The Humble Utility Knife.
-
Peacent, cant see the pictures
they just say "PhotoBucket blaw blaw blaw" on them 
-
-
Tool Worx Utility Knife.
I found this one at a grocery store of all places along with a few cheap but like branded plier based multi-tools. Although it is a cheap product, there are some very nice features to this one. All metal construction, but the biggest boon for this folding knife, is the lock back feature. Not as fiddly as a liner lock in my opinion. The blade locking mechanism is a bit clunky on this model. It involves having to pull up on an arm which disengages the blade for easy replacement. This mechanism is a bit tricky however as it is a tight fit, meaning I have to struggle a little to shift it. I guess this might loosen up with a wear and tear.
Pros:
- well built for the price line
- pocket clip done well with a wide spatula tip
- lock back
Cons:
- not the best blade retention mechanism out there
Overall, a nice little folding utility knife with some nice features for the price point.
-
Gerber EAB Utility Knife.
This svelt compact beauty from Gerber has an interesting history. The original EAB utility knife was found to have a dangerous flaw that allowed a user to cut their fingers due to a poorly designed lower finger guard that didn't hold the blade in place very well. There was a recall on those. I have two because I tried to get an original prior to the safety recall, but failed. However, I do not mind as I EDCed one of these for a summer a few years ago. Hence, both of these are post recall, and have been altered from the original to make it safer for the end user. If you have one of these, check to see if you have an original and more dangerous model just for safety's sake.
The EAB is very compact. I find this to be the perfect EDC item due to its size. The pocket clip is also a winner on this model. The only downfall to this design is the need for a screw driver to replace the blade.
Pros:
- small and lightweight
- nice wide easy to use pocket clip
Cons:
- need a tool to replace the blade
- if you have the original, can be a laceration hazard to your fingers
Overall, the Gerber EAB is a winner in my books. The design could be improved upon by having a quick change blade system...but I must say, the screw does lock the blade solid with no wiggle that often comes with a quick blade exchange system.
-
Unknown Brand Utility Knife.
If you look long and hard, you will stumble upon all sorts of folding utility knives that are non branded...but each are interesting in themselves. For example, this utility knife has a well textured and decorative handle. Not a big fan of the button locking mechanism, however, the simple push the black button inwards to replace the blade is a good system that offers quick and easy blade exchange. There is also a nice thumb stud on the upper part of the blade. This really helps for delicate work and fine control of the utility knife.
Pros:
- non slip handle
- thumb ring
- easy blade swap
Cons:
- Not the best construction on the textured parts, but there is a metal frame under all that rubber and plastic.
- no pocket clip
- button lock on handle is annoying...but that is just my personal view.
Overall, another non expensive utility knife made by whoever in China. There are some nice features to this one, but there are equal detractions as well. At least the colour makes finding this tool a bit easier around the house or on the job site.
-
CAN-PRO Utility Knife.
I really like this folder because it has a lot going for it. It is very well made with an all metal construction. The knife features a lock back design which I think is superior to a liner lock. The real winner here however, is the black exchange system that is just super easy to use. There is a lever ramp that you press down, which moves the arm upwards, allowing quick and easy blade swapping. Simple and well thought out with one fault. The pocket clip doesn't have a wide tip which makes using one a lot easier. I find these narrow pocket clips tend to hang up and get fowled when in use...or at least with my jeans.
Pros:
- all metal construction
- easy to use blade locking mechanism
- lock back
Cons:
- pocket clip does not have a spatula tip.
Overall, this little guy is simple, and well constructed. The lock back and blade exchange mechanism makes this one little slick folding utility knife.
-
Unknown Brand Utility Knife.
Now this one is a bit odd. There are several really good features with this odd duck, and some fairly bad things about it. The body is thick because there is a rear hatch that swings open for blade storage. Having extra blades with the knife is always a big plus in my books. Because of the width, the main blade is not dead center but located to the right of the body. This makes using this tool slightly awkward. There is an extra wide thumb ring on the spine of the blade. This feature is good for cutting control. The body is all plastic and rubber and lends the tool a cheap feel. When you swing open the rear hatch, you will see that there is no metal foundation to the handle. Because of this, the body can be compressed every so slightly, making the knife creak. It is solid enough but not all that reassuring in use.
Pros:
- extra blade storage
- super fat thumb ring
Cons:
- cheap plastic body
- blade is off center
- blade exchange mechanism is a bit fiddly and not altogether easy to use.
Overall, this model offers quite a mixed bag. What it does well, it does very well. Likewise, what it does bad, it does very bad.
-
Milwaukee Fastback II.
Talk about extremes from the previous model. This is probably one of my most favorite utility knives out there. This one is not only very ergonomic, but features an awesome pocket clip. I might even say best in the industry. The knife features a lot of neat and very useful features. All metal construction, and integrated gut hook, an excellent quick blade exchange locking mechanism of the push in variety. Oddly enough, this one does have a push button locking mechanism on the handle, but for some reason, this one is silky smooth and easy to use. Although I am not a fan of this, preferring a lock back, this one is done right, and I find it is not an impediment in its use. The extra blade storage is also another great feature of this knife.
Pros:
- all metal construction
- integrated gut hook feature and wire cutter
- best pocket clip in the business
- easy to use blade exchange mechanism
- extra blade storage in the handle
Cons:
- can't think of any
Overall, I think this is one of the best utility knife designs out there. This is probably my personal favorite of the lot.
-
Milwaukee Fastback.
The Milwaukee Fastback does not have an internal blade storage compartment, It offers all the great features mentioned for the Fastback II.
Pros:
- all metal construction
- integrated gut hook feature and wire cutter
- best pocket clip in the business
- easy to use blade exchange mechanism
Cons:
- no extra blade storage
Overall, another great design, and I think, tops in its field. If you don't need the extra blade storage, then the Fastback will not disappoint.
-
Unknown Brand Utility Knife.
If memory serves me right, this trio were some of the first utility knives I bought. There is some interesting things going on here. For example, these knives offer a 45 degree lock as well as a 180 degree lock. This turns them into carpet knives, albeit ones using the standard utility knife blades and not the square ones usually associated with a dedicated carpet knife. These also feature a lock back which is always appreciated by me at least. The handles are very comfortable with just the right amount of textured rubber grip. The blade exchange mechanism is also a good one. This system is quick and easy to use. Simply pull the disk away from the blade to disengage the lock. There is a spring that will return the disk back into position once released.
Pros:
- dual blade locking position
- all metal construction with a nice textured grip
- ergonomic
- good quick blade swap locking mechanism
- lock back
Cons:
- a bit on the larger size for a folding utility knife.
- weight
- pocket clip is narrow and harder to use
Overall, these are well constructed utility knifes that are on the larger and heavier side.
-
Sears Craftsman Utility Knife.
As I have mentioned before in a previous post in this thread, Sears is currently hurting with a diminished to nonexistent tool department. I view myself as being lucky I have the few Sears models that I have in my collection. This one is a real looker. Not only is it in a striking high visibility red, the handles are all metal and feature a textured diamond pattern. This knife is not a folder, but a slider. There is a press button mechanism on the top of the knife. The blade assembly slides on rails, and the the button has several locking positions that control how much blade is exposed. The quick blade exchange mechanism is a fit fiddly as you have to press upwards on a small area to allow for free blade removal. Not the worst system out there by any means. The knife offers a nice lanyard loop built in. This knife is fairly thin with slab sides. There is also a master lock on the left handle that prevents unwanted activation of the main sliding mechanism.
Pros:
- all metal construction
- sliding mechanism with positive locking positions
- built in lanyard loop
- sexy red...can I say that?
Cons:
- quick change blade mechanism not of the best design, but is very serviceable
- small main slide locking switch
Overall, this little knife is a looker, and doesn't short change you in the utility department.
-
Unknown Brand Sliding Utility Knife.
Here is a different looking knife. Much like the Sears mentioned above, this model works on the sliding principle as opposed to a folder. An improvement over the Sears model, the main sliding button is protected by two metal protrusions much like what you see on a Gerber MP600. This model is striking because it is made of clear plastic with a metal foundation underneath. Not sure how the finish would last out on the job site, but if left pristine, this one is a looker. Another thing done better than the Sears model mentioned above, is the quick change blade mechanism. This one offers more of a purchase, making it easier on the fingers, and also making the whole process that much more convenient.
Pros:
- sliding mechanism
- Protected sliding mechanism button
- good quick exchange blade mechanism
Cons:
- Plastic is visually stunning, but I have to wonder at its longevity
- pocket clip is narrow with not much of a lip at the tip
Overall, this knife offers a few upgrades to the above Sears model but at the price of possibly poorer handle material.
-
-
Will we be seeing the most humble of utility knives in this thread?

-
-
Another great thread!

Why would someone make something and not put his name on it? So many unknown brands. ???
-
Gerhard Gerber, you bet. I have the most basic in my collection. Just haven't got to them as of yet.
ReamerPunch, there are many utility knives that fall under the unknown brand. Most of them are produced cheaply in China and sold for not a whole lot. They also vary in quality, with some being outstanding value, and others not so much. Some of the ones with a name brand on them can often times be found wearing other labels as the factory that produces them makes them for a wide number of companies.
-
I will always love the Gerber EAB!
It's my Favorite! I just wish I could get my hands on one of the old black ones 
I really like the look of that Craftsman sliding blade. -
@Chako said:
Milwaukee Fastback II.Talk about extremes from the previous model. This is probably one of my most favorite utility knives out there. This one is not only very ergonomic, but features an awesome pocket clip. I might even say best in the industry. The knife features a lot of neat and very useful features. All metal construction, and integrated gut hook, an excellent quick blade exchange locking mechanism of the push in variety. Oddly enough, this one does have a push button locking mechanism on the handle, but for some reason, this one is silky smooth and easy to use. Although I am not a fan of this, preferring a lock back, this one is done right, and I find it is not an impediment in its use. The extra blade storage is also another great feature of this knife.
Pros:
- all metal construction
- integrated gut hook feature and wire cutter
- best pocket clip in the business
- easy to use blade exchange mechanism
- extra blade storage in the handle
Cons:
- can't think of any
Overall, I think this is one of the best utility knife designs out there. This is probably my personal favorite of the lot.
The Milwaukee Fastback II get my vote as the best of the best.
My version opens half way like a carpet knife, or all the way. -
@Ronald SchrΓΆder said:
Stanley 0-10-598For slim X-Acto style blades.
The locking mechanism reminds one of the Cold Steel Pocket Bushman, although on the Stanley it's made of plastic.
Pro: slim and lightweight. Carries a spare blade.
Con: not exactly a quick release system.Where did you find that variety of blades? I have an old version of the Pocket Knife, with chrome plated metal handles, and here in the US all I can find is sheepsfoot and Wharncliffe, only the former of which is sold locally, only in one regional farm supply store.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login































