Climber club!
-
Im going for a nylon scaled Climber......
.
-
Taking a number 2 I see... :-\ :D
-
Here are my four Climbers. The hp one has the shield on the other side.

-
El Corkscrew made a video saluting El Climber :salute: :
-
Good video El C!
So a salute to you too. 
Pocket perfection. :)
-
:)
-
This dude is on his way to El Collection. I've been looking for one of these for quite a while now... It's cool b/c it will pair well with my 60's Hoffritz Super Tinker :ahhh :D
.jpg)
-
Sweet!!! Look at the shine on those blades!!! -
@Barry Rowland said:
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

-
@El Corkscrew said:
@Barry Rowland said:
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.

-
@El Corkscrew said:
@Barry Rowland said:
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.


You're right about the shine on the Hoffritz, the Super Tinker I have is VERY close to mirror finish... hard to tell until I have it in El hands. I want to say the large blade where it makes a little space between the edge and the tang looks a little worn down, again, hard to tell. A Tourist w/clip point, no KR, Officier Suisse/Crossbow stamp (probably 71 - 74). This one has the Victoria Stamp on the backside of the main blade.
-
@El Corkscrew said:
@El Corkscrew said:
@Barry Rowland said:
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.


You're right about the shine on the Hoffritz, the Super Tinker I have is VERY close to mirror finish... hard to tell until I have it in El hands. I want to say the large blade where it makes a little space between the edge and the tang looks a little worn down, again, hard to tell. A Tourist w/clip point, no KR, Officier Suisse/Crossbow stamp (probably 71 - 74). This one has the Victoria Stamp on the backside of the main blade.
Very cool, prolly a groovy 5 turn El Corkscrew as well... :D

-
@El Corkscrew said:
@El Corkscrew said:
[quote author=Barry Rowland link=topic=71480.msg1482678#msg1482678 date=1495476739]
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.


You're right about the shine on the Hoffritz, the Super Tinker I have is VERY close to mirror finish... hard to tell until I have it in El hands. I want to say the large blade where it makes a little space between the edge and the tang looks a little worn down, again, hard to tell. A Tourist w/clip point, no KR, Officier Suisse/Crossbow stamp (probably 71 - 74). This one has the Victoria Stamp on the backside of the main blade.
Very cool, prolly a groovy 5 turn El Corkscrew as well... :D

[/quote]yup, and I meant to say this knife came with the Tourist I referenced above. It has a 4-turn corkscrew... pretty sure that was pretty consistent with the 84mm's?
-
@El Corkscrew said:
@El Corkscrew said:
[quote author=El Corkscrew link=topic=71480.msg1482681#msg1482681 date=1495477156]
[quote author=Barry Rowland link=topic=71480.msg1482678#msg1482678 date=1495476739]
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.


You're right about the shine on the Hoffritz, the Super Tinker I have is VERY close to mirror finish... hard to tell until I have it in El hands. I want to say the large blade where it makes a little space between the edge and the tang looks a little worn down, again, hard to tell. A Tourist w/clip point, no KR, Officier Suisse/Crossbow stamp (probably 71 - 74). This one has the Victoria Stamp on the backside of the main blade.
Very cool, prolly a groovy 5 turn El Corkscrew as well... :D

[/quote]yup, and I meant to say this knife came with the Tourist I referenced above. It has a 4-turn corkscrew... pretty sure that was pretty consistent with the 84mm's?
[/quote]Not sure about the older 84's, I'm assuming the 91's and 84's used the same corkscrews during the same eras, but might have to verify that with an expert (which I'm not! :) )...
-
@El Corkscrew said:
@El Corkscrew said:
[quote author=twiliter link=topic=71480.msg1482691#msg1482691 date=1495478003]
[quote author=El Corkscrew link=topic=71480.msg1482681#msg1482681 date=1495477156]
[quote author=Barry Rowland link=topic=71480.msg1482678#msg1482678 date=1495476739]
Sweet!!! Look at the shine on those blades!!!Thanks, B. I'm pretty sure this one has been partially restored - blades polished, scissor spring replaced. Apparently the closing snap is a little weak, but still, a great piece. That clip point blade is looking pretty unused. I plan to restore the scales, which seems easier with the older scales.

Nice one El C!

That might be factory polish, the older Hoffritz ones seem super shiny for some reason. Some Mother's mag polish should bring the scales up to the shine level of the tools, that's what I've had the best luck with anyway.


You're right about the shine on the Hoffritz, the Super Tinker I have is VERY close to mirror finish... hard to tell until I have it in El hands. I want to say the large blade where it makes a little space between the edge and the tang looks a little worn down, again, hard to tell. A Tourist w/clip point, no KR, Officier Suisse/Crossbow stamp (probably 71 - 74). This one has the Victoria Stamp on the backside of the main blade.
Very cool, prolly a groovy 5 turn El Corkscrew as well... :D

[/quote]yup, and I meant to say this knife came with the Tourist I referenced above. It has a 4-turn corkscrew... pretty sure that was pretty consistent with the 84mm's?
[/quote]Not sure about the older 84's, I'm assuming the 91's and 84's used the same corkscrews during the same eras, but might have to verify that with an expert (which I'm not! :) )...
[/quote]All the 84 MM from that late 60s early 70s era, which is quite a few that I have seen, have a 4 turn. I'm gonna get to the bottom of this. :D
-
:D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
.jpg)