What did you just get?
-
Mail call!!

-
Nice boxes :D congrats

-
@gdoolittle said:
Mail call!!
Tease !


3 Tinkers and 1 Classic SD
2 Tinkers for the collection drawer, 1 for carry


My new carry combo

-
Very
!Nice EDC combo!

-
USPS Tracking shows my Leatherman warranty return "Out for delivery"
Excited to find out what I get when I get home from work. I sent in a Kick with a very worn blade, it probably could just be sharpened and be "fixed", and a PST with blade tip broken off and general use and rust. Best case (for me), I get a Rebar and the Kick back. Worst case, I get two Rev/Wingman/Sidekicks.
-
Got me a few models to work on, also got my strip lights in order to make the lamp..
JR -
A mama bear for my cubs.

-
Here's what the led lights turned into..
JR -
@MadPlumbarian said:
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
-
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JR -
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy? -
My first fancy torch.

-
@kkokkolis said:
My first fancy torch.Congrats!!! Welcome to the world of expensive flashlights

-
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
-
@gdoolittle said:
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR -
@gdoolittle said:
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D -
@gdoolittle said:
[quote author=MadPlumbarian link=topic=50835.msg1458670#msg1458670 date=1492145546]
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D
[/quote]
Like I said, it ain't fancy, but it works. Here's an up close pic to give a little more detail.
JR -
@gdoolittle said:
[quote author=Mechanickal link=topic=50835.msg1458696#msg1458696 date=1492154835]
[quote author=MadPlumbarian link=topic=50835.msg1458670#msg1458670 date=1492145546]
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D
[/quote]
Like I said, it ain't fancy, but it works. Here's an up close pic to give a little more detail.
JR
[/quote]
Now you're just showing off

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


