Electricians Multitool?
-
A Wave will suit your needs.
I carried my Charge before grabbing my Rebar (which is nice but not quite the same)Bit holder.
saw for cutting wooden and plaster panels for installing switches and outlets in them.
wire cutters in pliers.
Pliers for grabbing wires in holes, bending full core wire.
Serrated blade for cutting in electrical tube before breaking it.
Same blade for cutting flexible tubes.
Plain edge for cutting in electrical wire for stripping them.
File for cleaning oxidisation from contacts/wire.And so on...
-
Gerber MP1 is the best I know because the great off side cutters and bit driver. Also easy to use with one hand because the pliers are spring loaded.
-
I'm an electrician by trade( though for the foreseeable future I've hung up my tool belt.) and I would recommend carrying a multitool as a backup, not a main tool. You are going to have you main tools in your immediate area and should reach for them and become familiar with them as much as you can. The multitool should be used as backup for saving a trip off the ladder. Say you left your driver at the last junction box and just need to finish up before moving on. Use the multitool to save an extra trip. But don't rely in it as your primary means.
But I'd suggest a OHO tool or one with outside accessible tools. Sometimes a free hand is hard to come by.
Just my .02 worth.
And I'll through in another vote for Klein tools. They are great quality.
For a good multitool look into a quality multivitamin driver. Knipex pliers are some of my favorites. Find a good comfortable pair of strippers. (Not the two legged type). Fluke makes excellent electrical testing equipment.When I went through my apprenticeship I was given the tools I had to use. While they worked they were not my favorites. And after I was let loose I developed my own tool bag tailored to my tastes.
Hope that helps. -
The Gerber Groundbreaker is an outstanding tool for electricians. All the other suggestion are good as well.

</post/707529>
-
There are some great suggestions here, love the look of those pliers T14

Matt, I would sugest getting dedecated tools for work
Maybe carry a multitool just in case but I think you will be carrying enough stuff about with you that you won't want the multitool (depending on what work you are doing)
I also think that you should start work before you start buying any tools, (unless the boss has said different)
see what the Guys you work with use everyday, have a chat with them about the tools they use,
If you can try to talk to more than one person as we all have different ideas/favourites
Good luck Mate

-
Thanks for the suggestions from you all and im now debatong on a Leatherman Super Tool 300 or a Wave!
-
@matty78943 said:
Thanks for the suggestions from you all and im now debatong on a Leatherman Super Tool 300 or a Wave!Yeah ST300 all the way. Heavier duty and much easier to clean. Have had one with my dedicated work tools for years now.
-
you definently need a set of dedicated tools that are insulated, use the MT as backup or when you are 100% sure the wires are not live, so you dont get zapped or short circuit low voltage controls with bare metal of the MT. The klein stippers and pliers are really good. would recommend a MT with scissors, crimper, strong knife.
-
I will add that neither the SAK or Leatherman are great options for stripping wires, cutting, Leathermans are fine. In a bind it'd work, but so would any knife and your teeth..
-
@Blackbeard said:
you definently need a set of dedicated tools that are insulated, use the MT as backup or when you are 100% sure the wires are not live, so you dont get zapped or short circuit low voltage controls with bare metal of the MT. The klein stippers and pliers are really good. would recommend a MT with scissors, crimper, strong knife.Blackbeard has made a very good point and to meet those requirements in a multitool I would suggest the SOG Powerlock tools as they are similar to the Supertool 300 but they have compound leverage pliers with hard wire cutter, an excellent crimper, and scissors. Here they run about $70 but I don't know what you would have to pay in England.
-
-
One last add though:
I NEVER strip wires using a knife or stripping pliers...Always use cutting pliers to cut in the cable from 4-5 sides and pull hard.
Wire: pinch down a little and pull.Takes some practice, but haven't hit copper the last 3 years...
-
@Mechanickal said:
One last add though:
I NEVER strip wires using a knife or stripping pliers...Always use cutting pliers to cut in the cable from 4-5 sides and pull hard.
Wire: pinch down a little and pull.Takes some practice, but haven't hit copper the last 3 years...
Only works when the cutting pliers are sharp. :P
Sounds like a good technique!
-
@Mechanickal said:
One last add though:
I NEVER strip wires using a knife or stripping pliers...Always use cutting pliers to cut in the cable from 4-5 sides and pull hard.
Wire: pinch down a little and pull.Takes some practice, but haven't hit copper the last 3 years...
Tis how I have always preped my larger wires. The smaller wires, 20 gauge & smaller, I use a wire stripper.
-
I used a nice pair of Klein linesman pliers, knipex everything else and my wave for years as a backup as to not come down off a lift for a random number 2 screwdriver,
Multis are handy but are no substitute for a good bag of electrician tools. Try doing 30 plus quad boxes with a Leatherman. The pain!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login