Power Access Owners BEWARE
-
Just got mine. Initially mine would over-extend at first. This was only occuring on the handle with the file. I could easily correct the issue by pressing the lock tab into the notch a little. After playing with the tool a little and working the individual implements a bit, the issue seems to have corrected itself. Everything locks up firmly now
-
Mine is fine.
Sent from my Pixel using Tapatalk
-
I'm glad to hear that (so far at least) I am the only one to have this issue, at least to a serious degree. Either way, if anyone else should have these problems I am certain SOG would take care of it.
Def
-
Mines still swimming the Atlantic

-
Fortunately, mine doesn't seem to have this problem.
-
I used my Power Access last night to cut a small tinder block in half and this happened.
I read this as "Cinder Block" and I figured that would be outside the scope of acceptable use anyway....
::)
-
Sadly, no, not cinder. That would be more of the Cold Steel department anyway.
This is just a chunk of paraffin and sawdust, which, honestly, I think a blade should cut well, although I always expect some small amount of resistance.
Not enough to make the blade fold backwards mind you....
Def
-
Grant, have you heard anything from SOG about your PA with the issue?
-
Given the relationship that I have with SOG, I have to deal with this differently from everyone else... well, technically I don't have to, but I am, because I want to help them solve the issue, and, as a result I haven't actually done much to replace the Power Access... yet.
If anyone should have this (or any other) problem with their Power Access, please contact SOG Customer Service about having your tool fixed and/or replaced.
Don't take any chances- SOG has excellent customer service, and it's better to contact them than it is to explain to your family why you can no longer pick your nose.
Def
-
All good here,no such issue.
The Philips screwdriver does flexes the tool when tensioning a screw.
I tightened it with my Explorer. No flex there. >:D -
Just met Kev Davey today. He called in to collect some alcohol I bought a bundle of to split between us, and he ended up staying for about 5 hours :D I asked him to bring the PowerAccess with him, so I could see one up close.
He passed me the tool, and told me that at least he didn't have the same issues that Grant did.... and as he said that, it happened to me..... :ahhh
The reason it happened (and I was able to recreate it several times) was partially over travel of the blade, and partially the tool clumping. As I unfolded the blade, the clumping caused the other tools to lift slightly, and by the time I manually pushed the other tools back home, the blade had already travelled past the "correct" open position. Note that as this wasn't my tool, I didn't subject the implements to any full working load, but it did seem this issue could easily happen if the other tools weren't fully in the "home" position. As I said, I didn't load the tool when the rest of the tools were correctly located, so I don't know if Grant managed to overcome the locking mechanism, or simply didn't have the rest of the tools properly stowed.
Either way, it is still a potential problem, which both the manufacturers and users should be aware of. Careful use is most definitely required, which may explain why someone who keeps breaking his own feet managed to have an issue with it

:D
Long story short - even if your tool hasn't done this so far, it still has the potential to, so please be careful using this tool

I did check with Kev to make sure he was happy with me saying this, before I told the world that his tool is defective :D
-
Literally 10 seconds in his hands and he finds the problem

It's good to know that such a small amount of lift due to clumping, can lift the locking mechanism enough to allow over travel. Definitely need to look out for clumping lifting the locking mechanism before using the blade to avoid potential injuries.
-
Is the locking mechanism the same or similar to the powerlock? As can see how this happens :-\
-
Is this to allow UK carry as non-locking?

-
I think UK law means it's meant to freely fold the opposite way, but for a definitive answer, it would need to be tried in a court of law.
Prosecution: Does the blade lock, or does the blade fold freely?
Defendent: Both...
Prosecution: Does the blade CLOSE freely?
Defendant: No. The blade does not close, it just keeps opening.
Prosecution: So if the blade does not freely close, it is effectively a locking knife?
Defendent: No. The blade flexes away from the article being cut, thus avoiding all harm to what you were cutting, and placing all potentail harm on the operator of the tool.
Prosecution: What is the potential benefit of a knife that won't close, but which flexes away from what you are trying to cut?
Defendent: Dunno! I blame Kirky!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






