Multitools vs. SAK multis
-
/post/1230922
-
/post/1046478

-
/post/1230922
Hey that's the one I saw! Good find Aloha.
Syphs Ti 58mm with honey bee blade is so darn sweet. I dreamed of that SAK for months afterwards.
-
I usually get one of my MT for anything I need to do, from (un) screwing some screws to cut open a box to change the filter of the faucets (excuse me if they have a proper name, I'm not aware of it). I use my only SAK mainly for the blade or to open a beer. but then... it's a picknicker, it doesn't have much tools anyway...
I love my crunch when it comes to squeeze down something
-
@danilo said:
I usually get one of my MT for anything I need to do, from (un) screwing some screws to cut open a box to change the filter of the faucets (excuse me if they have a proper name, I'm not aware of it). I use my only SAK mainly for the blade or to open a beer. but then... it's a picknicker, it doesn't have much tools anyway...I love my crunch when it comes to squeeze down something
Nice to hear the different opinions on this

Never really quite had the idea so many guys would reach out for their Multi's or Sak's to use as tools with real proper tools close and readily available to use, and only using them when ever the Multi os Sak wasn't up to the job

I've always view'd a Multi as either a portable "toolbox" for small quick tasks (small assembly, adjusting, etc...) in that makes no sense in bringing along a full dedicated tool box, or to use in situations when you need a tool to fix something in a pinch and you are not near "real" tools or have any with you, but never to use as a primary "tool box" for most jobs.
Maybe is because i've always been around loads of tools and mechanics all my life (influences from my Dad and Granddad), that it makes more sense to me when doing an intensive tool usage job or task if i need a pliers to grab a proper pliers (right size and type) for the job than folding or unfolding a MT to get the pliers out and use it, than needing a screwdriver and folding or unfolding the MT again to use the SD when i can just grab a real SR (right size and shape), or any other tool i might need... :ahhh
But it's worth mentioning, i don't really use or need to use tools professionally, if i did i would probably go to a MT more often for the light weight and portability VS a real tool box.
I probably have more professional dedicated tools as a "non professional" tool user than some some professionals do...

From pliers os all sizes and shapes, to wrenches, to screwdrivers, to hammers, to saws, to dedicated car tools, to power tools of all kinds, to electricity/electronics tools, to... :ahhh :ahhh
Ok, i'll shut up now, before you all burn the heretic....
:ahhh
:ahhh
>:D -
But it's worth mentioning, i don't really use or need to use tools professionally, if i did i would probably go to a MT more often for the light weight and portability VS a real tool box.
[...]I'm under the impression it would be the contrary for me: if I were to use tools professionally, I may have better specialized tools, and wouldn't use MT that much... but who knows, I just use the tools for small stuff at home, fixing electronics things and the like...
in any case, since I have spent a considerable amount of money on multitools, it makes sense to use them, don't you think? :)
Danilo
-
But it's worth mentioning, i don't really use or need to use tools professionally, if i did i would probably go to a MT more often for the light weight and portability VS a real tool box.
[...]I'm under the impression it would be the contrary for me: if I were to use tools professionally, I may have better specialized tools, and wouldn't use MT that much... but who knows, I just use the tools for small stuff at home, fixing electronics things and the like...
in any case, since I have spent a considerable amount of money on multitools, it makes sense to use them, don't you think? :)
Danilo
You're right, i forgot to mention the context in what i think the MT would be better to use professionally, i was referring to small adjusting or assembly jobs not to tool intensive that would pay off in portability and weight just to take an MT along :)
Of course it makes all the sense to use them, but i was just refereeing to the specific scenario when you have your "regular" tools near you to use but choose to use a MT instead...

-
I'll use professional, dedicated tools when available. The SAKs are for fun, and for outdoors chores where I don't have any other tools.
-
The first MT i got was a hand me down SAK explorer with the old magnifying glasses. I tried carrying leathermans specifically the wave because I was attracted to the big beefy pliers and wire cutter feature. In the end I felt it is a hassle to open up the leatherman just to get to the pliers, i do a lot of wire cutting and plier needs. In the end I moved back to SAKs because it just works.
-
Ok. So what's the least expensive SAK model with pliers on them?
-
Or Angler?
-
Arbitrary webshop: Angler €40.19, Deluxe Tinker €42.93. You can find both new for quite some less.
-
I'll be looking into these more, wouldn't mind having one at some point. But looking at the pliers, they seem to be in a completely different league than the Leathermans. Plus, no wire cutters, hard or soft.
-
A little sidetrack on the topic of using a MT professionally: Some years ago I hired a company to do some electric installation work. That included lots of screwdriving. They arrived in a well equipped van. I left them to their own devices, but before lunch I went by to have a look at their progress.
I got surprised and had some indelicate smurfing thoughts when I realized that the main guy was using a multi-tool for the screwdriving instead of a faster dedicated screwdriver - or better yet, an electric one.
To me a multi-tool makes perfect sense in a professional setting for small tasks that comes up, or when dedicated tools are not possible to drag along or just far away. But if a professional have all the proper dedicated tools well within reach, but instead decide to use a multitool for a major and easily planned task, and then charges by the hour... That company wasn't hired again.
-
Although vics pliers are handy for small jobs,there not a patch on larger LM pliers, don't get me wrong I love sak's but I prefer say the juices pliers as more leverage,I personaly don't find it a hassle opening up a LM or other MT's to get to the pliers etc,it all comes down to what works for you in your life
when I did the maitanence job I had all dedicated tools,but as it was a big building a MT came in handy on more than one occasion, and bigger pliers are very usefull 
-
Interesting debates people.
For me I do not have a job that needs tools (office) - But I am reasonably practical, love DIY, woodwork, and am always fixing things and tinkering around :D
I would say I nearly always do use a SAK or multi over a dedicated tool
- I refuse to use the term* 'real' *or 'proper' tool - as SAKs and multis are proper tools!!
Two reasons for this:
-
I like using them !!
-
They are always, without question, the most convenient to access, at least in my environment
This is because I*** always ***have a SAK in my pocket weekdays
- And usually a pliers based in pocket or on belt at the weekend (Juice or Spirit!)

There are also SAKs and multis scattered** everywhere **around the house :D
...... Bedside drawer, kitchen drawer, in the car, in the desk, bathroom cabinet (Classic for nails), in the occasional table in the hallway - You get the picture :D
I have a reasonable set of tools in my tool box in the garage.
However I do have a Supertool 300 in the cupboard in the garage where my tool box is - I often use that as it saves me the massive inconvenience :o of opening the tool box ;)
Having said all that - I was once in a situation (up a ladder installing a new light on the ceiling, I think) - with my Supertool, when I needed pliers, screwdrivers and blade - It was definitely a bit of a pain opening and closing the whole thing up constantly - Dedicated tools definitely better if you are constantly switching.
The other time I definitely prefer dedicated tools is if I am dong a lot of screwing - (ahem) - Eg assembling something
I don't find the multi SDs that convenient/easy/comfortable for long periods of screwing with multiple screws- Mainly I think as a dedicated SD handle is very comfortable to use - whereas a multi is not
And I have a ratchet SD in my tool box - which of course makes screwing very easy and quick.
Edit PS. And if I am doing a big job, as opposed to fixing/small job/tinkering etc then usually dedicated tools, but occasionally a sprinkling of mulltis too, if the specific tool is needed (eg knife blade/wire striper/file sometimes/small pliers)
So I think in summary - Dedicated tools* always* better and easier - Multis ***always ***more convenient - Available, lighter, more transportable etc etc
My two penneth!!
- I refuse to use the term* 'real' *or 'proper' tool - as SAKs and multis are proper tools!!
-
@kaput said:
I'll be looking into these more, wouldn't mind having one at some point. But looking at the pliers, they seem to be in a completely different league than the Leathermans. Plus, no wire cutters, hard or soft.I bought a SAK Mechanic some time ago just for the Vic pliers. I wanted to try them out. At first I wasn't that impressed with them. Then I figured out their niche in my pocket space. I was trying to use the mechanic as a substitute for my Skeletool. It simply feels don't stack up in the plier dept.
However once I started treating more like squirt pliers. They became more useful. The mechanic become a great pairing with a folder for like duty days.
It's my second most carries SAK now. Only behind my rambler that's on my keychain.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login