Parts for Upgrade/Repair Leatherman multitools
-
Would one of the bit holders fit my Crunch?
What's wrong with the standard 1/4" hex bit driver already in your Crunch ? (take out the tension adjusting screw and you'll see it) ???
It's more a case of swapping out what I don't need - the blade - for something more useful to me. I was hoping to be able to fit a bit that would take 1/4 drive sockets.
-
Would one of the bit holders fit my Crunch?
What's wrong with the standard 1/4" hex bit driver already in your Crunch ? (take out the tension adjusting screw and you'll see it) ???
It's more a case of swapping out what I don't need - the blade - for something more useful to me. ** I was hoping to be able to fit a bit that would take 1/4 drive sockets.**
You mean like the SOG one that fits diagonally into 1/4" square female sockets ?
https://www.sogknives.com/1-4-driver.html
/topic/39195All the bit holders I've seen are much thicker than the Crunch blade, so even if the tang fits (or can be made to fit) you would have to sacrifice other tool components to make room.
/post/601722There are adaptors that will do that for your Crunch: 1/4" hex male to 1/4" square male
-
You're right. I'm trying to reinvent the wheel, aren't I!
-
Hi,
I would like to order 2 X LM wrenches please.
-
I would like to order a set of 2 lite wrenches if you still sell them. Thanks.

-
@JustinCase said:
I would like to order a set of 2 lite wrenches if you still sell them. Thanks.

I replied to to your pm and payment sent for Set#10 (Two (2) lite Leatherman wrenches) - $19 with shipping

-
Is the Surge "small bits holder" needed for the micro/eyeglasses bit you've sent me?
If so, I should have ordered one of those as well!
Thanks,
Chris -
I received the parts I wanted from Loki in an acceptable time.The parts are top notch!
My Charge's Torx bolts are 5 points instead of 6 point, and Loki sent 6 point bits. I am assuming that 6 points are normal, right?
Is there something wrong with my Charge? -
@AlphaTea said:
I received the parts I wanted from Loki in an acceptable time.The parts are top notch!
My Charge's Torx bolts are 5 points instead of 6 point, and Loki sent 6 point bits. I am assuming that 6 points are normal, right?
Is there something wrong with my Charge?Yeah mate, 6 is the new 5.
Nothing wrong with your Charge.
Unfortunately you weren't aware of the two types when you ordered.@loki-mobile said:
All sets availableSet1 - Two LM Wrench - $25 (With WW Shipping)
Set2 - Two LM Wrench + Two 6-star bits (TT10) - $31 (With WW Shipping)
Set3 - Two LM Wrench + Two 5-star bits (TS10) - $34 (With WW Shipping)
Set4 - Two LM Wrench + Two 6-star bits (TT10) + Two 5-star bits (TS10)- $37 (With WW Shipping)
Set5 - Two 6-star bits (TT10) - $11 (With WW Shipping)
Set6 - Two 5-star bits (TS10) - $14 (With WW Shipping)
Set7 - Two 6-star bits (TT10) + Two 5-star bits (TS10) - $19 (With WW Shipping)
Set8 - One Gerber Wrench - $13 (With WW Shipping) (To disassemble the Gerber multitool quite a one wrench.)
Set9 - Two Gerber Wrench - $18 (With WW Shipping)
Set10 - Two LM Lite Wrench - $19 (With WW Shipping) -
I received the parts I wanted from Loki in an acceptable time.The parts are top notch!
My Charge's Torx bolts are 5 points instead of 6 point, and Loki sent 6 point bits. I am assuming that 6 points are normal, right?
Is there something wrong with my Charge?You can get them here
.....or here if you want two five points screwdrivers :whistle:
-
I got them both...

I had no idea there was such a thing as a 5 Point Star pentalobe torx Security Bit until i started trying to get the 6 point in the hole. -
I have a new model surge that I want to get rid of the bottle opener. What would it be a straight swap with?
Ideally I'd want the small bit holder that the old model surge had. Is that a straight swap for the bottle opener and awl if I move one of the flatheads to the other side?Also is there an elegant way of swapping the plain edge blade out with another saw holder or a file?
Thanks!
-
Do you still have Skeletool/Freestyle (154CM) - $21? I have been trying to contact Texas Tool and no response for 2 weeks, e-mail or phone. I originally wanted a Damascus blade. You would be welcome to my dual edge blade from my Skeletool.
-
@MusicMen said:
Do you still have Skeletool/Freestyle (154CM) - $21? I have been trying to contact Texas Tool and no response for 2 weeks, e-mail or phone. I originally wanted a Damascus blade. You would be welcome to my dual edge blade from my Skeletool.Knives Skeletool 154CM are not available now. Will be in late March.
-
Hi,
So I've found that the surge small bit holder is indeed a straight swap for the bottle opener
so i'll be having one of those, it includes the small bit right?
I'll also take a surge saw holder, and the surge file if you have oneDoes the diamond file from the wave have the same pivot diameter as the blade of the surge? if it is i'd be interested in one
-
@hugburger said:
I have a new model surge that I want to get rid of the bottle opener. What would it be a straight swap with?
Ideally I'd want the small bit holder that the old model surge had. Is that a straight swap for the bottle opener and awl if I move one of the flatheads to the other side?Also is there an elegant way of swapping the plain edge blade out with another saw holder or a file?
Thanks!
@hugburger said:
Hi,So I've found that the surge small bit holder is indeed a straight swap for the bottle opener
so i'll be having one of those, it includes the small bit right?
I'll also take a surge saw holder, and the surge file if you have oneDoes the diamond file from the wave have the same pivot diameter as the blade of the surge? if it is i'd be interested in one
The sm bit driver isn't a straight swap sorry.
Nor is the t shank holder for a blade.
The diamond file has the same pivot but the outside profile is different.
All your ideas can happen, they'll just need a little work.
I recommend asking your questions in either the leatherman or modding sub sections. -
@hugburger said:
Hi,So I've found that the surge small bit holder is indeed a straight swap for the bottle opener
so i'll be having one of those, it includes the small bit right?
I'll also take a surge saw holder, and the surge file if you have oneDoes the diamond file from the wave have the same pivot diameter as the blade of the surge? if it is i'd be interested in one
Small bit holder w/o small bit
Diameters of the axes of the pliers wave and surge are the same, but you will not put the file in place of a knife without modifications
-
Hello Loki, do you still have S30v blades for a Charge? Thanks
Sent from my iPad using Tapatalk Pro
-
Hi Loki,
I have recently found your posts and am very excited at the prospect of modifying my leatherman!
I would like the parts listed below.
Could you please PM me with a quote for these items shipped to the UK?Many thanks

2x Kick/Blast/Rebar disassemble tool sets
2x Kick pocket clips
1x Suge saw/file holders
1x Surge awl
3x Wave big bit holder (with bits)
2x Wave scissors
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login