The SAK Whittling Club
-
@NumberThree said:
I don't know if this counts as whittling per se, but it did include a lot of whittling and was done exclusively with my Vic farmer: https://www.youtube.com/embed/z0G7ok4FJjwFantastic! Love it.

-
@NumberThree said:
I don't know if this counts as whittling per se, but it did include a lot of whittling and was done exclusively with my Vic farmer: http://www.youtube.com/embed/z0G7ok4FJjwWonderful!
-
Had a piece of scrap wood and a spare 10min
They'd probably put this one on the clearance rack. :D
.jpg)
.jpg)
.jpg)
.jpg)
-
@El Corkscrew said:
Had a piece of scrap wood and a spare 10minThey'd probably put this one on the clearance rack. :D
Me too! This wand was carved from a magical component of an ancient shaggy juniper (i.e., dead tree limb) by a small in stature Master Craftsman (not me, I just provide the power). The absolutely necessary smooth surface was handled by the SAK files (subdivision of the X-files). The small nub on the side collects the Force from all over the universe and re-channels it to the wand.
Eat your heart out H & H (Hermione and Harry)......
:ahhh :ahhh :ahhh
-
Went ahead and made another one, I think they will be better rhythm sticks.

.jpg)
-
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Now that's what I call music!
Has anyone ever whittled a wand? (Like of Harry Potter)
My 5 year old has just decided she loves Harry Potter and I was thinking of giving one a try.
Yes - my daughter whittled herself a Hermione Granger wand when she was little - it's beautiful and she still has it now at 19.
Just try and find one that is already nice and thin but strong and will fit her hand. Here's a pic of my daughters:
@El Corkscrew said:
Had a piece of scrap wood and a spare 10min
They'd probably put this one on the clearance rack. :D
Me too! This wand was carved from a magical component of an ancient shaggy juniper (i.e., dead tree limb) by a small in stature Master Craftsman (not me, I just provide the power). The absolutely necessary smooth surface was handled by the SAK files (subdivision of the X-files). The small nub on the side collects the Force from all over the universe and re-channels it to the wand.
Eat your heart out H & H (Hermione and Harry)......
:ahhh :ahhh :ahhhBoth of y'all's look MUCH more legit.

-
I have several books on whittling and carving, some 3D resin examples to copy from, plus some flexcut carving tools (palm tools). I never had the time to play around with it before, and now any attempts to use them would be foolish due to neck issues. I'll try to get them photographed and listed on the trade forums in the next couple of days. Maybe someone here can get more use from them

-
With Magentus' very generous gift of a Mora crook knife, I'm looking to start carving a decorative/lovespoon for my girlfriend. I want it to be a surprise so finding the time/location to do so has so far proved very difficult, but I think I have some time tonight so I'll hopefully be making a start.
A question:
Any tips for a first-time spoon carver? I've found a variety of tips online but wondered what the hive mind of MTO could suggest!
I'm using a basswood blank, seems to be the best I've found for easy carving. I'm just planning on using the crook knife, various SAKs and Opinel No. 7.
-
@caninesapien said:
With Magentus' very generous gift of a Mora crook knife, I'm looking to start carving a decorative/lovespoon for my girlfriend. I want it to be a surprise so finding the time/location to do so has so far proved very difficult, but I think I have some time tonight so I'll hopefully be making a start.A question:
Any tips for a first-time spoon carver? I've found a variety of tips online but wondered what the hive mind of MTO could suggest!
I'm using a basswood blank, seems to be the best I've found for easy carving. I'm just planning on using the crook knife, various SAKs and Opinel No. 7.
Keep your blade sharp, your thumb out of harms way and have fun, show us the results

-
@TazzieRob said:
Keep your blade sharp, your thumb out of harms way and have fun, show us the results
Solid advice! I'll make sure to show my progress here. I made a start last night - put together a design for the spoon, traced onto the wood and started to carve, but by that time it was quite late. Carrying on with it tonight!
-
Few more questions:
anyone had any luck with staining basswood? I've read various reports online that vary wildly in terms of useful advice. I'm guessing it would be something like sand the project over completely until smooth, then seal, then stain. I'm guessing off-the-shelf DIY shop sealant and stain would work ok?
Thanks!
-
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!
I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
-
Beautiful Rob, congratulations on such a great first spoon, and massive CONGRATS on your engagement!

-
@caninesapien said:
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
Congratulations!
the spoon -
@caninesapien said:
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
Great work on carving a spoon and Congratulations!

-
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!
I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
Great work on carving a spoon and Congratulations!

+1

-
@caninesapien said:
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
Congratulations!! That is a nice spoon. Your first one at that.

-
@caninesapien said:
So I finally finished the lovespoon I was carving as a surprise gift to my girlfriend. I gave it to her on Monday just before asking her to marry me!I'm really pleased with the way it turned out. The engraving was part by design and part by necessity, but it came out as good as I could have hoped.
Also my first time carving a spoon!

(She said yes, btw!)
And they lived happily ever after. :)
Congrats

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login