Am I missing something? (Gerber content)
-
There are various threads describing the problems with them in the Gerber forum, including really poor build quality, soft metals, pliers and springs breaking, stiffnes ... Some may be OK, but most seem to have issues. I actually carried one occasionally for a few years, even though the scales fell off (overtightened screws from the factory that broke) within a few days of purchase and it just kept getting worse and worse. I finally gave up and started using LM Squirts
The only tool they have that is superior to the LM Squirt is the bottle opener. Now, as I said in other threads, it is a cheaper tool, but Gerber should be able to do a lot better.
-
@mtn said:
Ok, what's the deal with Gerber's? Have I just had 5 duds, or are most of them just... not good? ...
Getting bored with Leathermans and want to keep buying something, but I'm left unimpressed with Gerber so far.Gerber multitools are an acquired taste. Like you, I have acquired Gerber tools, but not the taste. :(
Suggest you try out a Victorinox Spirit or Victorinox Swisstool if you want higher quality.
-
I picked a Diesel last Saturday. Tool deployment was difficult until I applied Rem gun oil to the head glides and the pivots on each tool and worked them separately one evening while watching some drivel on TV.
The past 3 days, no issues, heads slide out with a flick, and the small flat head as well as scissors saw the most duty time.I like my ST300, and my Rebar, yet the new Gerber will be a grab and go on a job site if not sheath carry a LM.
Sent from my iPhone using Tapatalk
-
my problem with gerber, I have an MP400, is that it rusted im several places by just sitting in its sheat at home...
Am I supposed to sand it or what should I do to remove the rust spots?
-
I've owned only 1 mp600 and actually liked it,it was a BO version with blunt nose pliers,it was described as like a AK47 in build quality and reliability I tottaly get that ,I would buy another as the pliers are addictive :D as for the Dime I've had one on my keychain for 2 years and works ok but it's not used very often,I know at one point the alloy scales had bent over at the ends ,I had to bend them back up as effected the tools opening :-\ But saying all this I still prefer my micra and leatherman in general

-
Now the mp800
that's a good MT 


-
The Gerber Dime does receive a lot of unnecessary flak. I have the same one on my keys that I've had since they first came out. I actually bought three of them, as I figured they would be semi-disposable tools, but the other two are still in their boxes, unused.
I went to visit a friend last weekend, and while I was there his wife bought a second hand gas barbecue online. I went with my friend to "help" collect it - not that I could do much in my current condition, but I went along for the ride. When we got there, it was checked over, paid for, and trundled down the alleyway to where the car was parked.
It was too large to fit in the car

I'd travelled light, and only had my neck carry and key carry on me, but the Dime dismantled the BBQ down sufficiently to get it in the car. No damage to cooker or tool.
Not all Gerbers have been reliable in my hands, but overall I remain a fan. Even though I am looking at clearing out a lot of surplus to raise some desperately needed cash, several Gerbers will remain. MP400, 2x MP600, Diesel (all modified), Dime(s), Shard, EAB and EAB Lite will all remain.
-
i flipped the c-clips the other way around on my mp400 and it fliks alot smoother.
maybe its your flicking technique, try putting you thumb on the curved indents in the centre of the handles and index on the other side and holding lightly and flicking.
if you squeeze the handles the pliers wont deploy. -
Gerber MP1 is really good, but expensive also.
-
@50ft-trad said:
The Gerber Dime does receive a lot of unnecessary flak.The Dime doesn't get flak for being bulky or useless. It is actually a beautiful design, with great tool load out and nice ergonomics.
The Dime gets flak for abysmal quality and huge number of flawed products.
I owed two Dimes and both came fault out of the box.
First was a nailbreaker... you'd have to use another tool to open anything. The second one came with bent scales and blotches of paint that peeled off (together with the paint) - note that both were NIP.
I still like the Dime and sometimes play with the second one but it really is shoddy quality.
-
I have had mostly pleasant experiences with my Gerbers. I have a 13 year old MP400 that is amazing still. It's been abused and not really cared for, yet it has no rust and the BO finish still looks pretty good. My MP600 is holding up well after a few years (except those terrible carbide cutters which shattered after the first use). I have two Octanes: the older one is still functional but I pushed it too hard and the pliers bind a bit, but the newer is good to go. Flik is still good after a few years, though I don't really like it much.
I don't love the Dimes, though - pretty low quality. Which is a bummer because it would be a great tool. I have one, wife has one. Mine is a nail breaker so it never got much use. Hers was better in that regard, but the scissor spring broke, the flat driver broke, and one of the plier back-springs broke. We still use it as a bottle opener and use the package opener and knife, too.
I love the Shard - that thing is a beast.
-
I'm repeating most of what has already been said, but I believe in Gerber's past -and best-
creations and tools as some of the greatest hits in the MT history.
TBH I like Gerber over Leatherman and SOG multitools, for the most part. Their catalog is the most diverse, fun, and with the craziest and widest range of tools and gear out there. They've lost a lot since the Fiskars thing, but gained in some other aspects. Quality and innovation might have decreased as their target people diversified and became wider, but their quality pieces are great hits and awesome designs/creations.
The MP series were -and are- unique, be it in the "flickability" function (1st ones), the exchangeable wire cutters (also the1st ones), the exchangeable saw blades (also the1st ones)...
Their range of sizes and styles (Electrician's multitool, 5 different keychain tools, Vise-Grip style MT, med-size OHO clippable tools, ultra heavy duty -cast forged- MTs like the MP1...) and weird things like the Radius, the Balance or the Steady...
Their warranty is awesome, not 25yrs. or lifetime's Vic thing, but incredibly reliable, fair and nice to use.
Finally, their historic models and flagship designs are off.the charts in most departments, hard to beat for the price and time-proven designs, often issued to the US troops (Gerber 06 Auto, MP600 tool, LMF and LHR knives, their old Mark II dagger...)
While they have their steps back and fails (Dime, I am looking at your promising design and implements but horrible tolerances and pooooor QC, and let's not forget -most of- Bear Grylls stuff and extremely cheesy Chinese imported (un)reliable and mostly overpriced gear) they can0t be bashed and looked as "crap" because of them, as most of their stuff is top notch, high quality or at least great for the $ you pay for it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
