What did you just get?
-
@Sparky415 said:
A little cree led arrived today for my newly aquired 2D Maglight, seem to work well

Does that Cree led come as a bulb you just screw in? Amazing

-
Yes Zox

13quid from Amazon
Shout if you need a link
-
@Sparky415 said:
Yes Zox
13quid from Amazon
Shout if you need a link
I've found them on eBay

Very cool upgrade for a trusty old mag light.


-
Thanks to Mr. Hauser here at
for a great little modded Spirit.

![20170623_210816[2797].jpg](/assets/uploads/_imported_attachments/migrated/323429_20170623_210816%5B2797%5D.jpg)
-
Solo 108mm

Sent from my iPhone using Tapatalk
-
A Crosman Bushmaster pellet gun and pellets, two large framing squares, a small Stanley brass and rosewood triangle square, a drill brace, a 6 foot tape measure, a pair of tailor's scissors, a 4 pond cross pein hammer, a Brinkmann 4 D-cell Flashlight and a Disston keyhole saw. From an estate sale for the princely sum of $20 U.S.
-
@Yadda said:
A Crosman Bushmaster pellet gun and pellets, two large framing squares, a small Stanley brass and rosewood triangle square, a drill brace, a 6 foot tape measure, a pair of tailor's scissors, a 4 pond cross pein hammer, a Brinkmann 4 D-cell Flashlight and a Disston keyhole saw. From an estate sale for the princely sum of $20 U.S.Nice haul!

-
A good mix of stuff there Yadda, and for an excellent price too - bonus !
I've just received large box of MT goodness from the US (thanks Matt ! ).
Some of the less common MTs were:
A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
(these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude" ;) :D
-
@gregozedobe said:
A good mix of stuff there Yadda, and for an excellent price too - bonus !I've just received large box of MT goodness from the US (thanks Matt ! ).
Some of the less common MTs were:
A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
(these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude" ;) :D
Nice haul.

Any pics of the extra room you had to build for those?
-
Camillus 51 Barlow

-
-
@gregozedobe said:
A good mix of stuff there Yadda, and for an excellent price too - bonus !I've just received large box of MT goodness from the US (thanks Matt ! ).
Some of the less common MTs were:
A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
(these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude" ;) :D
If this is slowing down, I'm backing up! Very nice additions to an already fantastic collection.
I wish your multi tool fairy would visit me. :D...and finally Welcome to the Stanley Clock/Pliers club! What took you so long? >:D
-
@gregozedobe said:
A good mix of stuff there Yadda, and for an excellent price too - bonus !I've just received large box of MT goodness from the US (thanks Matt ! ).
Some of the less common MTs were:
A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
(these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude" ;) :D
If you ever want to get rid of the red SOG Micro ToolClip, let me know.

-
@Yadda said:
If this is slowing down, I'm backing up! Very nice additions to an already fantastic collection.
I wish your multi tool fairy would visit me. :DNo multitool fairy here, just spending way too much time and $$$ on ebay ;)
@Yadda said:
...and finally Welcome to the Stanley Clock/Pliers club! What took you so long? >:DI've been a member of the Stanley Clock/Pliers club for years (maybe even an MTo founding member). I think this one is # 8 in my collection :-[
And the Stanley Clock/Pliers isn't even the weirdest Stanley Clock/Tool I have - there is this bizarre clock/driver that looks like a floating mine from WW2. I think the designers of these promo watch/tools must have been smoking some seriously strong weed during their design sessions, they came up with some way-out wacky ideas (watches with an expanding ruler or another one with c-clamp for example ! )

-
If you ever want to get rid of the red SOG Micro ToolClip, let me know.

Trouble is it isn't in great shape (dirty, and the usual broken clip for the plier handle), and postage from Oz to the US is very expensive :(
Well, if you should find one in better shape, let me know. It is one red tool I would like to complete my red MT collection. Shipping no problem for one that is collectable.
-
As my last drop in worked so well I went ahead and bought another one for my second maglight,

the original seller had sold out so I ordered from somewhere else, unfortunately I didn't read the description well enough,
3.2v to 9v, it didn't work in the maglight, I'm running 2 pairs of AA eneloops at 1.2v, 2.4v is not enough
Wait a min I have a 6v light that I've been meaning to upgrade

That's lucky it worked well in there

-
@Sparky415 said:
As my last drop in worked so well I went ahead and bought another one for my second maglight,
the original seller had sold out so I ordered from somewhere else, unfortunately I didn't read the description well enough,
3.2v to 9v, it didn't work in the maglight, I'm running 2 pairs of AA eneloops at 1.2v, 2.4v is not enough
Wait a min I have a 6v light that I've been meaning to upgrade

That's lucky it worked well in there

Looks like an option I may want to explore with my recently acquired 5D Brinkmann flashlight.
-
A 45lb barbell weight, it just showed up via ups, the guy made me sign then says "here it's heavy" lol.. but the kid wants to start working out what he has in mind idk, but he said it's what he used when he was on the football team..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
