Car boot finds
-
@cody6268 said:
Quite a few things from the flea market, I think I went overboard. ' I believe that aforementioned scalper called in sick today.A few knives for $15
Three Electrician's Knives, two USA Colonial, the other Irish Imperial. The seller also threw in Queen, Colonial, and Camillus parts knives which I'm saving for backsprings.
2017-06-26_01-18-35 by cody6268, on FlickrVictorinox Classic w/pouch and unknown "Scout Knife" miniature.
2017-06-26_01-19-44 by cody6268, on FlickrFrom another seller, Kutmaster USCG Rope Knife, $7.
2017-06-26_01-20-33 by cody6268, on FlickrA few hand tools, $12.
Irwin Perfect Handle (marked with military markings, and was actually former military, as the owner was issued it) slotted screwdriver. Needs the tip reprofiled. Now I see why Perfect Handles are so well revered, it feels great and indestructible.
2017-06-26_01-25-04 by cody6268, on FlickrKrauter USA Pliers, needlnose/cutter and duckbill. Stahwille Germany snap ring pliers--the biggest I've seen. That one pair of pliers is $60 new. The duckbill Krauters need some work to the pivot, they were overtightened with a center punch.
2017-06-26_01-24-13 by cody6268, on FlickrAnd finally, an $5 like new US made Browning sheath, which cost a measly $5. Unfortunately, I scuffed it carrying in my pocket (didn't want to undo my belt in public). Dates to the 1970s, I think. It holds a Vic 108mm GAK well.
2017-06-26_01-22-11 by cody6268, on Flickr
2017-06-26_01-22-36 by cody6268, on FlickrLots of good stuff ther C!

-
I only got the axe head as a test to see if David is still watching this thread

A Perfect pattern screwdriver and a pair of Stilsons to see if Yaddas watching :DGood additions Tony.
I'm still here. :D Great lookin axe head Tony! Hasnt been over sharpen and the poll isnt hammered into a mushroom. What brand is it?David
I was just checking :D
I haven't cleaned them up yet as my garage is a huge mess again :-[ -
Tony,
....since you mentioned cleaning. Any recommendations on how I should proceed with cleaning the metal ruler on the little rosewood Try square?
Also, both of the framing squares are really rusty with one having a layer of paint on the backside.

I don't have any receptacles large enough to soak them in vinegar so I'm considering wrapping them in paper towels and then soaking the paper towels in vinegar. Then sticking them in a garbage bag for a few hours. Any other recommendations or ideas? -
The problem with using vinegar is the steel will start rusting the second you wash it off :ahhh
The square, do you have one of those erasers that has one end for pencil the other is for pen? Try the pen end it should work and hopefully not remove any lettering, good for any brass on there aswel ;)
The framing squares, I would just use a wire wheel, see if that works first
-
@Sparky415 said:
The problem with using vinegar is the steel will start rusting the second you wash it off :ahhhThe square, do you have one of those erasers that has one end for pencil the other is for pen? Try the pen end it should work and hopefully not remove any lettering, good for any brass on there aswel ;)
The framing squares, I would just use a wire wheel, see if that works first
Thanks for the feedback Tony!

I'm just hoping I don't mess up the Try Square.
FYI, I looked up the medallion on Disston keyhole saw. My saw was made somewhere between 1917 and 1940. Not bad shape for a 70 to 100 year old saw. -
The rubber is what I would start with it's nice and gentle, they make something like that to clean circuit boards with,
It's nice when you find a tool that was treasured, I'm always amazed at the age of some of the stuff we find
There are Guys here that are real experts in old hand tools (just don't ask about sharpening, it never ends well
)
http://www.ukworkshop.co.uk/forums/hand-tools.htmlAdded,
Take a look in here, that should keep you out of trouble for a while
:D
http://www.ukworkshop.co.uk/forums/tool-cleaning-and-restoration-links-t82859.html -
@Sparky415 said:
The rubber is what I would start with it's nice and gentle, they make something like that to clean circuit boards with,
It's nice when you find a tool that was treasured, I'm always amazed at the age of some of the stuff we find
There are Guys here that are real experts in old hand tools (just don't ask about sharpening, it never ends well
)
http://www.ukworkshop.co.uk/forums/hand-tools.htmlAdded,
Take a look in here, that should keep you out of trouble for a while
:D
http://www.ukworkshop.co.uk/forums/tool-cleaning-and-restoration-links-t82859.htmlThanks for the recommended website! :ahhh. I will be spending time there.
FYI...you've seriously underestimated my ability to stay out of trouble. >:D

-
Bought some bits this morning,

Electricans knife made by CK (Germany) Some big fat Electrician has been swinging on the screwdriver so the lock needs some attention

The 4'' is made by Bahco :D
-
Nice !

-
Those small adjustables are always neat finds. That one needs a good vinegar bath. Are those oil filters?
-
Steve :D
@Yadda said:
Those small adjustables are always neat finds. That one needs a good vinegar bath. Are those oil filters?I'm doing less vinegar nowadays, Wire wheel then oil ;)
Ah now you mention it they do look like oil filters, no they are Gaz cartridges, a lot of people won't buy older rusty looking canisters
https://www.campingaz.com/uk/c-623-pierceable-cartridges.aspx -
Nice funds Tony

-
Nice funds Tony

Thanks Paul, It was hard work this morning, really crowded and roasting hot :ahhh
Funds
smurfing auto correct 
-
After some percussive maintenance (this was one of the hardest I've ever had to dismantle
)
Didn't loose the tiny spring

Looking a bit more useable now :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

