Fisher Space Pens
-
@Pablo O'Brien said:
Very nice.

How does it feel in the pocket?Thank you :D
Its not bad but as with anything new in pocket I'll have to test drive it for a little bit. I figure within a week I'll know if I actually like the feel in pocket. I keep my wallet in my front left pocket so this will ride in front right for now.
-
Fits my 84mm Tinker and Fisher pen.
Nice, I have been considering something similar to protect the chrome a bit.
Totally stole the idea on from this thread. There are some great simple sheaths that house a SAK and pen or even inexpensive full size pen slip case that can be cut down I imagine.
-
Fits my 84mm Tinker and Fisher pen.
Nice, I have been considering something similar to protect the chrome a bit.
Totally stole the idea on from this thread. There are some great simple sheaths that house a SAK and pen or even inexpensive full size pen slip case that can be cut down I imagine.
Yes, I have seen the one kaput posts from time to time and have been much impressed!
-
@Pablo O'Brien said:
That purple is 8).

+1 :o 8)
I guess I need to get a fine refill for mine as well
:DThanks guys, the gold clip is a bit odd but I bought a Blueberry Bullet pen for my girlfriend and she didn't get on with the clip so I borrowed it. Carried it again today with my Tinker small and Classic Clockwork.

-
@Fast Bill said:
@Pablo O'Brien said:
That purple is 8).

+1 :o 8)
I guess I need to get a fine refill for mine as well
:DThanks guys, the gold clip is a bit odd but I bought a Blueberry Bullet pen for my girlfriend and she didn't get on with the clip so I borrowed it. Carried it again today with my Tinker small and Classic Clockwork.
Outstanding carry

-
@Fast Bill said:
@Pablo O'Brien said:
That purple is 8).

+1 :o 8)
I guess I need to get a fine refill for mine as well
:DThanks guys, the gold clip is a bit odd but I bought a Blueberry Bullet pen for my girlfriend and she didn't get on with the clip so I borrowed it. Carried it again today with my Tinker small and Classic Clockwork.
Outstanding carry

Thnx A

-
An interesting thread. I thought I had contributed but it looks like my memory is bad or maybe I contributed to another similar thread. I have a bullet pen and carry it most of the time. I find it a bit slim and slippery but it works for short notes etc. I have a trekker but find that it is just too short for writing very much.
Very recently I found a pen similar to a bullet pen however it is a bit thicker and better to write with. The refill was dry and not available locally as it was a Schneider Topball. Ordering from ebay would be quite expensive and not worthwhile. The schneider refill is fairly large so I was able to make a spacer for the white extension on a fisher refill and also make a small aluminium sleeve to fit near the nib end. As a result the "new" pen now fits a fisher refill quite nicely and I like it.
I would have photos except that photobucket is acting up and I cannot seem to upload right now. I used a lathe to make the two small pieces to adapt the fisher refill to the pen however it is quite easily done (although maybe not quite as elegant), with a bit of masking tape built up in strategic areas.
John.
-

Felling black or red? Lol
JR -


Felling black or red? Lol
JRAhhhhhh you caught on to my color scheme.......

-


Felling black or red? Lol
JRAhhhhhh you caught on to my color scheme.......

Lol, one of my fav color combos, I guess you'd like the little guys collection and one of my setups, the sak sheaths I customized, same with his sak, switched out one of the scales to a black, so it's name is deadpool..
JR -
How it's made just showed how they make the pens, though mostly showed the refill side of it.
-
@jcs0001 said:
An interesting thread. I thought I had contributed but it looks like my memory is bad or maybe I contributed to another similar thread. I have a bullet pen and carry it most of the time. I find it a bit slim and slippery but it works for short notes etc. I have a trekker but find that it is just too short for writing very much.Very recently I found a pen similar to a bullet pen however it is a bit thicker and better to write with. The refill was dry and not available locally as it was a Schneider Topball. Ordering from ebay would be quite expensive and not worthwhile. The schneider refill is fairly large so I was able to make a spacer for the white extension on a fisher refill and also make a small aluminium sleeve to fit near the nib end. As a result the "new" pen now fits a fisher refill quite nicely and I like it.
I would have photos except that photobucket is acting up and I cannot seem to upload right now. I used a lathe to make the two small pieces to adapt the fisher refill to the pen however it is quite easily done (although maybe not quite as elegant), with a bit of masking tape built up in strategic areas.
John.
I am able to get onto photobucket finally so here are the photos related to the above. First is the pen with it's original (empty) refill:

This shows the fisher refill with small aluminium adapter that slides on to the ball end and the white spacer taped in place. I made a small insert for the spacer as it was too short if pushed on fully. Cound have made a new spacer but there was no point as this works well.

Another photo of the fisher refill with the aluminium adapter and the short piece that fits inside the white plastic spacer.

It would be easy to adapt a lot of pens to the fisher refill without going to much trouble. Fisher refills are available most places and in my view work very well.
John.
-
An interesting thread. I thought I had contributed but it looks like my memory is bad or maybe I contributed to another similar thread. I have a bullet pen and carry it most of the time. I find it a bit slim and slippery but it works for short notes etc. I have a trekker but find that it is just too short for writing very much.
Very recently I found a pen similar to a bullet pen however it is a bit thicker and better to write with. The refill was dry and not available locally as it was a Schneider Topball. Ordering from ebay would be quite expensive and not worthwhile. The schneider refill is fairly large so I was able to make a spacer for the white extension on a fisher refill and also make a small aluminium sleeve to fit near the nib end. As a result the "new" pen now fits a fisher refill quite nicely and I like it.
I would have photos except that photobucket is acting up and I cannot seem to upload right now. I used a lathe to make the two small pieces to adapt the fisher refill to the pen however it is quite easily done (although maybe not quite as elegant), with a bit of masking tape built up in strategic areas.
John.
I am able to get onto photobucket finally so here are the photos related to the above. First is the pen with it's original (empty) refill:

This shows the fisher refill with small aluminium adapter that slides on to the ball end and the white spacer taped in place. I made a small insert for the spacer as it was too short if pushed on fully. Cound have made a new spacer but there was no point as this works well.

Another photo of the fisher refill with the aluminium adapter and the short piece that fits inside the white plastic spacer.

It would be easy to adapt a lot of pens to the fisher refill without going to much trouble. Fisher refills are available most places and in my view work very well.
John.
Never seen that pen.

Any fisher bullets for scale? Is it all metal?
Interesting.
-
I have lost mine and for the love of all things good, can't seem to find it. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

