My take on EDC (by lister)
-
-
And this is my current basic (basic as in the stuff in my pants pockets). The image is not the best as it was taken by my phone, but that is all the photographic equipment I have...

Anyway, I simplified my system a bit.
The keychain is still hangs from my belt loop, tucked in my left pocket, but I removed the sheat, and some tools. The flashlight got a sheath (variation on the theme of my hooded sheath from my early days on this forum) and a clip so I can carry it clipped on the back of my left pocket.
The LM mini tool and the lighter reside in my coin pocket. I lost the denim superglued cap I used to heave on my lighter somewhere in France...
The SAK is new. It is the fieldmaster with the plus scales. I exchanged the pin for a bit bigger sewing needle with a piece of string tied trough the eye so I can get it out of the slot. And as mentioned earlier I keep a small sewing needle with a length of a thread under the hook. I carry the sak cliped to the back of my right pocket. The front is reserved for my phone.
The shortened and fake pocket wrench is normally in my left back pocket.
I still haven't gotten around to making a better sewing kit. The old one is on the keychain tucked in the black web tube held in by a chinese finger trap effect. And that's all for now.


-
I am quite sure that most of us EDC/cellphones. In fact these gadgets are so omnipresent that most of us don't bother including them in our EDC threads. Besides what are those of us that don't own a camera supposed to use to take pictures of the EDC if our smartphone is part of the lineup? :ahhh
But as it happens I use two phones, the main smartphone and another cheaper cell phone for when I want to go light or don't want to damage the expensive smartphone. I carry the one you can see in the attached picture (sak included for scale, picture taken with my cellphone). I hear that it is quite popular with certain population with limited mobility in the UK and that they tend to be somewhat anal retentive about them...

-
To continue my monologue:
This is the wallet part of my edc, from left to right, top to bottom:
-
I used to carry folded plastic bag for storing my smartphone in case of sky-sent-precipitation, but I upgraded it to a 1l whirlpool plastic bag intended for collecting laboratory samples. At least I think this is what it is, I actually bought it on Ebay form a guy that was selling it to survival kit builders. That was the only sane option, the other one being a 500 pc pack of them... ::)
-
Two aspirins. I wish they would be available in slimmer form for wallet carry...

-Wallet mirror, not to keep myself looking good, as there is not much chance of that, but it helps me with my contact lenses from time to time. I never could get them in and out of my eyes without a mirror.
-
A Fresnel lens, a piece of polarizing filter, and a piece of foil for magnetic field viewing I picked up while still in the university. The firs item gets some action, the second and the third not so much... :ahhh
-
I think that about 20 meters of kevlar thread.
-
Some first aid items, iodine disinfection pads, some waterproof plasters, and forehead liquid crystal thermometer.
The green piece of spandex is a pouch everything in this picture, except for the plastic bag, resides in while not in use.

-
-
Not strictly EDC, but does anyone else thinks this also applies to the field of EDC:
https://en.wikipedia.org/wiki/Feature_creep


-
-
-
-
-
I bought myself a new watch. It's vostok amphibia. It is a fun cheap watch from Russia.
While it is by no means fancy, it has a few nice technological tricks for circumventing the weaknesses of it's materials and price point. It uses acrylic glass in the shape of a dome, so that the water pressure deforms it, and pushes it tighter in to the edges of the case to make a tighter waterproof seal. The back is not mad of one piece but is actually a kind of a cover held in place by another screw on ring. This is to enable the cover to pres more tightly to the sintered rubber to again seal the watch tighter as you dive lower and the water pressure increases. All this makes the watch water resistant to 200 m. It also has a crown connected to the watch mechanism via a clutch. The clutch engages when you pull the crown far enough out, all this is supposed to make the watch more resistant to shocks, as they are not directly transmitted to the watch stem.
It cost around 60 €.
Of course, if you are not familiar with this watch, don't trust my information, as I am not a watch expert. And anyways there is a lot of reviews on the internet.


-
-
-
Hm, since necromancy seems to back in vogue I'll do some myself. Granted it this is not one of the threads of historic importance and/or one of the really interesting ones, such as those that get necromanced by the boss but still. I really don't want to start a new one.

Anyway this is my minimalistic edc I use in summer when clothes do not permit my usual EDC extravagance:

-
-
-
look good, love the variety of clip styles and shapes, you're the clip/hanger man!

and the gear is great of course
Minimal size but very capable!

-
-
-
-
I mentioned what it was in the first draft of the post, which my smartphone decided to delete when I tried posting.
It's a hot air soldering station (ok, maybe not a station, whatever you want to call it...). Yes, I used it to form the kydex sheat around the objects. I didn't go the usual route of using a press. First of all, I don't have one. And thus geometry of this would be hard to achieve using a press...
Anyway, I am quite pleased for this being my first go...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






