Single-wing Wingman
-
I bought the Wingman to replace a Sideclip that was lost. I never really warmed up to the Wingman.
So what to do. You read some post on MTO and take your tool apart. Makes perfect sense right?
Not having mills or surface grinders, not to mention the skills of some here. I had to come up with a way to pull off this mod, that I could do it in my garage.
I tried it with one end not clicking into place and even though it worked I kept thing there must be a way to make both ends of the tool snap into place.
.
So I decided to rivet the spring from one handle to the blade side handle.
First step is to drill out the rivet for the pliars head spring.
Next step is to cut out a clearance on the bottom for the spring.
Then you have to grind the retaining lugs off the spring. So it will fit into the handle.
Then install the spring with one of the hinge screws. Don't take the hinge screw out until you are done.
This will hold it in place when you drill the hole for the 3/32nd SS rod. I used stock from a knife supply that's sold for slip joints. Leave the hinge screw in place while you are peening the rod, so it will stay in position. If it moves now you are in trouble.I used a punch and doomed the end so I could peen the rod inside the handle. Then clamped the punch in a vice so it would back up the rod. Then worked the other end with a small ball peen.




-
@Dean51 said:
I bought the Wingman to replace a Sideclip that was lost. I never really warmed up to the Wingman.
So what to do. You read some post on MTO and take your tool apart. Makes perfect sense right?
Not having mills or surface grinders, not to mention the skills of some here. I had to come up with a way to pull off this mod, that I could do it in my garage.
I tried it with one end not clicking into place and even though it worked I kept thing there must be a way to make both ends of the tool snap into place.Great write-up. You do know about the Hacker badge?
-
[/quote]Great write-up. You do know about the Hacker badge?
[/quote]Aaaaah..........What's a hacker badge? ???
-
OK, at the top of the page click Profile then Awards then Show Available Awards. Look for the Hacker Award. Read and digest. There is info about how to apply somewhere. Easy when you find it.
This link may or may not work...
-
Working on doing the same mod with a rev. Removed the pliers and put the flat and philips drivers in. They miss the handle spring area by a rch, so I am planning on making a thin forked spacer to fill the gap and provide a notch to engage the slot in the tools. Will post pics when I get the spader made.
Also has anyone done this with a wave? Link if possible please!
-
Finally got a Wingman and Wave at the right price for the Single-Wingman and Mini-Surge mods. Made my Single-Wingman today and plan on using the Wingman Scissors for the Mini-Surge which is what I really need. This was a nice little by product. Love it, but I am afraid will not get much use because lack of pliers.
-
@jdindadell said:
Working on doing the same mod with a rev. Removed the pliers and put the flat and philips drivers in. They miss the handle spring area by a rch, so I am planning on making a thin forked spacer to fill the gap and provide a notch to engage the slot in the tools. Will post pics when I get the spader made.Also has anyone done this with a wave? Link if possible please!
This is awesome - but I agree it would be awesome if anyone tries this with a wave. Would love to see pics.
-
- Internal pliers stop strip had to be removed by breaking a rivet, to allow the installation of the tools at the top of the handle. This is a must.
This mod is absolutely fantastic! Just wanted to check - the stop strip for the pliers... is that not attached to the main body of the handle? Or did you just mean the strip's rivet had to be removed in order to fit the other tools?
Do you think this is a good first mod attempt for someone* to try?
*me
-
I believe he meant remove the rivet and the spring piece however it can be left in if you reshape the tools.
There is at least one example of it in the thread.
For a first mod, yeah sure go for it. -
-
Tried this myself earlier as a good beginner's mod. I'll get some Wave scissors for it but for now I dig it just as it is:
Single Wingman/Little Wing



-
Nice one.
Now you can join the special club. /topic/51510 -
Nice one Canine

-
New page banana man dance

-
@AndrewBird said:
So here's my version. I did it slightly different. In order to make the drivers "click" into place, I simply modified the handle to accept the stop clip thing that the bits fit into. This doesn't leave room for scissors, but since I don't have any anyway, it doesn't matter to me.You can see one of the slots I had to cut for the catch to fit in place. There is another on the other side.
Also had to cut a section out here for the spring part of the clip to move into.
I tried fitting the Wingman scissors in as well, and while I got them to fit, they didn't really work properly and made the tools on that end very difficult to open. They also wouldn't fit with the clip piece in like I finished it with. Overall I'm very happy with it though.
Sorry to unearth this thread, but I'm doing it for 2 reasons:
1 - I'd really like to see the pictures in the quote (it seems they're not available anymore)
2 - Since I'm very close to receiving a Surge for my backpack's toolbox, I want to give this mod a go!Enviado do meu Redmi Note 5 através do Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
