MP600 saw mod
-
I am afraid I am no help on this matter jaya

I had to modify a SOG saw for mine and still it isn't perfect but works like it should

-
@jaya_man said:
As I've shared in other threads, I recently got a Multi-Lock Scout. Here's a recent picture of it.

Am thinking of replacing the lanyard ring tool with a wood saw. As my knowledge on Gerber is very minimal, I only know of one MT that has the wood saw (the Diesel). Will it be a perfect fit (does it have the same thickness as the lanyard ring)?
Any other Gerber MTs that have the wood saw?
Sent from my iPhone using Tapatalk
I can tell you that the lanyard ring from my MP600 was about the same thickness as the SOG saw I used.
I'll bet that the Gerber saw is similar in thickness. -
The only other Gerber that I can think of with a saw is the Strata. From memory, and I may be wrong here, I believe the Diesel saw (and SOG saw) are longer.
Note also that you'll need to change the location for the saw, probably replacing the can opener at a guess (unless you go bladeless, and carry a separate knife).
-
Thickness shouldn't be an issue thanks to the pass through fastener.
Length I'm not sure about. I put Diesel scissors (approx half cm longer than that diamond file) into a 600 recently and they fitted in.
Outside pivot will need a quick reshape. Here are a few pics showing the difference from when I fitted the Diesel scissors. -
Thanks for the tips everyone

Sent from my iPhone using Tapatalk
-
Not to dig up an old thread, but I was considering doing a mod like this on my Center Drive. With a saw in place of the serrated blade, it would pretty much cover the uses I have here in the country.
What's the tool used to disassemble a Gerber? -
I read somewhere in this post or another, pliers can be used to loosen pivot screws...
This video also shows a special tool:
Adjustable spanners...
Sent from my iPhone using Tapatalk
-
Thanks J Man!!
-
@Barry Rowland said:
Thanks J Man!!Glad I could be of help... still haven't done my mod yet though... still looking for that donor... worst comes to worst, might just buy a cheap mt with saw and take it from there

Sent from my iPhone using Tapatalk
-
@Barry Rowland said:
Not to dig up an old thread, but I was considering doing a mod like this on my Center Drive. With a saw in place of the serrated blade, it would pretty much cover the uses I have here in the country.
What's the tool used to disassemble a Gerber?loki-mobile sells the tools to dis-assemble MTs
</post/1440122>I got the Leatherman and Gerber wrenches. They work great and make dis-assembling a breeze.
-
Thank you sir! -
@Barry Rowland said:
Not to dig up an old thread, but I was considering doing a mod like this on my Center Drive. With a saw in place of the serrated blade, it would pretty much cover the uses I have here in the country.
What's the tool used to disassemble a Gerber?We love to bring old threads back Barry :ahhh I think a lot of info is back in our archives and every now and again it is great when it is brought back to the forefront

-
Also good luck with the mod

-
Thanks Poncho! -
I don't know why ppl make a big ordeal about removing pivots from mp's, pair of carpenters pincers from pound land /dollar store are perfect for the job.

-
True indeed!! -
@kingofswords said:
I don't know why ppl make a big ordeal about removing pivots from mp's, pair of carpenters pincers from pound land /dollar store are perfect for the job.

Very true, but the difference between using something that works and something made for the task is night and day. Like using a knife to remove a branch from a tree. It can be done, but a saw works better.
I have used many different tools to adjust my Gerbers. The best I have used are the tools loki-mobile sells. They are made to take apart the specific tools and work much better than any thing else 'that works.'
YMMV
-
These are what I used and they worked very well
/post/1032297
-
Good mod!
I havent carried a Gerber in a long time. Think there is one around here some where.
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




