Show us your fixed blades
-
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

thanks for the link, that was interesting.
I like the look of these, are they very old? I might look around for one.You're welcome! BF is a great place to research these knives. So is this site:
https://www.allaboutpocketknives.com/Most Schrade collectors hang out in those two places
The Schrade Walden stamped knives were produced '46-'73. The 165UH Uncle Henry (Prospector) was made (69-70) and shipped between in 69-73. The Schrade Walden 165OT (Woodsman) was made between '67-'73.
The 165OT Woodsman was made from '67 to '91. The second knife from the bottom is a post '73 example.
I don't have current dates for the Sears/Craftsman versions but thy would fall somewhere between that '67-'91 date range.
The last USA, factory made Schrade of any kind was made '03-'04 when Schrade closed it's doors. Parts inventories were purchased and some knives continued to appear after that but usually with non std Schrade scales and sheaths.
Hope this helps!

Yes thank you. I like them all, but probably the older ones more since I like knives with vintage. I'm also hoping to get one of their 50's era pilot survival knives ( like the H-15 but with double guard). Thanks for the dates and info.

-
@SAK Guy said:
Got my Schrade 165 based hunters together for a new pic...
The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

Amazing collection of 165's Robert! I really enjoy looking at them. Thanks for refreshing my memory with the history lesson. I'd forgotten some of that Schrade history. Got to many wabbit trails and holes in the knife world at the moment to process it all. I seem to be alll over the place. :D Maybe I should get more focused.
:D -
@SAK Guy said:
Got my Schrade 165 based hunters together for a new pic...
The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

Sweet collection

-
Thank you David and Steve!!!
I enjoyed posting them!! 
-
This thread is DANGEROUS! Last night, after looking at Robert's collection of Schrade hunting knives, I went into ebay and started looking at prices. Earlier it was Ka-Bars. Its bad enough I've gotten back into picking up non-SAK folders, particularly Cases, on a regular basis. I don't need the trouble and expense of getting back into fixed blade knives! :ahhh
-
@ColoSwiss said:
This thread is DANGEROUS! Last night, after looking at Robert's collection of Schrade hunting knives, I went into ebay and started looking at prices. Earlier it was Ka-Bars. Its bad enough I've gotten back into picking up non-SAK folders, particularly Cases, on a regular basis. I don't need the trouble and expense of getting back into fixed blade knives! :ahhhSorry..... :D
-
This thread is DANGEROUS! Last night, after looking at Robert's collection of Schrade hunting knives, I went into ebay and started looking at prices. Earlier it was Ka-Bars. Its bad enough I've gotten back into picking up non-SAK folders, particularly Cases, on a regular basis. I don't need the trouble and expense of getting back into fixed blade knives! :ahhh
Sorry..... :D

See the slip-joints thread. :D
-
This thread is DANGEROUS! Last night, after looking at Robert's collection of Schrade hunting knives, I went into ebay and started looking at prices. Earlier it was Ka-Bars. Its bad enough I've gotten back into picking up non-SAK folders, particularly Cases, on a regular basis. I don't need the trouble and expense of getting back into fixed blade knives! :ahhh
Sorry..... :D

See the slip-joints thread. :D

-
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

how did i miss these beauties?!
Thx Styx!!! A lot of guys that collect and use these think they are the quintessential American deer knife....would probably make quick work of a big feral as well!!!!

Considering that I've had a very heated discussion with my grandfather about which powertool was best for toenail maintenance, I'd wager these are a bit to nice for us ;)
-
Got my Schrade 165 based hunters together for a new pic...

The top three are Sears Craftsman Deerslayers (2 are hidden tang with one of those with the "Deerslayer" and "A.C.A Edge" etch) The "A.C.A." stood for "Amazing Cutting Action" which referred to a special edge finish which made the edge an even better cutter.
"The A.C.A edge was accomplished with a very coarse belt grind at a fairly low angle, followed by high speed buffing on a cloth wheel. The micro serrations caused by the belt coupled with the stropping action of the buff made for a very sharp blade...."
http://www.bladeforums.com/threads/sears-schrade-a-c-a-edge-was-it-actually-a-different-edge-or-just-hype.966123/#post-10999888The middle knife is an early serialized Schrade Walden Uncle Henry 165UH. The bottom two are Schrade 165OT Woodsman with the bottom one a Schrade Walden (w/ serial).
Notice the older Waldens were stamped on the opposite side of the tang.

how did i miss these beauties?!
Thx Styx!!! A lot of guys that collect and use these think they are the quintessential American deer knife....would probably make quick work of a big feral as well!!!!

Considering that I've had a very heated discussion with my grandfather about which powertool was best for toenail maintenance, I'd wager these are a bit to nice for us ;)
Ok! 
-
Here's an old pic....
Let's play Marbles!!! :D

-
so elk hunting?
-
-
no joke. those just look like they are ready for some serious skinning tasks. smaller deer can be processed with a sharpened piece of tin can (buddy of mine was dumb enough to pack a carbide sharpener but not a knife)
-
@styx said:
no joke. those just look like they are ready for some serious skinning tasks. smaller deer can be processed with a sharpened piece of tin can (buddy of mine was dumb enough to pack a carbide sharpener but not a knife)
You are on the money buddy!!!
These would handle any game in North America. That old Schrade carbon takes an unbelievable edge and the blade shape is universal enough for a variety of hunting/field tasks!!! BTW, that Uncle Henry is probably the sharpest hunting knife I own. :ahhh -
I've got a Schrade Old Timer that is maybe older than me. My family affectionately calls it the thumb splitter. So Somehow I wonder how many limbs they'd lose with the Uncle Henry
-
Guess I shouldn't say how I learned to feel trees (fall trees?), that hot things should not be touched or why makin' fishing hooks and shotgunning beers is not the best combination of recreational activities to do at the same time. As Brooks and Dunn would put it - hillbilly deluxe
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login