Restoring Swisstool help
-
Sending a Swisstool back to Vic will set you back a max of €12 ($15) over here in Europe if it's outside of the waranty.
€5 on a small SAK and about €10 on a large SAK.
(Posted this somewhere here before)I've send in a malicious used and "sharpened" Spartan in that I bought for a few Euro, 5 euro to Vic and it was as good as new.
-
Send it back to Victorinox, I did once and they changed almost everything.
I only pay for the shipping.
Good service. -
Other than the serrations within the gripping area of the pliers............ I'd say its serviceable. It also goes to show these tools can take a beating and come out usable.
-
It looks like that Spirit took a beating getting used on machinery? How are the locks holding up?
still waiting for Victorinox's reply
Locks are as good as new!
I'm terribly sorry for the late reply! :-[
Thank you for the info. The locks are the only potentially weak spot I see on the Spirit, it's good to know they're holding up well after some heavy use!
Did you hear from Victorinox?
-
I agree it's good to see a tool so throughly used! I think victorinox would like to get it back and put in some kind of display.
Can't wait to hear what they said.
-
their reply three days ago was very polite and well written, but not what I expected. They told me that I had to send them the tool (shipping costs at my expense of course) and they'd send it to Vic's Maintenance dept (since they weren't able to solve the issue by themselves or by their means) and *then * I'd be given an estimated cost for the repair.
Obviously I said no thanks and will keep the tool as is.
Too much time and hassle, and $, for a tool that's still in working condition!
-
@ThePeacent said:
their reply three days ago was very polite and well written, but not what I expected. They told me that I had to send them the tool (shipping costs at my expense of course) and they'd send it to Vic's Maintenance dept (since they weren't able to solve the issue by themselves or by their means) and *then * I'd be given an estimated cost for the repair.Obviously I said no thanks and will keep the tool as is.
Too much time and hassle, and $, for a tool that's still in working condition!
That's what they told me on a raped Spartan, paid €5 postage in the end...
Verstuurd vanaf mijn SM-G388F met Tapatalk
-
If it were me I would take the chance... I am guessing you could say no if you thought it would cost to much to fix.

-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
@zoidberg said:
Nothing a quick grinding, sanding and sharpen won't fix.Loose handles?

-
@firiki said:
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

Hammer.
-
@firiki said:
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

15€ minimum they told me yesterday, add to that the shipping costs, waiting time...
Handles do wiggle and dance around a bit, misaligned plier jaws (1-2 mm) and general rattling sounds and loose feeling.But I'll live with that :ahhh
-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

15€ minimum they told me yesterday, add to that the shipping costs, waiting time...
Handles do wiggle and dance around a bit, misaligned plier jaws (1-2 mm) and general rattling sounds and loose feeling.But I'll live with that :ahhh
I never send it to Vic myself.
I hand it in at a retailer, who sends it back with it's suplier.
Takes longer, but no shipping cost, just the "maintenance cost". -
@Mechanickal said:
I never send it to Vic myself.
I hand it in at a retailer, who sends it back with it's suplier.
Takes longer, but no shipping cost, just the "maintenance cost".I've only sent in a SAK once, through the distrubutor chain. I paid them €5 however.
The crazy part is it took three months for it to get back and it still had the same issue, main blade hitting the spacer! I was kind of surprised. I know it was opened because they had replaced a damaged liner. Some sharpening later and no more hitting the liner >:D

-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

15€ minimum they told me yesterday, add to that the shipping costs, waiting time...
Handles do wiggle and dance around a bit, misaligned plier jaws (1-2 mm) and general rattling sounds and loose feeling.But I'll live with that :ahhh
So, this one is going to become your bitter Spirit?
I'll see my way out :D
-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

Hammer.
Was that a noun or a verb
:PObviously, that would be the first choice. Having noticed some lateral play on my Spirit I wondered what happens if I tighen it up too much through this delicate procedure. I guess breaking it loose again through use is the answer.
-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
Nothing a quick grinding, sanding and sharpen won't fix.
Loose handles?

Hammer.
Was that a noun or a verb
:PObviously, that would be the first choice. Having noticed some lateral play on my Spirit I wondered what happens if I tighen it up too much through this delicate procedure. I guess breaking it loose again through use is the answer.
Yeah use a lightweight hammer, lots of little taps, checking often.
-
I think there's a minimum charge for repair jobs on Swisstools, €12 if I remember correctly?
So that Spirit is still useable? I get the impression the pliers teeth are quite worn. What about the wiggle, is it worse than on the Swisstools?
[quote author=zoidberg link=topic=70871.msg1431591#msg1431591 date=1488003857]
Nothing a quick grinding, sanding and sharpen won't fix.Loose handles?

Hammer.
Was that a noun or a verb
:PObviously, that would be the first choice. Having noticed some lateral play on my Spirit I wondered what happens if I tighen it up too much through this delicate procedure. I guess breaking it loose again through use is the answer.
Yeah use a lightweight hammer, lots of little taps, checking often.
[/quote]

-
@ThePeacent said:
their reply three days ago was very polite and well written, but not what I expected. They told me that I had to send them the tool (shipping costs at my expense of course) and they'd send it to Vic's Maintenance dept (since they weren't able to solve the issue by themselves or by their means) and *then * I'd be given an estimated cost for the repair.Obviously I said no thanks and will keep the tool as is.
Too much time and hassle, and $, for a tool that's still in working condition!
I have an original Swisstool that got a little play in the blades, so I put it in a vise and squeezed it in the area of the rivets a little at a time and kept checking it until it was just right and it works fine now. I put some cloth around it so the vise would not scratch the rivets. You might give it a try.
-
I need to get me a vise at some point...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login