Learning to make Sheaths
-
@sak60 said:
Thanks for the encouragement guys. Thanks pfr for the tip about the spacers, I should have shown a side view
I've included the best my phone can do this time. The back section down to just past the guard is double thickness. At the throat it's probably hard to see (because I've skived one down) it's 5 layers (13.5mm). So there's 2 welts down to the belly of the blade then skived down also. Thanks again all. 
Yup, that's what I meant. Well done! It makes the sheath more streamlined.

-
Wow :o That is a really nice looking sheath you have made there
Very well built it looks like as well 
-
Thanks for the encouragement guys. Thanks pfr for the tip about the spacers, I should have shown a side view
I've included the best my phone can do this time. The back section down to just past the guard is double thickness. At the throat it's probably hard to see (because I've skived one down) it's 5 layers (13.5mm). So there's 2 welts down to the belly of the blade then skived down also. Thanks again all. 
Yup, that's what I meant. Well done! It makes the sheath more streamlined.


-
Nice work !

-
Nice work man!
-
That looks nice, looks original, better then my leather work if you ask me..
JR -
Great job mate

-
I've messed up just enough leather work to know how good a job you've done on that sheath - very nice.
John.
-
Thanks Steve, Ductape, JR,Zed. :) :) :) :) Thanks John, I had a couple of not so great results before I attempted this, I'd still like to improve on my next one. :) Thanks all.

-
Same sheath with the rivets changed and another just finished for a Case Q knife.
-
NICE

JR -
Great workmanship!

-
@sak60 said:
Same sheath with the rivets changed and another just finished for a Case Q knife.May I make some sugestions?
Maybe next time place the "lock" near the pommel, where the hilt is thinner. It would make for a snugger fitting, less possibility for the knife to move.
Since it has a guard, you could put another button lock over it (slower deployment, more safety against loosing/accidental release).
You can use some elastic to make the strap to "get out of the way" when the button is opened. Less chance of accidentally cutting the leather loop.Check this video to see what I mean:
https://www.youtube.com/watch?v=8vBQObkG5-Q

-
The only other knife sheath I liked better was the Ontario 499's, back in the day my buddy had his fathers, and it was nice because of the stone and the two open grommets on the bottom so you could tie it off in any direction, but I carried my fathers kbar and would be like, mines bigger then yours

JR -
Same sheath with the rivets changed and another just finished for a Case Q knife.
May I make some sugestions?
Maybe next time place the "lock" near the pommel, where the hilt is thinner. It would make for a snugger fitting, less possibility for the knife to move.
Since it has a guard, you could put another button lock over it (slower deployment, more safety against loosing/accidental release).
You can use some elastic to make the strap to "get out of the way" when the button is opened. Less chance of accidentally cutting the leather loop.Check this video to see what I mean:
https://www.youtube.com/watch?v=8vBQObkG5-Q

pfrsantos all suggestions are welcome thanks for the tips, keep them coming if you see anything else. Those are good ideas and thanks for the vid link, that's a H/Dty sheath. I've got some WW2 blades that need sheaths and I'm going to try and make sheaths close to what might have come with them if possible at this stage hence the pattern of the Kabar, although the colour and rivets are not right. Also they are, apart from that one, usually fairly basic in construction. There were however some that came with the keeper down by the guard as you suggest (Case amongst others), and I do have a Case that needs a sheath (posted in fixed blades) so food for thought. I will look into the elastic retention to see how doable it is for me, interestingly I was considering the silent snaps as in the video since they came with some WW2 makers knives as well. Thanks again.

-
@MadPlumbarian said:
The only other knife sheath I liked better was the Ontario 499's, back in the day my buddy had his fathers, and it was nice because of the stone and the two open grommets on the bottom so you could tie it off in any direction, but I carried my fathers kbar and would be like, mines bigger then yours
JR
Thanks JR. yes they are both good knives. I have some Vietnam blades. Camillus and Conetta MK2's also Camillus and Ontario JPSK's. Excellent that both of you have those knives passed on to you. The stone holder is useful, and going by the edges on a couple of the Kabar's (wartime) that I've bought they could have done with a stone as well. 
Andrew. -
Copied a Case sheath this time (not exactly) but close. This one I put the keeper up higher as pfrsantos
suggested. Still not totally happy with my edges and dying, stitching is ok I think just need more practice. -
What the WW2 looked like.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login