BuckTool collectors unite.
-
Thanks enki_ck
I will do that so the pictures can be put in the proper place. I still am unsure what happened to my PhotoBucket account.gregozedobe
What is the difference(s) between the 360WM and the 360FL with 5 notches
The 360WM Workman/Harley Davidson have 5 wire strippers. The 360FL has 1 wire stripper. The list below is off on that point, I need to be careful when I copy and paste.Is your 360BK black oxide(BO) or Diamond-Like Coating(DLC) ? Mine definitely feels more like DLC than BO
The 360BK is listed as having Black Oxide coating. I think with handling it may get polished some to give it a smoother appearance. I have Buck knives with DLC and it is definitely a higher gloss finish than my 360BKDo you class the First Production Run (FPR) 360 and 355 as regular production tools ? I sort of think they are
Buck made a numbered run of 400 FPR 360's and 300 FPR numbered 355's that were engraved as such. These were done for the BCCI (Buck Collectors Club)Can you post a picture of your 360BK so I can see the finish?
-
I just found my old buck tool in a box of winter stuff I drug out.
It's got a broken plane blade.
I'd like to get it fixed but I doubt buck will still have parts.
-
bumpity bump.. :D
2 for $10..i couldn't pass up. Buck Model 355 and 360. They appeared to be coated in cosmoline when i bought them. I'm still in the clean up phase of the tools but thought i'd share. No rust, tools looks to be in good shape. I found these on the app site Letgo. I recommend it for finding cheap multis and knives. I'm gonna let these soak for a bit in Pacu's secret cosmoline remover followed by tool lube for a couple days and go after them with a nylon brush/ pipe cleaners.
-
Nice score.. :ahhh

-
I just won an unusual Buck 360 on ebay. I bought it because it has a nail nick on the serrated blade (this was usually only on the LL Bean version), but the combo blade has the nail slot (as per later production 360's). Seeing as these MTs have rivets, not screws I'm guessing this was made after the LL Bean run was finished, but the factory still had some serrated blades with nail nicks left over, so in the spirit of "waste not, want not" they used them up with regular slotted combo blades.
I had a bit of competition for this one, presumably from a fellow Buck collector, and I was wondering if it was anyone on here ? (no hard feelings over the price I paid, just curious)
-
gregozedobe
Glad to see you out bid me on that. ;) I was hoping who ever won it had an idea what they were getting. I think your evaluation is correct on the way it was made. The only other idea was it may have been sent back for warranty work. What ever the case, if you ever want to part with it let me know. Again nice score and please post pictures here when you get it.

-
Ok, I have a few of these BuckTools and have always wondered the purpose behind a 1/3 Serrated Blade paired with a fully serrated blade. Any thoughts?
-
@pa_strunk said:
Ok, I have a few of these BuckTools and have always wondered the purpose behind a 1/3 Serrated Blade paired with a fully serrated blade. Any thoughts?I could never figure that out myself. Maybe the designer had a surplus of combo blades to be used up, and they never got around to changing the design ?
-
I just added a Buck Minitool 350 to my collection. Much smaller than I expected. I'm disappointed because it is extremely loose, so it isn't a very good pocket tool. On the other hand I am impressed with the quality of this diminutive multi tool.
-
Got me a BuckTool now and I really like it. Unfortunately it would not suit my personal work needs, so it will be a shelf queen. It is nearly perfect, with just a 1/64th" bit of pitting inside a handle. Tools are unused and the tool is tight. Blades are untouched and razor sharp. It has the two three sided phillips. Tools are well made and the non clumping is awesome with the locking system and half stops.
This is a tool every MT collector should have at least one of..IMO. After seeing the smallish size of this 360, I will stick with it being my only BuckTool though(I like mid size and HD MTs the best). The 350 & 355 must be tiny, huh? They cost more than the 360 too(I paid $33 for my 360)! :o
-
The 355 isn't a great deal smaller than the 360, but as Yadda says the 350 is very, very small (and way too many of them have loose plier/handle pivots - it must be a design flaw).
-
The rivets can be crushed in a press to fix that, but only if someone is actually going to use their tool. It will cause a cosmetic issue, though acceptable and small, to press the rivets tighter.
I use the press at work to tighten plier heads at work when they get loose and the cutters fail. A minor blemish is a small price for a daily user tool to function well.
-
What do you guys think about a badge for BuckTool enthusiats?

-
My Buck family pics.
-
I love the BuckTools - but not so easy to find in Germany...
-
Does anyone have an idea about the dots on the pliers where the plierstop springs go into? (second pic)
One side has four dots, the other has five, in the arrangement of dice sides.


-
ReamerPunch nice BuckTool. It is nice you have a box and paper work. Would you mind posting a picture of the open tool so I can tell what variation you have.
I find it interesting how after many years of collecting BuckTools, you discover something I have never noticed before. I looked at my BuckTools and found 1, 2,3,4,5 and 6 dot tools. My first guess is a date code, as the evolution of the tool seems to coincide with the number of dots. The number of dots differ on all tools I have from one side of the head to the other. Like 2 dots one side the other 3 dots. So this may have aided in assembly. I will be in contact with Buck to see if any one can give me an answer. I will try this weekend to post pictures of the dot variation I have.
-
Hey Longbow,
I don't know if this is helpful or not, but my 360 doesn't have any dots.
Pics with 355 and 350. And 360 & 355 with tools out.On a side note: finally have one of each.

Nice find on the NIB BuckTool, Reamerpunch!




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



