Learning to make Sheaths
-
Same sheath with the rivets changed and another just finished for a Case Q knife.
May I make some sugestions?
Maybe next time place the "lock" near the pommel, where the hilt is thinner. It would make for a snugger fitting, less possibility for the knife to move.
Since it has a guard, you could put another button lock over it (slower deployment, more safety against loosing/accidental release).
You can use some elastic to make the strap to "get out of the way" when the button is opened. Less chance of accidentally cutting the leather loop.Check this video to see what I mean:
https://www.youtube.com/watch?v=8vBQObkG5-Q

pfrsantos all suggestions are welcome thanks for the tips, keep them coming if you see anything else. Those are good ideas and thanks for the vid link, that's a H/Dty sheath. I've got some WW2 blades that need sheaths and I'm going to try and make sheaths close to what might have come with them if possible at this stage hence the pattern of the Kabar, although the colour and rivets are not right. Also they are, apart from that one, usually fairly basic in construction. There were however some that came with the keeper down by the guard as you suggest (Case amongst others), and I do have a Case that needs a sheath (posted in fixed blades) so food for thought. I will look into the elastic retention to see how doable it is for me, interestingly I was considering the silent snaps as in the video since they came with some WW2 makers knives as well. Thanks again.

-
@MadPlumbarian said:
The only other knife sheath I liked better was the Ontario 499's, back in the day my buddy had his fathers, and it was nice because of the stone and the two open grommets on the bottom so you could tie it off in any direction, but I carried my fathers kbar and would be like, mines bigger then yours
JR
Thanks JR. yes they are both good knives. I have some Vietnam blades. Camillus and Conetta MK2's also Camillus and Ontario JPSK's. Excellent that both of you have those knives passed on to you. The stone holder is useful, and going by the edges on a couple of the Kabar's (wartime) that I've bought they could have done with a stone as well. 
Andrew. -
Copied a Case sheath this time (not exactly) but close. This one I put the keeper up higher as pfrsantos
suggested. Still not totally happy with my edges and dying, stitching is ok I think just need more practice. -
What the WW2 looked like.
-
Nice job

JR -
Sweet

-
Thanks JR and MusicMen
This is the sheath that came with the knife. -
I got a old knife that was my grandfathers, the knifes in bad shape the handles wrapped in electrical tape and the sheath looks kinda like that one, but i think it's got an Indian head or scout stamp and a little metal trim. Maybe I'll dig it out tomorrow. It's been a while, maybe I can clean it up,
JR -
@MadPlumbarian said:
I got a old knife that was my grandfathers, the knifes in bad shape the handles wrapped in electrical tape and the sheath looks kinda like that one, but i think it's got an Indian head or scout stamp and a little metal trim. Maybe I'll dig it out tomorrow. It's been a while, maybe I can clean it up,
JRThat's awesome, thanks for sharing that; it would be good if you could restore them seeing as it was your Grandfathers', if not then at least make sure it doesn't deteriorate further.The sheath is actually in worse condition than it looks in the pic. I didn't want to lose what's left of the names on it so with a new one I don't have to worry about damaging the sheath, as the knife is in with others that get moved around a bit.

-
Great job !

-
Something a bit different. This is the start of a frog for my Remington 1915 dated P1907 bayonet. I'll also have to make and attach a small strap and buckle across the top of the locket opening.
-
Just the strap and buckle and a couple of rivets to go.
-
That looks good. You're a pro now.
-
Thanks Gohard
lots to learn and doing it for my own enjoyment. Cheers :) -
Made a few myself. The welt is just there to stop the blade cutting through the stitching and on the blunt side to shape the sheath. I normally don't use rivets on sheaths.
But if someone ask for them I do fit it. Nice work there mate
.
-
Hey they're great! Way ahead of where I am, I don't do tooling either. I started because I wanted to recreate some falling apart WW2 sheaths that's why I'm using rivets. Yours are terrific thanks for showing them.

-
Thanks. If you need advice. I might be able to help.
-
@sak60 said:
Just the strap and buckle and a couple of rivets to go.Pretty cool! Love the aged look.
When I saw the first pics, I thought of adding a little strip of leather, with a couple of press butons, to keep the "scabbard" in place (probably not needed, just being overly careful). The idea is to ensure the scabbard stays in place and doesn't fall, no matter what you do.
Something like this:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
