Leatherman SIDEKICK / WINGMAN Owners Club
-
@LoopCutter said:
I have a Wingman clipped on my tool bag. Have had for over a year. The tools are all solid, yet the handles have the same flex as your video shows. A good tool with the scissors.
I rely on the needle nose for gripping 18 and 23 gauge wire since my fingers have trouble fitting in holding till tight on many a connector I am terminating.Sent from my iPhone using Tapatalk
I really appreciate the information, LoopCutter. My confidence in my Wingman is growing knowing that it's not detective 👍
-
It and the sidekick are good tools and priced right
Sent from my iPhone using Tapatalk
-
@LoopCutter said:
It and the sidekick are good tools and priced rightSent from my iPhone using Tapatalk
Yup, they're excellent value-for-money items and entity point into the world of Leatherman
-
In this YouTube video, the reviewer did mention about the play compared to his Wave (around the 8:00 minute timeline)
https://youtu.be/n1FDMiPPRFEAlso, got an email reply from Leatherman about the wiggle
Thanks again everyone!

-
*entry point
-
...
I know, is the acute disseminated multitools desease which makes me feel "those are all the tools you need" by now, but soon will make me feel "you need one more for this other type or situations"I'll stay in control with these three. I am quite sure I won't find in my country a good enough deal as to make me buy another one.
Stay on MTO, I am sure you cant control....

You were right.
But now I am sure, these are the ones I need. These four beautiful Multitools are all the pieces I need... I know... I am positive on this... don't need any other MT.
Há!
-
I really like how smooth my Wingman is as there is no sharp edge or corner!
Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
-
Hi guys, I'm looking for a wholesaler of Leatherman Wingman. Please send me an email to glenncanizares@gmail.com. Thanks.....
-
@an0nemus said:
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
-
I'm weak, i know. I finally bought one wingman.
I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
-
I really like how smooth my Wingman is as there is no sharp edge or corner!
Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
-
-
I really like how smooth my Wingman is as there is no sharp edge or corner!
Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc. -
I really like how smooth my Wingman is as there is no sharp edge or corner!
Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoldberg. I'm now fully convinced
-
@hellsing said:
I'm weak, i know. I finally bought one wingman.I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
I do not think you will. I have a Rebar, ST300 and Wave, as well the Sidekick and Wingman.
My Wingman rides in side pocket of tool grip and ready full time. The others ride in sheaths and not always with me daily.Sent from my iPhone using Tapatalk
-
[quote author=an0nemus link=topic=32239.msg1434883#msg1434883 date=1488633215]
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoldberg. I'm now fully convinced
[/quote]Nano oil and 3 in 1 machine oil don't smell nearly as bad as engine oil and wd40 - something to consider if you work inside or around other people.
-
Wipe down the tools and apply to pivot points. The outer surfaces of handles not so much.
A slippery tool can be a dangerous tool, or accident about to occur.Another low order option is mineral oil, I use to wipe down higher carbon type tools, not always my SS leather mans that frequently unless nothing else is handy on job site.
Mineral oil also works good on my cutting boards, drives my wife nuts, thinking I used a gun oil on her meal prep accessories, [emoji6]
Sent from my iPhone using Tapatalk
-
@hellsing said:
I'm weak, i know. I finally bought one wingman.I know i will be disappointed compared to my wave, surge st300, cs4 etc, but you know, it's MTO!
As the others have said; give the Wingman a fair chance, you might be pleasantly surprised. It will likely feel "different" to your other LM, but I still like my Sidekick very much.
-
[quote author=SurivStud link=topic=32239.msg1436268#msg1436268 date=1488853566]
[quote author=an0nemus link=topic=32239.msg1434883#msg1434883 date=1488633215]
I really like how smooth my Wingman is as there is no sharp edge or corner!Question: do you lubricate your Leatherman? I read somewhere someone saying WD40 is not advisable, and better use silicon oil. What's a silicon oil?
Actually, The manufacturer suggests to use a water displacing product such as WD40 at their maintenance tips page:
"After cleaning, re-oil pivoting areas with a light machine or penetrating type oil (such as WD-40)"
And"After cleaning, dry your Leatherman and apply a light machine oil or a water-displacing product (WD-40[emoji768]) "
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
I would use just that.
Thank you so much for this, SurivStud! Very helpful!
I'm curious to know how are the users' experiences of using WD40 on their Wingmans.
Anyone?
I use wd40 on work duty leathermans.
These tools get wet and dirty daily.
At the end of the week they get washed off, spayed with wd40 and thrown back in the tool bucket.My edc leathermans get whatever is handy.
Engine oil, nano oil, 3 in 1 machine oil etc etc.Thanks zoidberg. I'm now fully convinced
[/quote]Nano oil and 3 in 1 machine oil don't smell nearly as bad as engine oil and wd40 - something to consider if you work inside or around other people.
[/quote]
thanks, zoidberg.any idea what a silicon oil is? have you used one?
-
@LoopCutter said:
Wipe down the tools and apply to pivot points. The outer surfaces of handles not so much.
A slippery tool can be a dangerous tool, or accident about to occur.Another low order option is mineral oil, I use to wipe down higher carbon type tools, not always my SS leather mans that frequently unless nothing else is handy on job site.
Mineral oil also works good on my cutting boards, drives my wife nuts, thinking I used a gun oil on her meal prep accessories, [emoji6]
Sent from my iPhone using Tapatalk
Ah, wife uses virgin coconut oil for cooking, I just might try that one out also! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login