Let's see your sharpening stones/gear!
-
Rather than starting a new thread I figured I'd resurrect this one since it isn't that old. I have a Gatco (fine, med. course) guided sharpener that I use on blades that need a lot of work. Once they are fairly sharp, until recently, I use a ceramic rod setup. I find that it also works to put a final sharpening on blades that need a touch up. I find that the ceramic sticks work well and are quick. I can touch up a paring knife or pocket knife in a minute or less most times.

Until recently I've never bothered stropping my blades. I bought a stick of Veritas green honing compound and made a strop for it. I had a strop made by a friend years ago and misplaced it. I just found it - its' the longer one in the photo.

The strop with the honing compound really puts a fine edge on a blade. I'm quite impressed with it. It also puts a nice polish on a blade particularly when the blade has scratches removed with fine grades of sandpaper. I suspect that the compound is quite aggressive and that one could get a finer edge with another compound but this certainly works for my purposes.
I haven't included photos but I also have a 1000/4000 grit reversible water stone and a few oil stones. I use them for chisels and planes and occasionally for blades.
The previous posts certainly list some great equipment and details about sharpening. One thing I've seldom used and don't own is a honing steel. Interesting that a few posters use them.
Thanks,
John.
-
I hadn't read the info on the veritas (leevalley) honing compound before posting the above. Interesting information and it does make sense in that the compound certainly seems a bit aggressive. For my purposes it is very good and I'll stick with it. Might not be as good for a straight razor of course.
John.
-
Very cool info jcs!!!

-
No sharpening "systems" in my book. A DC4 and an Arkansas stone are what I use at home, and there's a Vic pen for use on the road. I have a steel too but find it a bit awkward given it's only 3'' in length.
-

My tools. I love sharpening, it's a meditating procedure.
-
My tools. I love sharpening, it's a meditating procedure.
I agree. Although I do remember that early on it was sometimes anything but meditative.
-
Nice bit of kit KK
I agree that it is a very rewarding and meditative thing when you get good at it but before you get good (as sak said) it is sometimes rather frustrating
:D -
My tools. I love sharpening, it's a meditating procedure.
Nice. I too find the process very relaxing. Since getting my dual whetstone I've gone thru and edged up all my kitchen knives, many of my fixed blades and several other sharps.
-
I passed through the sharpening iliteracy and fear phase (lasted 25 years), the sharpening frustration phase (lasted a couple of weeks) and now I am in the adequate sharpening skills phase for some 5-6 years. So, the frustration phase was the shortest in my history. One shouldn't let fear stop him from proceeding. If you make a blade dull, just sharpen it again. If you scratch it, leave it scratched. It would be a user blade anyway if it needed sharpening. Showpieces don't get much use, so they don't need sharpening.
All my tools are dead cheap, costing from 1 to 18€. I also use a leather belt from my Heavy Metal teens for stropping (and my jeans of course). -
That's a very basic setup, pretty much like mine!

-
That pugmy steel rod is from Opinel?
What do you have to say about the DC4 and the Buck oil? -
@kkokkolis said:
That pugmy steel rod is from Opinel?No, it came with a Zermatt belt sheath.
What do you have to say about the DC4
The DC4 stone has diamond and ceramic sides. I bought it for use on the U2 knife but it works great on SAKs, and fast too. You don't need any oil to use it.
and the Buck oil?
Is for use with the Arkansas stone. I can't really tell you about its quality since I don't have anything to compare it to. It seems to work fine.
-
How do you find the mini steel in use RoSchro?
-

I'm repeating myself.
I just saw I already wrote about this at the end of February (I didn't have a pic then). -
most of mine, as there seems to be much interest for sharpening this last week in the forum in different threads








-
@ThePeacent said:
most of mine, as there seems to be much interest for sharpening this last week in the forum in different threads







Great kit [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
Nice bunch of sharpening equipment Peacent

-
-
For all the knives that I carry I use an EZE-LAP Model "M" round diamond sharpener and finish with a few light strokes on my Victorinox Pocket Steel.
Normally, once a knife has been sharpened, I just use the Pocket Steel regularly to keep it that way.
For serrated edges I use the small EZE-LAP tapered diamond sharpener.
I use the small end of the taper and rake it back and forth length wise on the serrations....that way it sharpens all the small curved edges without changing the shape.
Click on picture for best picture.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login