New 2017 Leathermans
-
[quote author=pietervn link=topic=70306.msg1413681#msg1413681 date=1484734613]
Another "Second" for LM? These 1/2 tools have been made here for a while now, mostly with a better tool layout. I wonder if they had excess parts lying around?Pete
THIS ^^^
SIGH.
LM all you have to do is ask one of OUR modders to come up with tools for you
.UPDATE the WAVE. R&D a Surge blade exchanger to fit the Wave and add the Rebar Plier head while you are at it. Ditch the Serrated blade and add OHO scissors at the same time omit the small scissor and add an AWL. Ditch the small bit driver an maybe add a Chisel?
Maybe off some other tool in BO? I'd love to see the Crunch in BO. Maybe offer the Crunch in a A100 configuration? LM pruners? Maybe re-design the Juice and offer it in BO? I don't know I'm just spitballing here.
Chisel , can/Bottle/Packed Opener , and Hex bits
Hire this Man while you can LM

No No , Im not worthy , A friend take all credit on this one...
[/quote]
:D -
My apologies for keeping this dying thread alive.
I just don't see the half skeletool being successful. I have a freestyle and love the blade, but as Grant stated earlier, I see the ergonomics being questionable when you reduce the handle width by 50%
Also, I don't see this being a big seller at Walmart. At Walmart and similar retailers you are dealing with the uneducated masses that are not going to understand that this knife is a good value at $20. if it even makes it into the physical stores , how is it going to compete against the Buck Bantam which looks more like what most people think a knife should look like, not to mention how many fools will just buy the $3.87 Ozark Trail knife.
But why do I want the Juice B2 so much? There is nothing special about it, but I love it. It just seems so workmanlike/utilitarian. -
Does LM have new models in mind to replace their Charge TTIs?
-
Does LM have new models in mind to replace their Charge TTIs?
Are we fortune tellers?

Yes, we are, but we are paid to keep quite... or at least that is true for the mods here. 8)
Kidding apart:
I would say it is more likely than a new Wave. Reason, it is the more expensive tool and thus more likely to be worth to go into a further installment.
However, if I had to be guessing I would presume that the next tool in this size would be a "Signal" with 4 outside tools. -
Well gang, I just got my ne Lime Green KBx from the Marlton NJ REI. I must confess,,,,,,I
IT!!!!!! It's simple, not nonsense and the pocket clip/bottle opener ACTUALLY WORKS!! PLUS!! At the $24.95 price point, it won't break your budget either!! 
A light and descreet tool worth thinking about.

Maybe Leatherman's Ad department ought to consider pushing more of their knife line

-
@BIG-TARGET said:
Well gang, I just got my ne Lime Green KBx from the Marlton NJ REI. I must confess,,,,,,I
IT!!!!!! It's simple, not nonsense and the pocket clip/bottle opener ACTUALLY WORKS!! PLUS!! At the $24.95 price point, it won't break your budget either!! 
A light and descreet tool worth thinking about.

Maybe Leatherman's Ad department ought to consider pushing more of their knife line

The new Leatherman knives seem better than I thought but I don't think they are as inexpensive as they probably should be considering what they are. Some arguably better knives are at a comparative price point. I think these knives would be pretty good around sub 18. Is the liner lock part of the frame or a different part?
-
I picked one up the other day as an impulse buy. I was kinda taken by how light it is.
I have been fiddling with it for a couple days and am able to flick it open pretty easily now.
I wouldn't carry it as a main knife, but it makes a very light and easy to carry back up.
I'm a fan of the Skeletool anyway, so I'm pretty comfortable with this one. -
I still believe this is LM's best, most inexpensive and greatest value folder

with -or without- the drivers

-
also,
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@ThePeacent said:
also,- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Instead of releasing those three, they should have made a half Wave or half Charge: two locking blades. locking screw driver, awl, and bit driver. They could have made them in stainless, Ti / Al scales... just like with the full sized ones. There must be a lot of Skele part leftovers and people with tons of free time at hand to come up with something like these.
-
@Tsquare said:
If I heard right then the plain edge kbx has a 420 HC blade. If it is an exact copy of the skeletool blade I am seeing a way to easily get a plain edge for your skeletool.This is exactly what I was thinking when I saw the new KB. If I ever did pull the trigger on a basic skeletool, I'd prefer a straight edge. I think I saw awhile back a (now non working) link on Amazon for replacement blades. I think you can still get a Damascus blade for $95 or so, (ouch) but yeah, if this is indeed the exact same blade it's a somewhat affordable (?) replacement blade.
First post by the way :)
-
From what I've seen of members here buying them, the ones that bought them and liked them were already Leatherman fans anyway. Is there anybody here who wasn't already a dyed in the wool fan of the brand, who has bought one of these half tools and genuinely feels they are good tools?
Many folks are die hard fans who love anything that comes out of the factory, and I'm rather set in my opinions at the other end of the spectrum. It's the people who haven't already become set in their thinking that I'm interested in hearing from. I'm not trying to fan any flames here, I am genuinely interested in whether these are being well received by non-LM fans and new tool users, or whether there are relying purely on the name on the box.
-
@50ft-trad said:
From what I've seen of members here buying them, the ones that bought them and liked them were already Leatherman fans anyway. Is there anybody here who wasn't already a dyed in the wool fan of the brand, who has bought one of these half tools and genuinely feels they are good tools?Many folks are die hard fans who love anything that comes out of the factory, and I'm rather set in my opinions at the other end of the spectrum. It's the people who haven't already become set in their thinking that I'm interested in hearing from. I'm not trying to fan any flames here, I am genuinely interested in whether these are being well received by non-LM fans and new tool users, or whether there are relying purely on the name on the box.
This is such a fallacious thing to assume. That because someone has owned other tools from a manufacturer that they could not offer an unbiased opinion of the current product.
Let's say this was about a SAK. Using your logic, you could not offer an unbiased review of any SAK if you already owned and enjoyed other products of this brand.
Expand this a even further and could vet a whole genre of products like knives or multitools. Then one could not offer an unbiased opinion on each their category if one already has products in either.A review of a product compares and contrasts the attributes the user likes and doesn't like. So if someone says I like this tool because it fits my hand, is blue, has scissors, or because it makes women drool over it, then they offer an opinion based on their likes and dislikes of the product ;not brand loyalty.
Saying I like it because leatherman or victorinox made it would be the only instance you could accuse some of being biased because of brand loyalty.
-
@50ft-trad said:
From what I've seen of members here buying them, the ones that bought them and liked them were already Leatherman fans anyway. Is there anybody here who wasn't already a dyed in the wool fan of the brand, who has bought one of these half tools and genuinely feels they are good tools?
Many folks are die hard fans who love anything that comes out of the factory, and I'm rather set in my opinions at the other end of the spectrum. It's the people who haven't already become set in their thinking that I'm interested in hearing from. I'm not trying to fan any flames here, I am genuinely interested in whether these are being well received by non-LM fans and new tool users, or whether there are relying purely on the name on the box.
This is such a fallacious thing to assume. That because someone has owned other tools from a manufacturer that they could not offer an unbiased opinion of the current product.
Let's say this was about a SAK. Using your logic, you could not offer an unbiased review of any SAK if you already owned and enjoyed other products of this brand.
Expand this a even further and could vet a whole genre of products like knives or multitools. Then one could not offer an unbiased opinion on each their category if one already has products in either.A review of a product compares and contrasts the attributes the user likes and doesn't like. So if someone says I like this tool because it fits my hand, is blue, has scissors, or because it makes women drool over it, then they offer an opinion based on their likes and dislikes of the product ;not brand loyalty.
Saying I like it because leatherman or victorinox made it would be the only instance you could accuse some of being biased because of brand loyalty.
Brands do bias opinion, positively and negatively. So does positive and negative experiences with other products from a given line. Me seeking opinion from someone who has no set prior opinion of the brand, upsets you? Sorry mate, I can't help you with that one

-
.... and yes, I do like it when new guys come along and share their views on their first SAK
-
@50ft-trad said:
@50ft-trad said:
From what I've seen of members here buying them, the ones that bought them and liked them were already Leatherman fans anyway. Is there anybody here who wasn't already a dyed in the wool fan of the brand, who has bought one of these half tools and genuinely feels they are good tools?
Many folks are die hard fans who love anything that comes out of the factory, and I'm rather set in my opinions at the other end of the spectrum. It's the people who haven't already become set in their thinking that I'm interested in hearing from. I'm not trying to fan any flames here, I am genuinely interested in whether these are being well received by non-LM fans and new tool users, or whether there are relying purely on the name on the box.
This is such a fallacious thing to assume. That because someone has owned other tools from a manufacturer that they could not offer an unbiased opinion of the current product.
Let's say this was about a SAK. Using your logic, you could not offer an unbiased review of any SAK if you already owned and enjoyed other products of this brand.
Expand this a even further and could vet a whole genre of products like knives or multitools. Then one could not offer an unbiased opinion on each their category if one already has products in either.A review of a product compares and contrasts the attributes the user likes and doesn't like. So if someone says I like this tool because it fits my hand, is blue, has scissors, or because it makes women drool over it, then they offer an opinion based on their likes and dislikes of the product ;not brand loyalty.
Saying I like it because leatherman or victorinox made it would be the only instance you could accuse some of being biased because of brand loyalty.
Brands do bias opinion, positively and negatively. So does positive and negative experiences with other products from a given line. Me seeking opinion from someone who has no set prior opinion of the brand, upsets you? Sorry mate, I can't help you with that one

Oh don't get it twisted. I'm not upset at all. It's just the opposite. Actually your post made me LOL. Probably should have been in the "what makes you laugh" thread.
Faulty logic always makes good material for the blooper reels. Keep up the good work. [emoji1303] -

.... I'm pretty certain it's not my logic that's faulty here....
But anyway, veering back to rationality for a moment .... have we had any comments from anyone saying they've got one of these as their first tool from Leatherman? It would be interesting (and possibly hysterical for some members ::) ) to hear why they chose that over other tools on the market, and what their views are on it after they'd received it and used it a bit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

