would give me and inline flat driver -
@4everYoung said:
Next question. Could I use the bottle opener on a 91mm plus a spacer on the same layer as a inline Phillips?
That would give me and inline flat driverEither the combo tool or bottle opener should work.. definitely need spacers as the IL phillips is thicker... may also need to tweak a bit the spring or tool pivot... i've seen some mods similar to this... in the sak mods thread I think...
Sent from my iPhone using Tapatalk
-
One question. If you do this on 91mm, would you be fine with keeping backtools even if you won't use them? :)
If yes, that makes your 91mm plan much easier.Assuming yes, the only real tricky bit with your plan, scissors or no scissors, lies with the inline philips layer, specifically, regarding the bottle opener opposite the inline philips.
Anyone know more about this bit? The bottle opener tang is as different as can be from the magnifying glass tang, so I have doubts about it fitting.If you go with 93mm, you need a bunch of doner knives and(if including scissors) a pioneer X.
-
I'm not opposed to having backtools I just don't like to use them. So that's really a non issue for me.
As for the the 93 mm, I do have a pioneer X already.
I'm not a collector so..... it's all in the table at this point. -
@4everYoung said:
I'm not opposed to having backtools I just don't like to use them. So that's really a non issue for me.
As for the the 93 mm, I do have a pioneer X already.
I'm not a collector so..... it's all in the table at this point.So as far as I know/understand:
For 91mm, you want the bottle opener opposite the inline philips. I don't know how that would go, so better wait for someone with modding experience to explain how to do it. :)
This way would need the least amount of doner knives.If you decide to go with 93mm, the pliers will need two farmer saw springs(I think?).
Your pioneer X already has the scissors.
You can use, as jaya_man explained, two opener springs to put both the can and bottle openers opposite the inline Philips. :)
This way, you need 4 doner knives in total, less if you can get parts somewhere.
I warn you, preening alox rivets will be difficult, as I understand, and experience would be VERY useful.Whew, I think thats all my feeble knowledge can provide.

-
Well I've got a couple Swiss champs I'm watching on eBay. I figure a cheap SC will make a good knife to remove layers and not have to source pin stock.
It has everything that I'm looking for in the tool set. -
Good luck.

-
.
-
The only alternative to the mag glass that is possible is a 93mm bottle opener. But its takes significant reshaping and you have to relocate the pivot hole. If you hold that part over top of a mag glass part you can get an idea of how it needs to be shaped.
The 91mm opener doenst have enough material to reshape into a mag glass replacement.
The phillips across from dual openers is not possible on 91 due to the backsprings AND there isnt enough space the phillips would hit the openers.
-
@Syph007 said:
The only alternative to the mag glass that is possible is a 93mm bottle opener. But its takes significant reshaping and you have to relocate the pivot hole. If you hold that part over top of a mag glass part you can get an idea of how it needs to be shaped.The 91mm opener doenst have enough material to reshape into a mag glass replacement.
The phillips across from dual openers is not possible on 91 due to the backsprings AND there isnt enough space the phillips would hit the openers.
So this sounds like I'm gonna have to embrace the mag glass in order to get the Phillips.
-
The mag glass is one of those cool tools. :D
-
@Pablo O'Brien said:
The mag glass is one of those cool tools. :DWell I don't have anything against the mag glass I just doubt I would really use it. It's like the saw, or file, nice if you needed them often (which I don't). So when I do need them I will carry a tool with that load out.
I'm just trying to make an edc SAK. But looks like now the mag glass is important part of that. -
I think the answer is to go 93mm. The inline phillips fits nicely across from the openers, 93mm blade across from awl, and Pliers on saw springs
-
This is my custom by Syph with the 93mm bottle opener across from the 91mm inline phillips. It also has the 93mm awl, 93mm blade, and 91mm metal saw/file. Figure I can cut through just about anything with it. The 91mm pliers seem more like glorified tweezers than usable pliers,which is why I skipped them. I also am not a scissor user. Anyway, no keychain attachment and no backside tools. All function. Love this tool. It's got titanium scales and cost a pretty penny, but it should last a lifetime.

Good luck.
-
@4everYoung said:
Opposite.I guess I should divulge my plan. Basically I like the tool layout of the mechanic but I don't like the back side Phillips. Honestly I do t really care for back side tools anyway.
So I was wanting to mod a mechanic or deluxe tinker with inline Phillips.My ideal SAK would be 91 or 93mm main blade. Inline awl or small blade.
Pliers
Scissor(possibly but I've come to appreciate the 58mm scissors so I'm undecided on them )
Inline Phillips and inline flathead.
That would be either a 3 or 4 layer depending on scissors.Cybertool M has everything you want, and no magnifying glass. Plus more bits and a pen.


-
Opposite.
I guess I should divulge my plan. Basically I like the tool layout of the mechanic but I don't like the back side Phillips. Honestly I do t really care for back side tools anyway.
So I was wanting to mod a mechanic or deluxe tinker with inline Phillips.My ideal SAK would be 91 or 93mm main blade. Inline awl or small blade.
Pliers
Scissor(possibly but I've come to appreciate the 58mm scissors so I'm undecided on them )
Inline Phillips and inline flathead.
That would be either a 3 or 4 layer depending on scissors.Cybertool M has everything you want, and no magnifying glass. Plus more bits and a pen.


I'll have to look into this one more [emoji848][emoji848]
-
@s1xty7 said:
This is my custom by Syph with the 93mm bottle opener across from the 91mm inline phillips. It also has the 93mm awl, 93mm blade, and 91mm metal saw/file. Figure I can cut through just about anything with it. The 91mm pliers seem more like glorified tweezers than usable pliers,which is why I skipped them. I also am not a scissor user. Anyway, no keychain attachment and no backside tools. All function. Love this tool. It's got titanium scales and cost a pretty penny, but it should last a lifetime.
Good luck.
Man, that's exacly what I'm looking for. Would you mind to explain how did you manage to fit phillips and bottle opener together? What backspring did you use, do you have to grind something or it just fit?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login