What did you just get?
-
@gdoolittle said:
[quote author=MadPlumbarian link=topic=50835.msg1458670#msg1458670 date=1492145546]
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D
[/quote]
Like I said, it ain't fancy, but it works. Here's an up close pic to give a little more detail.
JR -
@gdoolittle said:
[quote author=Mechanickal link=topic=50835.msg1458696#msg1458696 date=1492154835]
[quote author=MadPlumbarian link=topic=50835.msg1458670#msg1458670 date=1492145546]
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D
[/quote]
Like I said, it ain't fancy, but it works. Here's an up close pic to give a little more detail.
JR
[/quote]
Now you're just showing off

-
[quote author=gdoolittle link=topic=50835.msg1458746#msg1458746 date=1492164499]
[quote author=Mechanickal link=topic=50835.msg1458696#msg1458696 date=1492154835]
[quote author=MadPlumbarian link=topic=50835.msg1458670#msg1458670 date=1492145546]
[quote author=Monrogue link=topic=50835.msg1458653#msg1458653 date=1492140563]
[quote author=MadPlumbarian link=topic=50835.msg1458647#msg1458647 date=1492140056]
Here's what the led lights turned into..
JRCool idea

Sent from my SM-G920R4 using Tapatalk
Ty, I love it, I can't wait to hook it up to the workstation!
JRThat came out great!
What did you use to make the arch eventualy?Looks great!!
[/quote]
Lol, your going to laugh,
The wife and I were out and stopped in at a store and I kept thinking metal right? So what's cheap, metal, long enough, and just about every store has? I mean I would have got the aluminum flat stock if I could have got to Lowe's or Home Depot. So what did I use? A pair of adjustable curtain rails, all for $5
I adjusted them, used a piece of playground equipment to bend them, then used the farmer sak's awl to punch holes in them and a couple pieces of plastic to rivet them into a larger width.. and not only did two but three arches of the led lights.
I have a new workbench coming today, so I still have to get that together, before I can try the light out, so maybe I'll post a pic later,, but here's what I used.
JR
[/quote]
I'm not laughing...
I'm genuinly impressed. Realy, great work
Your improvisation is exactly the mindset that multitool and SAK weilders need :D
[/quote]
Like I said, it ain't fancy, but it works. Here's an up close pic to give a little more detail.
JR
[/quote]
Now you're just showing off

[/quote]
Of course, lol
JR -
Not a tool or sak, but still an edc, but there's nothing like new socks!
JR -
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JR -
A good Friday for me as a OG Wave and a large-font PST showed up. Both look minty.
-
While waiting for my Grappler to get here I found a Crunch on ebay to good to pass up. I haven't deceided if I like it or not.

-
@MadPlumbarian said:
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.
-
😆
-
I got groceries today. That counts as EDC right? Every Day Consumables.
-
A NuMax air nailer kit with three guns the bag, nails oil, and glasses. 2- 36 inch HD/Jorgensen wood clamps and a a slightly bent 30 inch Great Neck prybar.
-
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.

I know it looks a little funky but for $20 and the way it makes everything so detailed to see, it's well worth it..
JR -
@Bensasupertool said:
I got groceries today. That counts as EDC right? Every Day Consumables.Ditto, we just got freaking home about an hour ago, it was nuts!
JR -
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.

I know it looks a little funky but for $20 and the way it makes everything so detailed to see, it's well worth it..
JRGreat pic

-
I got groceries today. That counts as EDC right? Every Day Consumables.
Ditto, we just got freaking home about an hour ago, it was nuts!
JRI loathe the market/shopping excursion. Except the cereal aisle. My boy loves cereal aisle and that makes it all better.
-
I got groceries today. That counts as EDC right? Every Day Consumables.
Ditto, we just got freaking home about an hour ago, it was nuts!
JRI loathe the market/shopping excursion. Except the cereal aisle. My boy loves cereal aisle and that makes it all better.
Lol, the wife can't stand it, especially if it's busy, omg she'll lose it!
JR -
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.

I know it looks a little funky but for $20 and the way it makes everything so detailed to see, it's well worth it..
JRGreat pic

Thanks

JR -
[quote author=MadPlumbarian link=topic=50835.msg1458998#msg1458998 date=1492193853]
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.

I know it looks a little funky but for $20 and the way it makes everything so detailed to see, it's well worth it..
JRGreat pic

Thanks

JR
[/quote]
It does look like a nice custom.
So thats the main blade, scissors and in line philips with both openers opposite of that? -
[quote author=kkokkolis link=topic=50835.msg1459071#msg1459071 date=1492208048]
[quote author=MadPlumbarian link=topic=50835.msg1458998#msg1458998 date=1492193853]
Ok the new work bench came in, kinda scary, it's like you don't want to scratch it! Still have a lot of work to do but I wanted to see how the light works on it so here's a quick pic, here's also a pic of the old one, it's kinda funny, this new one is smaller yet the same size, rather then wider it's deeper.
JREnvy!
Without the tools and with those lights, it looks like a makeup table.

I know it looks a little funky but for $20 and the way it makes everything so detailed to see, it's well worth it..
JRGreat pic

Thanks

JR
[/quote]
It does look like a nice custom.
So thats the main blade, scissors and in line philips with both openers opposite of that?
[/quote]
I had to think for a min, close,
Main blade/nail file
Scissors
Saw
Philips/openers
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login