84mm SAK love
-
Personally, I prefer the Victorinox scissors too, but the Wenger ones are still more than acceptable.
The only downside that I've found is in trimming nails. The serrations leave a very rough finish to the nail, but the Wengers also have a nail file, so that's easily fixed.

-
Yep, the show stopper for me are the self sharpening scissors... never did prefer them... gotta have scissors on my SAKs... but that locking bottle opener /flat sd sure is nice...
Sent from my iPhone using Tapatalk
-
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes

</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
-
@MacGyver said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes
</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Thanks for all the awesome info MacGyver! Can't wait to look through these threads as soon as I get a chance.
So I was wrong thinking the Evo series having Vic scissors, I should have known from the pics and as you pointed out with the leaf spring vs lever.
I will say I am very impressed with the scissors on my deluxe tinker - I didn't think they'd compare to well to the micras I'd been so used to but I was wrong. They work great and I enjoy having them handy. In fact I've been carrying the SAK this past week and leaving the micra behind. Luckily I have three kids I can pass down to ha ha.Also I have to apologize for hijacking this thread. And then to learn that the evo series aren't even true 84mm's, jeez! I did start taking a fancy to that wood evo 14 as well, but read a review on Amazon that it was about as thick as the explorer, and I think someone also pointed out earlier that the evo scales are quite thick. So, maybe that wouldn't be downsizing at all. As you say MacGyver - nice to handle a few at a local store and yes, I have plenty around me.
-
@MacGyver said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes
</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome

From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
-
@Faddy Daddy said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes

</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome

From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
You're welcome mate, glad i could help in any way

This forum has a world of info on tool evolution and details and lot's of great member's with lots of knowledge, much more than me, i'm sure some of the experts can shine even more light on some of those questions.
If you're interested in info on Vic's tool evolution, this topic and this site are great to learn about tool evolution by year:
</topic/51872
http://victorinox.metodi.me/91mmtools.php#scissors
And some great pictures too

-
@Faddy Daddy said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes :cheers:
Wenger serrated scissor blades...
....they are often stated as being self-sharpening. Is this actually a fact, and can anyone explain how their serrated blades can self-sharpen, whilst Vic bl...
Multitool.Org Forum (multitool.ninja)
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome :like:
From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
Some info here:
http://victorinox.metodi.me/91mmtools.php
Sent from my iPhone using Tapatalk
-
El Tourist
.jpg)
-
Was reading the latest here about 84mm SAKs and had a few pictures to share.
[list type=decimal]
-
The first is a comparison of the 84mm vs 91mm Golfer (I really like both)
-
The 2nd, 3rd, & 4th pictures are of an early 1970's Tinker




-
-
@strmliner said:
Was reading the latest here about 84mm SAKs and had a few pictures to share.[list type=decimal]
- The first is a comparison of the 84mm vs 91mm Golfer (I really like both)
- The 2nd, 3rd, & 4th pictures are of an early 1970's Tinker

-
Tourists...
.jpg)
-
Sportsman.

-
Small Tinker as always...


-
Small Tinker Too !
and Rambler for good measure

-
For those of you who EDC the Tourist, how do you handle the lack of scissors?
Carry a Classic or similar?
Sent from my XT1635-01 using Tapatalk
-
@this_is_nascar said:
For those of you who EDC the Tourist, how do you handle the lack of scissors?Carry a Classic or similar?
Sent from my XT1635-01 using Tapatalk
The Tourist was my first Swiss knife. At the time, I owned a Swisstool CS Plus, and relied upon that for the scissors. It didn't work out, and every Swiss knife I have bought since then has had scissors or been mod fodder.
I still own that Tourist, but it rarely gets carried. Why should I, when there are so many models that have scissors on board? I don't see the point of having to carry a second knife to make up for the shortsightedness in pocketing the first one which has an incomplete tool set. That makes no sense. Occasionally I will pair it with a pliers tool with scissors, but even then, it still tends to lose out on duty time to knives that have them.
-
@50ft-trad said:
For those of you who EDC the Tourist, how do you handle the lack of scissors?
Carry a Classic or similar?
Sent from my XT1635-01 using Tapatalk
The Tourist was my first Swiss knife. At the time, I owned a Swisstool CS Plus, and relied upon that for the scissors. It didn't work out, and every Swiss knife I have bought since then has had scissors or been mod fodder.
I still own that Tourist, but it rarely gets carried. Why should I, when there are so many models that have scissors on board? I don't see the point of having to carry a second knife to make up for the shortsightedness in pocketing the first one which has an incomplete tool set. That makes no sense. Occasionally I will pair it with a pliers tool with scissors, but even then, it still tends to lose out on duty time to knives that have them.
Well said 50ft-trad. I am in complete agreement on the necessity of scissors.
-
@this_is_nascar said:
For those of you who EDC the Tourist, how do you handle the lack of scissors?Carry a Classic or similar?
Sent from my XT1635-01 using Tapatalk
I carry the small tinker/tourist 90% of the time these days, and i've always carried a alox classic sd on my keys. I carry the classic not only for the scissors but also for the nail file, as i like to keep it separate from my main sak use. Since i'm not really a very die hard fan of the scissors or think they are so irreplaceable that a good blade can't do at least 90% of it's job, the size of the classic scissors is enough for nearly all my regular edc tasks.
I do occasionally carry 91mm's, with scissors, but not that often these days. I've decided the 91's are just too big and bulky for most of my edc needs and pocket size carry. Why should i carry a Spartan or Tinker if i have the exact same sak in a shorter, more pocket friendly package that suits most of my needs?
84mm is my perfect sak size, i'll endure the lack of scissors in the current models with the help of my classic.If Vic ever brings back the 84mm scissors models i'll be the first in line to buy them (all... :D)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
