Show us your fixed blades
-
@ColoSwiss said:
The 'Sword' in the sleeper (cross-tie). French 1874 bayonet. It has pretty decent balance, but considering I learned my fencing from watching Errol Flynn movies, I'm a greater danger to the furniture than an opponent.The image shows up fine when I import it, but is rotated when saved. :ahhh
Very cool Karl!!!!! -
@ColoSwiss said:
Do you recognize them all?only the first 2
in other not so brilliant news, i was ready to order a jaakaripuukko 110 but my phone decided to take a leap of faith that didn't end so well

-
@Aleph78 said:
Well, this is it, folks... I finally did it...
So, the postman was kind enough to bring THIS one in...

:o :ahhh

Ooo, what is it I hear you ask...
Lo and behold! Varusteleka Terävä Skrama is here!

That smurfing thing is huge... The handle is like 1 1/2 hand grip, and I have shovels for hands :P
Description:
Skrama - as in Scramasax or Seax, a short, single edged sword popular in the Middle Ages. Much like the Scandinavian Leuku it doubles up as a tool and weapon.
A fine name is always nice and the best ones are those with some history behind them - our 21st century Skrama would surely meet the demands of any Saxon
man from "ye good olde days".Some specs:
Total length: 430 mm.
Weight: 525 g (knife only).
Blade: length 240 mm, width 46 mm, thickness 4,2 mm.
Edge: 34° for chopping, 25° at the base for finer work.
Steel: Carbon steel 80CrV2, 59 HRC
Grip: Moulded rubber, rough texture for a good grip.Here's a bit of a comparison pic to convey the actual size of that huge smurf :D
Anyways, here goes... Varusteleka Terävä Skrama with (from top left):
Marttiini Leuku 250/2 (early 90's)
Gerber MP600 DET
Victorinox Explorer
Victorinox Farmer
Leatherman Crater C33TX
SOG SwitchPlier
Enjoy :D
-
perfect bacon knife
-
Nice gent! Beautiful blades!
Packing a Mora.
-
Thanks friend!
-
Do you recognize them all?
only the first 2
-
Adventures of Robin Hood - Errol Flynn and Basil Rathbone
-
Princess Bride - Cary Elwes and Mandy Patinkin
-
Court Jester - Danny Kaye and Basil Rathbone (again) (A great send up of swashbucklers.) "The pellet with the poison's in the vessel with pestle..."
-
Scaramouche - Stewart Granger and Mel Ferrer (Granger was also outstanding in Prisoner of Zenda)
-
-
Do you recognize them all?
only the first 2
-
Adventures of Robin Hood - Errol Flynn and Basil Rathbone
-
Princess Bride - Cary Elwes and Mandy Patinkin
-
Court Jester - Danny Kaye and Basil Rathbone (again) (A great send up of swashbucklers.) "The pellet with the poison's in the vessel with pestle..."
-
Scaramouche - Stewart Granger and Mel Ferrer (Granger was also outstanding in Prisoner of Zenda)
I knew Basil and Errol and Danny Kaye, but only knew the first movie.
-
-
Do you recognize them all?
only the first 2
-
Adventures of Robin Hood - Errol Flynn and Basil Rathbone
-
Princess Bride - Cary Elwes and Mandy Patinkin
-
Court Jester - Danny Kaye and Basil Rathbone (again) (A great send up of swashbucklers.) "The pellet with the poison's in the vessel with pestle..."
-
Scaramouche - Stewart Granger and Mel Ferrer (Granger was also outstanding in Prisoner of Zenda)
I knew Basil and Errol and Danny Kaye, but only knew the first movie.
All worth seeing! Also Burt Lancaster in 'The Crimson Pirate'. "There are 200 Royal Marines on this ship"
"And 23 pirates. That puts the odds slightly in my favor." -
-
[quote author=ColoSwiss link=topic=7563.msg1463655#msg1463655 date=1492809313]
Do you recognize them all?only the first 2
-
Adventures of Robin Hood - Errol Flynn and Basil Rathbone
-
Princess Bride - Cary Elwes and Mandy Patinkin
-
Court Jester - Danny Kaye and Basil Rathbone (again) (A great send up of swashbucklers.) "The pellet with the poison's in the vessel with pestle..."
-
Scaramouche - Stewart Granger and Mel Ferrer (Granger was also outstanding in Prisoner of Zenda)
I knew Basil and Errol and Danny Kaye, but only knew the first movie.
All worth seeing! Also Burt Lancaster in 'The Crimson Pirate'. "There are 200 Royal Marines on this ship"
"And 23 pirates. That puts the odds slightly in my favor."
[/quote]Love these movies!!!

-
-
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

-
@SAK Guy said:
Got my Schrade 165 based hunters together for a new pic...
The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

thanks for the link, that was interesting.
I like the look of these, are they very old? I might look around for one. -
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

thanks for the link, that was interesting.
I like the look of these, are they very old? I might look around for one.You're welcome! BF is a great place to research these knives. So is this site:
https://www.allaboutpocketknives.com/Most Schrade collectors hang out in those two places
The Schrade Walden stamped knives were produced '46-'73. The 165UH Uncle Henry (Prospector) was made (69-70) and shipped between in 69-73. The Schrade Walden 165OT (Woodsman) was made between '67-'73.
The 165OT Woodsman was made from '67 to '91. The second knife from the bottom is a post '73 example.
I don't have current dates for the Sears/Craftsman versions but thy would fall somewhere between that '67-'91 date range.
The last USA, factory made Schrade of any kind was made '03-'04 when Schrade closed it's doors. Parts inventories were purchased and some knives continued to appear after that but usually with non std Schrade scales and sheaths.
Hope this helps!

-
Neat knives!

-
@SAK Guy said:
Got my Schrade 165 based hunters together for a new pic...
The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

how did i miss these beauties?!
-
@ColoSwiss said:
Neat knives!
Thx Karl!!!

-
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

how did i miss these beauties?!
Thx Styx!!! A lot of guys that collect and use these think they are the quintessential American deer knife....would probably make quick work of a big feral as well!!!!

-
Schrade Little Finger with left-over original blade and assembled in China. Looks like they did a good job. Even the sheath is well made.
-
@ColoSwiss said:
Schrade Little Finger with left-over original blade and assembled in China. Looks like they did a good job. Even the sheath is well made.What an awesome little knife!!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login