Lefties Versus Denmark
-
No, it's not a Battle Royale, it is a question I have had for a while, and not one that I have ever really had answered to my satisfaction. I am not a Leftie or a Southpaw, although I do play hockey and bat in baseball both left and right handed- which admittedly means very little.
What I am is a Leftie sympathizer- left handed people make up approximately ten percent of the world's population, and, as right handed skills such as writing start to dwindle, I imagine the percentage of left handed people will start to increase. Plus, with the number of cheap products available nowadays for left handed people, there is even less reason for Southpaws to make the long and difficult switch to right hands.
If the ten percent figure is accurate (I got it form Google moments ago, and we all know that the internet is always
rightcorrect), that means there are roughly 32 million left handed people in the US alone. That's a sizeable demographic to be certain, and yet we still don't see many left handed multitools. Now, for the most part multitools are largely ambidextrous, but most of the one handed opening blade types (like the Wave, the Charge, the Surge, the Center-Drive, the Reactor etc) all suffer from being primarily right handed. Yes, I know you industrious, borderline ambidextrous Lefties get by, but really, why should you have to?Now bring Denmark into the equation- how? Simple- one handed opening blades weren't legal in Denmark until recently, so Leatherman offered a version of their one handed opening blades in Denmark only with nail nicks instead of opening holes. Now, according to Google yet again, the entire population of Denmark is 5.676 million, or well shy of the estimated 32 million left handed people in the US alone.
That seemed odd, again, assuming similar percentages of the population are likely to carry multitools, which is probably not accurate as Leathermans are very expensive in Scandinavia. But, let's just assume a similar percentage for the sake of argument, that still leaves a much larger market of left handers, especially if you go worldwide.
I asked someone at Leatherman about this once, and I was told it was due to the grind/lock mechanism. The blades apparently are stacked in a machine that feeds them one at a time into the grinder where an angle is ground into the end for the liner lock to butt against. A left handed blade would require that angle to be ground opposite to what they are currently cutting, and apparently it is easier to just not cut a hole in the blade and instead grind a nail nick than it is to stick the blades into the automatic grinding machine backwards.
Maybe I need to see the machinery they are using to make sense of this, but it really does seem like a no brainer, especially given the huge potential audience for a left handed tool- one that is actually made for use by left handed people.
Am I alone in this? How many Southpaws have we got here?
Def
-
That is actually a fair chunk of the market with a sub par product selection. Interesting.

I think other factors might be more important than the technical one here. Specifically the logistics and retail/ commercial considerations of having a separate lefties model vs something else.
There is likely little difference from a logistics perspective between carrying a specialized lefties model and distributing an entirely new model. The lefties model will be interesting for 10% of the market, while a new model will be interesting for close to 100% of the market.
From a retailers perspective the same will be true. Thus retailers might prefer to spend their precious shelf space on a model interesting to the entire market rather than a subset 10% of the market. It might be hard to sell a specialized lefties model to the general retailers for that reason.
Interesting theme though. Just looking at the numbers there should be a big market. Of course lefties do buy multi-tools today too, but as a competitive edge and with online shops supplementing retail there should be a fairly decent market niche.
-
/topic/34464
So many polls, and some are not mine...
-
I've noticed Fallkniven knives have nail nicks on both sides. I like that, because it adds to the symmetry. I don't like linerlocks but like you I've wondered why most are for right hand use only.
-
When targeting the likes of the Danish, you do open up a catchment for other areas too. For example in Germany the knife can be one hand opening OR locking, so making it two hand opening for Denmark but still locking means that you have by default made it legal in Germany too. I am surprised that more companies don't make UK legal stuff for the same reason, as this would often be appealing to more than just the target audience, whereas left handed tools are only appropriate for left handed people or very dedicated collectors.
I do agree on the disparity with accommodating Lefties though. Also, based on an earlier survey here, he have (or at least had) a disproportionately high number of left handed people. That said, many left handed people become accustomed to operating right handed tools, and when they come across tools which are designed to be used the other way, it's not always that intuitive or comfortable. I searched for ages to get a left handed Wenger for my Father, and although being left handed he was accustomed to using right handed tools, and I watched him struggling to use it, because it was designed the opposite way to how he had always operated a pocket knife. Left handed scissors flummox him too, as he has to use them differently to how he has used scissors all his life.
-
Yes, makes perfect sense to make tools as ambidextrous as possible. Two nicks - how hard can it be?
-
Bi is the way to go these days.
-
Perhaps it is because the general public that will complain for the sake of complaining will have something to say. Remember the craziness that went on with the '08 Soldier?
For years there were forums, blogs, articles and videos made by people from all walks of life and there was the general consensus that combo blades suck for two reasons - the serrated part was too short to be effective and serrations are more useful towards the tip while a straight blade is more useful towards the handle. How Vic came up with their design choices is their thing, but all of a sudden there was a knife that had exactly what was suggested to be the perfect answer. And the response from those exact people who were preaching beforehand? They hated the design for the most part.I'm not sure the world is ready to embrace a design that is acknowledging different needs of a very significant minority
-
@Vidar said:
That is actually a fair chunk of the market with a sub par product selection. Interesting.
I think other factors might be more important than the technical one here. Specifically the logistics and retail/ commercial considerations of having a separate lefties model vs something else.
There is likely little difference from a logistics perspective between carrying a specialized lefties model and distributing an entirely new model. The lefties model will be interesting for 10% of the market, while a new model will be interesting for close to 100% of the market.
From a retailers perspective the same will be true. Thus retailers might prefer to spend their precious shelf space on a model interesting to the entire market rather than a subset 10% of the market. It might be hard to sell a specialized lefties model to the general retailers for that reason.
Interesting theme though. Just looking at the numbers there should be a big market. Of course lefties do buy multi-tools today too, but as a competitive edge and with online shops supplementing retail there should be a fairly decent market niche.
I had considered the retail related issues and I can appreciate them, having worked in retail in the past. And, as a retailer, I may not be interested in purchasing left handed models in quantity because of the limited market as stock that just sits is not ideal.
However, i would probably try to keep a few in stock because I can imagine that left handed models would sell greater than 10% of the total of that model because of the lack of choice. For example, right handed users that want a one handed opening tool have the option of the Skeletool, Charge, Wave, Surge, Center-Drive, Reactor etc, while left handed users that want a left handed tool would only be able to buy the left Handed Charge (or whatever model) since there wouldn't be any alternative.
And, designing a whole new model takes time, effort and money, while modifying an existing design is much cheaper- and let's face it, there is the potential for a major marketing coup by being the first ones to bring such a tool to the market.
Def
-
-
@50ft-trad said:
When targeting the likes of the Danish, you do open up a catchment for other areas too. For example in Germany the knife can be one hand opening OR locking, so making it two hand opening for Denmark but still locking means that you have by default made it legal in Germany too. I am surprised that more companies don't make UK legal stuff for the same reason, as this would often be appealing to more than just the target audience, whereas left handed tools are only appropriate for left handed people or very dedicated collectors.I do agree on the disparity with accommodating Lefties though. Also, based on an earlier survey here, he have (or at least had) a disproportionately high number of left handed people. That said, many left handed people become accustomed to operating right handed tools, and when they come across tools which are designed to be used the other way, it's not always that intuitive or comfortable. I searched for ages to get a left handed Wenger for my Father, and although being left handed he was accustomed to using right handed tools, and I watched him struggling to use it, because it was designed the opposite way to how he had always operated a pocket knife. Left handed scissors flummox him too, as he has to use them differently to how he has used scissors all his life.
I'd considered that as well.... except that as far as I know, the Danish models weren't actually sold anywhere but in Denmark.

And in today's political climate, it seems companies are being pushed more and more to adhere to people's needs rather than allowing people to make do with what is available. Lefties shouldn't have to "make do," they should have their own washroo... uh I mean multitools....
Def
-
Wenger at one time offered a series of left-handed knives. Not only were the nail nicks reversed, but the entire blade sequence was reversed, giving a true left hand knife. They obviously thought the market was worth going after.
-
@Grant Lamontagne said:
However, i would probably try to keep a few in stock because I can imagine that left handed models would sell greater than 10% of the total of that model because of the lack of choice. For example, right handed users that want a one handed opening tool have the option of the Skeletool, Charge, Wave, Surge, Center-Drive, Reactor etc, while left handed users that want a left handed tool would only be able to buy the left Handed Charge (or whatever model) since there wouldn't be any alternative.And, designing a whole new model takes time, effort and money, while modifying an existing design is much cheaper- and let's face it, there is the potential for a major marketing coup by being the first ones to bring such a tool to the market.
Def
All fair points. And certainly for online sales, where shelf space and is less of a concern, you would think left handed models would make a lot of sense.
And of course some right handed people might have dreams of two handed simultaneous multi-tool opening and use just for the dramatic effect. (Or laughter from possibly injuring oneself twice as quick).
-
Just wanted to point out that I've found the Vic 111 series easier to open and close lefty (and I'm a righty).
-
@ColoSwiss said:
Wenger at one time offered a series of left-handed knives. Not only were the nail nicks reversed, but the entire blade sequence was reversed, giving a true left hand knife. They obviously thought the market was worth going after.I have a few of those as well. I really love the concept, although given what has happened to Wenger over the last decade or so they may not be a good example to prove that an idea has merit.
Def
-
SOG seems to have accidentally made some of their tools for left-handed people. Their awl for example cuts on a counter-clockwise turn, a move that should be more natural for a leftie than for a right-handed person. Similarly their semi-serrated blade hides the edge bevel (the blades are chisel ground) from a right-handed user, meaning that you lose some of the benefits including the ability to come up flat to a ruler for marking and in general being less than optimal.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




