Any love for the Craftsman?
-
Great post and discussion guys

Let me start by saying that there is never a right or wrong on any edc preference, different people have different needs and different tastes, and that's what keeps everything interesting.I never had a craftsman but I had the handyman, basically the same but with corkscrew instead of the Philips. I bought mine at a time I was trying to get several models and wanted something close to the champ but smaller and less expensive. Even tho I liked it, it was just way too big and bulky for edc (for my needs) and I ended up giving it away to my father in law.
For sak edc I hardly go beyond two layers these days for 91mm and a classic on keychain for scissors. And never really go past 4 layers for all other situations.
This might look like blasphemy to some, but I want my sak's to still look like an elegant pocket knife with some extra handy tools rather than a multi tool with blades. That's what always attracted me to sak's I guess ;) -
@MacGyver said:
Great post and discussion guys
Let me start by saying that there is never a right or wrong on any edc preference, different people have different needs and different tastes, and that's what keeps everything interesting.I never had a craftsman but I had the handyman, basically the same but with corkscrew instead of the Philips. I bought mine at a time I was trying to get several models and wanted something close to the champ but smaller and less expensive. Even tho I liked it, it was just way too big and bulky for edc (for my needs) and I ended up giving it away to my father in law.
For sak edc I hardly go beyond two layers these days for 91mm and a classic on keychain for scissors. And never really go past 4 layers for all other situations.
This might look like blasphemy to some, but I want my sak's to still look like an elegant pocket knife with some extra handy tools rather than a multi tool with blades. That's what always attracted me to sak's I guess ;)I will stick to the Explorer with a suspension clip for my normal EDC as I think that is about the right size but when I do want something thinner I break out the Golfer (Compact) or the Spartan. I will say I have challenged myself to carry the Swisschamp or Champ Plus using a suspension clip and it is doable and not too bad.
Just to make the record clear, I don't love the Craftsman but do think it has a good tool set and just started this thread cause I never seem to see much chat on it so I wanted to know if any folks actually love it and carry it. :)
-
I actually just picked up a Craftsman, and having cleaned it, I am questioning what to do with it now. Warranty (tip broken off the small blade and the file is a little rough), modded fodder, or try selling it.
-
Breaking off the tip of a blade cannot be due to a manufacturing or design error
And presumably, as you say you 'acquired' the Craftsman, you did not purchase the knife originallySending in a tool for warranty when you did not purchase it, and was broken by someone else through some sort of misuse - To me is an abuse of warranty services offered by great companies like Victorinox and Leatherman - Just sayin' :o

If it were me, I would just re-profile the small blade, then use, or sell, as you will. Modder fodder works too.
-
@sir_mike said:
Very interesting debates here.
For me I very much like the inline Phillips and the mag glass too - And appreciate that the inline is way more useful for tight spaces etc etc
I do like the Swisschamp and carry it sometimes - Always feels so good and makes me feel well prepared - Although I used to think of it as ridiculous !!!
I believe it is pocket friendly - but only for tough trousers eg jeans, heavy shorts - Not for 'office' trousers - So a weekender for me.
But six layers for sure is more pocket friendly.But this comment really jumped out at me:
My particular viewpoint concerning the Craftsman is that it is close enough in size to the Swiss Champ that I would prefer the Swiss Champ. No equation has me carrying the Craftsman. :)
I have always wondered why Vic withdrew the larger back spring Phillips (Craftsman/Master Craftsman) and subconsciously had this thought.
And I think you have nailed it NCJ. This is why they withdrew it@Poncho65 said:
If I had one I would talk about it -They are a great SAK and the older version is the ***fraternal twin brother to the Ranger ***- one with corkscrew other with Phillips - I always have a MT with a Phillips driver or at least always have my Gerber Shard so the Phillips thing isn't as big of a deal and that is why I am content with the Ranger I guessHmmm Poncho - Not sure about *twin brother *- You are not confusing your Master Craftsman with your Craftsman are you
;)
I think it is the Ranger's *bigger cousin *!!
Although I never understood how the Master could be the smaller one !!!Was a bit worried about this comment:
@sir_mike said:
Off subject for the most part but since you mentioned the cork screw, I also watched a video earlier that had me thinking that shows that the mini screwdriver doesn't actually fit many eye glasses so why bother carrying one?So immediately went to check and the mini SD fits my glasses fine - Although I really wish Vic would turn it into a double headed mini - flat + Phillips (as some here have done)
Anyway I will leave you with one final thought.....
The 6 layer model that Vic never produced but should have done, and I might try and do a mod one day -
Is ........... tadah ........... a *Woodsman *+ Metal File, or Explorer plus wood and metal saws .... or even Ranger plus Explorer layer :o if you will.
A nice thin 'SwissChamp' minus the tools you are very unlikely to use - Especially if you have a pliers based with you.
What a great SAK that would be.........
:DI think Poncho was referring to the first version of the Craftsman which didn't have plier's or philips on back if I remember correctly. :)
I agree with you 100% on the 6 layer sak that they should make.is what you listed tool wise!

Yes I think I was referring to the first version :D To many different SAKs for me to keep up with
:DI also built the 6 layer SAK you are referring to and since it is a Ranger plus mag, inline Phillips layer I call it a Master Ranger
I also added an inline awl instead of small blade 
20170504_091858 by Poncho 65, on Flickr -
NASA had love for the (Master) Craftsman.... pretty sure that counts for something.

-
Hey - This is interesting - The Space Shuttle on this guy's MC points in the other direction to the one on SAKWIKI ..... Check it out!
And the design seems slightly different - Lines across the body of the SS- Manufacturing error ???
- Later/earlier variation ???
Any ideas anyone ???
He is also one of these people who pronounces Vict-or-inox Victory-nox
PS. Later edit - And note the SpaceShuttle is a Master Craftsman - Not a Craftsman - I think that counts as a derailment!! ;)
-
@Huntsman said:
Hey - This is interesting - The Space Shuttle on this guy's MC points in the other direction to the one on SAKWIKI ..... Check it out!
And the design seems slightly different - Lines across the body of the SS- Manufacturing error ???
- Later/earlier variation ???
Any ideas anyone ???
He is also one of these people who pronounces Vict-or-inox Victory-nox
hahaha, I catch myself saying both, it's an American afflction
We all know that Victorinox never made ANY errors, only magic. :D As far as I can tell, they're both '80-'85 considering the phillips was squared till '80 and the reamer/punch gained the hole in '85. Something I have noticed with special models is that they sometimes throw a change in and often they will use older implements (possibly reserved at an earlier time) for these knives. For example, I have an "85" commemorative knife w/inlay for a Swiss shooting club but it sports the '74-'84 implements...
That was a lot of words for "I don't know"
-
Personally, I've never found the 91mm Victorinox pliers particularly useful/effective. To me, they're in the same category as the fish tickler and mag glass, which are both filed under "meh :-".
That's not to say this is a bad knife in any way, I'm just the wrong person for it :)
-
Where I am from it is lucky if I even say Vic correctly
:D But I think I say it sort of in between Vict or inox and Victory nox, if that makes sense ::) :D -
Tell me about it Poncho! I've a Craftsman and really like it. It has everything I need and the girth is just right to make that saw really work. I'm a big space fan, which is what lead me in its direction in the first place. -
@Huntsman said:
Breaking off the tip of a blade cannot be due to a manufacturing or design error
And presumably, as you say you 'acquired' the Craftsman, you did not purchase the knife originallySending in a tool for warranty when you did not purchase it, and was broken by someone else through some sort of misuse - To me is an abuse of warranty services offered by great companies like Victorinox and Leatherman - Just sayin' :o

If it were me, I would just re-profile the small blade, then use, or sell, as you will. Modder fodder works too.
True, but I do find being honest and offering to pay helps. The other problem is rust or something on the file but I am going to see what I can do about that today.
-
My Craftsman. For its girth, I find it a nice carry. It's one of my favorite SAKs!

-
I love this knife!!

-
Must say i have had a craftsman a few years now and i really like the tool set on it. Yeah i prefer an in line philips but i dont use the mag glass or the fish scaler so this is a good carry. It is always with me if i have my bag. However in my pockets recently is has been my constant carry of a compact and a new addition of an S2.
Tried the Explorer but the compact was back in my pocket the same day. -
Craftsman (pre and post '87) as well as the Master Craftsman are probably my two favorite 5 or more layer SAKs. They contain what I need to get work done around the house and farm, and nothing more. I'd love to have a variaton of the Craftsman similar to what NASA used on the Space Shuttle, or even better one that actually was used in space, but I'm sure if one of those did come up for sale, it would be worth more than even an authentic M1891 Soldier, versus an $20 late '70s Master Craftsman as was used.
-
The Craftsman and Master Craftsman are probability my two favorite tool sets too. I like the girth of the Craftsman for using the saw and the pliers are surprisingly handy. I'm a big space fan so the lineage helps too. I love my Swisschamp but the pocket ability of these two knives is sweet!
-
Well, Craftsman is my only SAK and it is almost perfect, it has all tools i always wanted to have, just missing fish scaler, although I'm not a fishing guy, just have some other uses of this tool in mind, so I would like to replace a wood saw with fish scaler probably. Wood saw might not be as useful in modern urban environment. Well it would be nice to have wood saw too but Craftsman size is just about what firs my hand properly. So that's why I didn't get a Swiss Champ or any other FAT SAK. Besides, I'm not in favor of mag lens or inline philips.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
