Got Paracord?
-
Mora dangler...the toggle goes through a "buttonhole" created with two Matthew Walker knots




-
Variation of the same using a firesteel...


-
Ok, I got my bookmark and they gave you this little piece of silk, I was like seriously? This book is about survival, silk? So I took a piece of a unique paracord, put a diamond knot on and frayed the end to give it that tassel effect, and the paracord is black with a little red, so it totally matched!!
JR -

Sent from my iPhone using Tapatalk
-
That's how I distressed myself on board of ships .There are old pictures from my last years. Enjoy












Trimis de pe al meu SM-A310F folosind Tapatalk
-
@Spork, Lord of Lime Jello! said:
Variation of the same using a firesteel...Couple of years back one of my mate from the boat lost his mora sheath and I made it for him one from rope - notice the brush handle that he added on hid knife , he got bulkie hands lol




Trimis de pe al meu SM-A310F folosind Tapatalk
-
@Spork, Lord of Lime Jello! said:
Variation of the same using a firesteel...
Couple of years back one of my mate from the boat lost his mora sheath and I made it for him one from rope - notice the brush handle that he added on hid knife , he got bulkie hands lol




Trimis de pe al meu SM-A310F folosind Tapatalk
Am yeah , I forgot to mention that I made a rope mat as well for outside door on dirty mess cabin.Good memories, great times, owesom crew
Trimis de pe al meu SM-A310F folosind Tapatalk
-
I got a stool the other day and fig it could use a little touch up, that and a little butt cushion. So I had a couple pieces of cheap imitation mountain climbing rope, so I took the small piece and just spun it to see what size it would come out to, while like that it was a little small and I did a turks and it was just not right, the over passes were so thick it would just be uncomfortable, so I asked the knot god himself(Stormdrane) for a few tips, and one was to remove the inner core. So I figured since removing it would make it a tad longer that I would make it into a pattern to just see if it was long enough. Well it came out a little small so I figured I could put it into a diff pattern which I wanted to put it in for the backrest, and low and behold I just finished it so here's a few pics, I have the longer piece for the bottom piece but I'm calling it a night! So tomorrow I'll be making that 3rd one into a larger piece..
JR -
@MadPlumbarian said:
I got a stool the other day and fig it could use a little touch up, that and a little butt cushion. So I had a couple pieces of cheap imitation mountain climbing rope, so I took the small piece and just spun it to see what size it would come out to, while like that it was a little small and I did a turks and it was just not right, the over passes were so thick it would just be uncomfortable, so I asked the knot god himself(Stormdrane) for a few tips, and one was to remove the inner core. So I figured since removing it would make it a tad longer that I would make it into a pattern to just see if it was long enough. Well it came out a little small so I figured I could put it into a diff pattern which I wanted to put it in for the backrest, and low and behold I just finished it so here's a few pics, I have the longer piece for the bottom piece but I'm calling it a night! So tomorrow I'll be making that 3rd one into a larger piece..
JRNow that's lovely mate and the paracord color it's lush [emoji12] [emoji106]
Sent from my SM-A310F using Tapatalk
-
I got a stool the other day and fig it could use a little touch up, that and a little butt cushion. So I had a couple pieces of cheap imitation mountain climbing rope, so I took the small piece and just spun it to see what size it would come out to, while like that it was a little small and I did a turks and it was just not right, the over passes were so thick it would just be uncomfortable, so I asked the knot god himself(Stormdrane) for a few tips, and one was to remove the inner core. So I figured since removing it would make it a tad longer that I would make it into a pattern to just see if it was long enough. Well it came out a little small so I figured I could put it into a diff pattern which I wanted to put it in for the backrest, and low and behold I just finished it so here's a few pics, I have the longer piece for the bottom piece but I'm calling it a night! So tomorrow I'll be making that 3rd one into a larger piece..
JRNow that's lovely mate and the paracord color it's lush [emoji12] [emoji106]
Sent from my SM-A310F using Tapatalk
Thanks, I bought that some like 9yrs ago and it's been sitting in the basement for like 4yrs, so I fig it would be cool to make into something..
JR -
@MadPlumbarian said:
I got a stool the other day and fig it could use a little touch up, that and a little butt cushion. So I had a couple pieces of cheap imitation mountain climbing rope, so I took the small piece and just spun it to see what size it would come out to, while like that it was a little small and I did a turks and it was just not right, the over passes were so thick it would just be uncomfortable, so I asked the knot god himself(Stormdrane) for a few tips, and one was to remove the inner core. So I figured since removing it would make it a tad longer that I would make it into a pattern to just see if it was long enough. Well it came out a little small so I figured I could put it into a diff pattern which I wanted to put it in for the backrest, and low and behold I just finished it so here's a few pics, I have the longer piece for the bottom piece but I'm calling it a night! So tomorrow I'll be making that 3rd one into a larger piece..
JRCool! An old lab stool!
-
I got a stool the other day and fig it could use a little touch up, that and a little butt cushion. So I had a couple pieces of cheap imitation mountain climbing rope, so I took the small piece and just spun it to see what size it would come out to, while like that it was a little small and I did a turks and it was just not right, the over passes were so thick it would just be uncomfortable, so I asked the knot god himself(Stormdrane) for a few tips, and one was to remove the inner core. So I figured since removing it would make it a tad longer that I would make it into a pattern to just see if it was long enough. Well it came out a little small so I figured I could put it into a diff pattern which I wanted to put it in for the backrest, and low and behold I just finished it so here's a few pics, I have the longer piece for the bottom piece but I'm calling it a night! So tomorrow I'll be making that 3rd one into a larger piece..
JRCool! An old lab stool!
That it is, I used to have one of the square ones back in the day, and I needed a stool to go with the workstation and I almost got one of those newer bar styles with the hand grip through the top but the wife said maybe you should get something with a backrest, so I went with what you see, they didn't have my old square ones, plus this was a little smaller..
JR -
I got some time to putts around, but then had to do things, then eat, so I just might get to finishing this, but here's a pic of the larger one at two passes.
JR -
Ok, I'm done..
Made a few more passes then tightened it up and made a final pass to make it a little bigger, then glued the under half to make sure it wouldn't come undone! Then with the glue gun out I laid the chair down and put on only a couple passes on the back half to make sure that would stay put but not ever come off, the bottom half I just laid there, cause that's wood and the glue would rip it off, but I think it turned out kinda cute, what do you think?
JR -
@MadPlumbarian said:
Ok, I'm done..
Made a few more passes then tightened it up and made a final pass to make it a little bigger, then glued the under half to make sure it wouldn't come undone! Then with the glue gun out I laid the chair down and put on only a couple passes on the back half to make sure that would stay put but not ever come off, the bottom half I just laid there, cause that's wood and the glue would rip it off, but I think it turned out kinda cute, what do you think?
JRSooo... your stool just turned purple?...
Spoiler:
You should see a doctor...

-
Ok, I'm done..
Made a few more passes then tightened it up and made a final pass to make it a little bigger, then glued the under half to make sure it wouldn't come undone! Then with the glue gun out I laid the chair down and put on only a couple passes on the back half to make sure that would stay put but not ever come off, the bottom half I just laid there, cause that's wood and the glue would rip it off, but I think it turned out kinda cute, what do you think?
JRSooo... your stool just turned purple?...
Spoiler:
You should see a doctor...


-
Ok, I'm done..
Made a few more passes then tightened it up and made a final pass to make it a little bigger, then glued the under half to make sure it wouldn't come undone! Then with the glue gun out I laid the chair down and put on only a couple passes on the back half to make sure that would stay put but not ever come off, the bottom half I just laid there, cause that's wood and the glue would rip it off, but I think it turned out kinda cute, what do you think?
JRSooo... your stool just turned purple?...
Spoiler:
You should see a doctor...

It was the only one I had laying around, besides it's the wife's fav color, and a happy wife is a good life!

JR -
So, I decided to do a little paracord wrap for the Skrama's sheath, and I think it came out quite nice...
(For those who missed my post about the Skrama, here's a link: </post/1461983>)

But wait, there is more... Added a Condor 4" MOD Strap and now I have a Molle compatible sheath for the Skrama


For some added security I first wrapped the strap onto the sheath with black electrical tape, and it seems to be quite secure now :)
-
Very nice
Theres also an 'under- over' similar that leaves a "seam" down the middle. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
