SAK pocketclip
-
You may be on to something here

-

just remember that the scales can come off, not sure if the torque on the clip would be beyond the tolerances of the scale attachment system.
I do see some great possibilities with this approach, especially on thinner SAKs.
-
just remember that the scales can come off, not sure if the torque on the clip would be beyond the tolerances of the scale attachment system.
I do see some great possibilities with this approach, especially on thinner SAKs.
As long as the clip wasn't to tight to the body or thick stock material, plus the epoxy may help as well.

-
I'm no modder, but it seems like it would have to be made from spring steel, which I'm not sure where you'd get, and also, what spring steel is like to work with. Also, it would have to have a few tricky bends in it to get it parallel with the scales. Might be easier to use the tweezers slot in order to stay away from the corkscrew or phillips, but I'd rather give up the toothpick. Why don't one of you REAL modders come up with a prototype, and if it works, you could make 'em and sell 'em to the Not-so-talented. I know I'd buy one.
-
@tonyg said:
I'm no modder, but it seems like it would have to be made from spring steel, which I'm not sure where you'd get, and also, what spring steel is like to work with. Also, it would have to have a few tricky bends in it to get it parallel with the scales. Might be easier to use the tweezers slot in order to stay away from the corkscrew or phillips, but I'd rather give up the toothpick. Why don't one of you REAL modders come up with a prototype, and if it works, you could make 'em and sell 'em to the Not-so-talented. I know I'd buy one.An old jigsaw blade that is then ground down is a suitable steel as long as you anneal it before bending.
-
A suspension clip can do the same job, attached to the lanyard ring.
-
I did a little something on my sak, there not the plastic 91 scales, but fig maybe give you an idea.. I used nite ize pocket clips, they do have a diff one that is plastic and might work better being lighter weight, just remember like detron said those scale do just pop off!
JR -
I added one to my Tinker /post/945277
-
This method would concern me due to the relative ease with which cellidor scales can be removed.
I think the best method of adding a pocket clip to a cellidor scale model is a P7 clip on the keyring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

